|
Tip
|
You can read this README in a nicely formatted PDF Document. |
This is a ruby implementation of the tool wd (warp directory), originally written as a ZSH module by Markus Færevaag.
I personally went back to bash after trying out ZSH, but it was the wd plugin that I really missed.
While Markus kindly offered a ruby version in a separate branch of this module, it wasn’t quite as extensible as I wanted to (or well tested), so it ended up being an inspiration for this gem.
WarpDir is a UNIX command line tool that works somewhat similar to the standard built-in command cd — "change directory".
The main difference is that wd is able to add/remove/list folder "shortcuts", and allows you to jump to these shortcuts from anywhere on the filesystem.
This of this as a folder-navigation super-charge tool that you’d use on a most frequently-used set of folders. This becomes really useful if you are often finding yourself going into a small number of deeply nested folders with a long path prefix.
Three steps:
-
wdrequires a Ruby interpreter version 2.2 higher.-
Please Check your default ruby with
ruby --version. You should see something like "ruby 2.3.0p0….". -
If you see version 1.9 or earlier, please upgrade your ruby using the package manager native to your OS.
-
-
Install
warp-dirruby gem (note: you may need to prefix the command withsudoif you are installing into the "system" ruby namespace).$ gem install warp-dir
-
The last step is to install the
wdBASH function and auto-completion. This step appends the required shell function to your shell initialization file, that is specified with thewarp-dir install --dotfile <shell-dot-file>command:$ warp-dir install --dotfile ~/.bash_profile Shell support is installed in the following files: /Users/kig/.bash_profile $ source ~/.bash_profile # Now we can use 'wd' shortcut $ wd --help
After the last step you need to restart your session, so — if you are on Mac OS X, — please reopen your Terminal or better yet — iTerm2, and then type:
$ wd helpIf the above command returns a properly formatted help that looks like the image below, your setup is now complete!
|
Note
|
in the below examples, the characters `~ ❯ ` denote the current shell prompt, showing the current folder you are in. The command to type is on the right hand side of the "❯". |
Let’s first bookmark a long directory:
~ ❯ cd ~/workspace/arduino/robots/command-bridge/src
~/workspace/arduino/robots/command-bridge/src ❯ wd add cbsrc
Warp point saved!
~/workspace/arduino/robots/command-bridge/src ❯ cd ~/workspace/c++/foo/src
~/workspace/c++/foo/src ❯ wd add foosrc
Warp point saved!
~/workspace/c++/foo/src ❯ cd /usr/local/Cellar
/usr/local/Cellar ❯ wd add brew
Warp point saved!Now we can list/inspect current set of warp points:
/usr/local/Cellar ❯ wd l
cbsrc -> ~/workspace/arduino/robots/command-bridge/src
foosrc -> ~/workspace/c++/foo/src
brew -> /usr/local/CellarNow we can jump around these warp points, as well as run 'ls' inside (even passing arbitrary arguments to the ls itself):
/usr/local/Cellar ❯ wd cbsrc
~/workspace/arduino/robots/command-bridge/src ❯ wd foosrc
~/workspace/c++/foo/src ❯ 1 wd ls brew -- -alF | head -4 # run ls -alF inside /usr/local/Cellar
total 0
drwxrwx--- 73 kig staff 2482 May 7 15:29 ./
drwxrwx--- 21 kig staff 714 Apr 28 11:40 ../
drwxrwx--- 3 kig staff 102 Dec 24 03:14 ack/If you installed wd properly, it should register it’s own command completion for BASH and be ready for your tabs :)
Note that you can use wd to change directory by giving an absolute or relative directory name, just like cd (so not just using warp-points), so when you type wd <TAB><TAB> you should see the list of all saved warp points as well as all of the local sub-directories relative to where you are at.
# And, it supports command completion in BASH!
$ wd<TAB><TAB>
# should print the list of registered warp points, and commands.
$ wd install --dotfile /Users/kig/.bash<TAB><TAB>
/Users/kig/.bash_login /Users/kig/.bash_profile /Users/kig/.bashrcCommand completion is activated by loading the ~/.bash_wd file that’s installed with warp-dir install command.
All of the mappings are stored in the ~/.warprc file, where the warp point name is followed by a colon, and the path it maps to. So it’s trivial to do a global search/replace on that file in your favorite editor, if, for example, a commond top level folder had changed.
The format of the file was left identical to that of the ZSH version of wd so that one could switch back and force between the two versions of wd and still be able to use their collection of warp points.
See? I think we thought of everything :)
Happy warping!
The overall concept comes from the realization that when we work on the command line, we often do things that wd tool provides straight out of the box, such as:
-
we often have to deal with a limited number of folders at any given time
-
on occastion have to jump between these folders (which we call warp points), which may require mult-level
cdcommand, for example:cd ~/workspace/foo/src/include/; ....; cd ~/Documents/Microsoft\ Word/; ... -
seems like it should be easy to add, remove and list warp points
-
everything should require typing few characters as possible :)
-
it would be great to have full BASH completion support
Some future extensions could be based on some additional realizations:
-
perhaps you might want to inspect a bookmarked folder without leaving your current place.
-
maybe by inspecting we mean — running a
find, orlsor any other command for that matter
-
instead of
wd add!usewd add -f <point>(or --force)
These features will be added shortly:
-
for now
wd cleanis not supported -
for now history is not supported
-
for now '-' is not supported
Questionable value, but this sort of interface appear a bit more consistent.
Still I am not sure I want to type wd -j proj or wd -a proj instead of wd proj and wd add proj…
wd -j/--jump point
wd -a/--add point
wd -r/--remove point
wd -l/--ls point
wd -p/--path point
wd -L/--list
wd -C/--clean
wd -S/--scan # report whether points exist on the file systemPass an arbitrary command to execute, and return back to CWD.
wd proj -x/--exec -- "command"Can we go across SSH?
wd add proj [email protected]:~/workspace/proj
wd ls proj
wd projThis then establishes and SSH connection to the server and logs you into the shell. Should be pretty easy, I think :)
Fork the repo to your github username, and create a feature branch. Run bundle install.
You can also run bin/console for an interactive prompt that will allow you to experiment.
To submit your change, create a new pull request, and ensure to provide tests for any new code.
Just follow the pattern in the lib/warp/dir/commands/ folder, copy and modify
one of the existing commands. Command class name is used as an actual command.
Add a working rspec.
Bug reports and pull requests are welcome on GitHub at https://github.com/kigster/warp-dir.
This project is distributed under the MIT License.
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent