joric / arduino-bitcoin-miner Goto Github PK

im using particle photon

ICA 0: Comms error (werr=1)

got any ideas?

Have anyone connected this program directly to the pool through a wifi connection in the microcontroller? If you have any leads regarding direct pool connections please help.

I'm trying to connect to this specific pool:
https://slushpool.com/help/manual/stratum-protocol#download

With the Lolin v3 ESP8622 microcontroller

I have this board that It has some useful Memory. Can you easly implement Scrypt?
I can give a try

sketch_may13a.ino:10:21: error: expected unqualified-id before numeric constant
/usr/share/arduino/hardware/arduino/variants/standard/pins_arduino.h:47:22: note: in expansion of macro ‘LED_BUILTIN’
static const uint8_t LED_BUILTIN = 13;
^
sketch_may13a.ino:13:23: error: variable or field ‘sha256_transform’ declared void
sketch_may13a.ino:13:23: error: ‘SHA256_CTX’ was not declared in this scope
sketch_may13a.ino:13:35: error: ‘ctx’ was not declared in this scope
sketch_may13a.ino:13:40: error: expected primary-expression before ‘const’

какой порт выберать на виндоус для ардуины нано(я знаю что моя ардуинка определяется как com6, но при выборе этого порта майнер не видет ардуинку)

Hi, Whom may concern,

I am trying your code to access my small ESP32 board to know what different is than other builder.
I have a problem to connect the device in win10, although I have successfully upload the compiled program.
My command line is as following:
\\bfgminer-5.4.2-win64\mn.exe -o stratum+tcp://address:port -u wallet.esp32 -p x -S bfl@\\.\COM3

It is responding a fail message in the miner that cannot open the device of port (mine is COM3).
Do not have user privileges required to open \.\COM3

However, if I use serial monitor, it can get response when I enter.

23:23:59.703 -> ESP-ROM:esp32s3-20210327
23:23:59.703 -> Build:Mar 27 2021
23:23:59.703 -> rst:0x8 (TG1WDT_SYS_RST),boot:0xb (SPI_FAST_FLASH_BOOT)
23:23:59.703 -> Saved PC:0x420068c7
23:23:59.703 -> SPIWP:0xee
23:23:59.703 -> mode:DIO, clock div:1
23:23:59.703 -> load:0x3fce3808,len:0x44c
23:23:59.703 -> load:0x403c9700,len:0xbe4
23:23:59.703 -> load:0x403cc700,len:0x2a38
23:23:59.751 -> entry 0x403c98d4

I am not sure any wrong step, but could I have tip from your help?
Thank you very much.

Looks like bytes are recived (in Arduino Leonardo) but bfgminer got this error.

Command:
bfgminer -o pool -u user -p pass -S ica:\.\COM3 --icarus-options 115200:1:1

I am interested in your project. But why does this happen?

If it's a version issue, I'll check it out. Are STRATUM mining not supported? I am using BFG 5.2.