josecostamartins / qmk_firmware Goto Github PK

The file https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/halconf.h was copied from the clueboard_60 version and was not modified, there needs to be some checking if the current version is compatible with anne pro

https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/matrix.c

Again, https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/boards/GENERIC_STM32_L151C8/board.h has a lot of parameter that needs definition and GPIO pins assignment is one of them.

use clueboard as a starting point

find the correct parameters to put in this file: https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/boards/GENERIC_STM32_L151C8/board.h

use clueboard as a starting point

Check if the contents of mcuconf.h are compatible with STM32L151xx

file: https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/mcuconf.h

find correct version to put on this file: https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/bootloader_defs.h

Based on http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf the bootloader addres should be 0x1FF00000, but that should be further investigated.

The reference manual (http://www.st.com/content/ccc/resource/technical/document/reference_manual/cc/f9/93/b2/f0/82/42/57/CD00240193.pdf/files/CD00240193.pdf/jcr:content/translations/en.CD00240193.pdf) apparently does not show anything of use from the bootloader (but that should be investigated further also)

check if the settings in https://github.com/josecostamartins/qmk_firmware/blob/anne_pro/keyboards/anne_pro/chconf.h are compatible with the Anne pro ARM chip