kmarrip / automation_with_arduino

This project lets u control 4 leds connected to the arduino pins with an ir remote

automation_with_arduino

This project lets u control 4 leds connected to the arduino pins with an ir remote

Parts list

TSOP IR receiver

This part lets you convert the incoming ir radiation thats in the form 580kHz square wave into a 5V value. This is done by filtering out the unwanted frequencies

Amazon link for TSOP--https://www.amazon.in/VISHAY-Sensor-Remote-Control-Systems/dp/B01CVF62XA/ref=sr_1_3?ie=UTF8&qid=1549635634&sr=8-3&keywords=tsop ##################################################################################### Arduino micro controller

This is the most important part of the project as u have to code in this micro controller.

Amazon link for arduino--https://www.amazon.in/Uno-ATmega328P-Compatible-ATMEGA16U2-Arduino/dp/B015C7SC5U/ref=sr_1_3?ie=UTF8&qid=1549635694&sr=8-3&keywords=arduino

#####################################################################################

The d type cable

This lets u transfer the complied code from your pc to the micro controller

#####################################################################################

Ir remote

Any Ir remote can be used for this purpose, but u have to make sure that u know the hex values of the buttons before hand