kamik / un-5.2c-complete

Open-sourced JBC-optimized based on UN5.2C, achieving ultra-small form factor.

UN-5.2C-Complete

This is a JBC-specific soldering control board derived from the latest UniSolder 5.2C. It can be installed in a much smaller case and supplied by 24VDC SMPS to save more rooms. Many metal case with 88X38mm front panel and lots chinese-cloned STM32 "T12" soldering station are compatible with this modified version of UN5.2, which further reduces the cost and complexity of this project.

Remember, it is UniSolder still; which means it can also accommodate many other irons. Same feature like the original UN. But with JBC iron and working as JBC controller, makes it become more valuable, excellent soldering station. The JBC C210, C245 or even C247 series irons can be used, depending on the supplied voltage and needs.

Do it at your own risk. The files are provided "AS-IS".

Unfortunately, you have to be a bit familiar with the original UN project. You can generate BOM by using Altium. Further files such as BOM and manual will be released soon.