This package helps you to send mails from your Laravel application from multiple email accounts.
The package supports sending queued, localized and bulk mails.
This package works for SMTP and log drivers.
Laravel 5, 6 or 7
Install the package into your Laraval application with composer:
composer require iwasherefirst2/laravel-multimail
Publish the config file:
php artisan vendor:publish --provider="IWasHereFirst2\LaravelMultiMail\MultiMailServiceProvider"
Configure your email clients in config/multimail.php:
'emails' => [
'[email protected]' =>
[
'pass' => env('first_mail_password'),
'from_name' => "Max Musterman",
],
'[email protected]' =>
[
'pass' => env('second_mail_password')
],
],
Make sure to put your credentials in the .env file, so they don't get tracked in your repository.
For each mail you may specify multiple columns:
| Attribut | Functionality | required |
|---|---|---|
pass |
Password of email account | yes |
username |
Username of email account, only neccessary if different from email address | no |
from_name |
Name that should appear in front of email | no |
provider |
Provider of email account, only necessary if mail host/encription/port is not default (see here for more) | no |
One may send a mail using \MultiMail instead of \Mail. The methods to, cc, bcc, locale are exactly the same as provided by the mail facade (note that locale is only available since Laravel 5.6).
The from method from MultiMail needs a string of an email provided in config/multimail.php. When using send or queue the mail will be send from the mail account specified in cofing/multimail.php.
This example assumes that [email protected] and [email protected] have been specified in config/multimail.php.
// Send mail from [email protected]
\MultiMail::to($user)->from('[email protected]')->send(new \App\Mail\Invitation($user));
// Send from malaccount [email protected]
\MultiMail::to($user)->from('[email protected]')->locale('en')->send(new \App\Mail\Invitation($user));
Queued mails work exactly the same as for the normal Mail facade,
i.e. they are either send explicitly be the queue method or the mailable class implements the ShouldQueue contract.
// Queue Mail
\MultiMail::from('[email protected]')->queue(new \App\Mail\Invitation($user));
It is of course necessary to install a queue driver.
You may set to, cc, bcc, locale and from in your mailable class. In this case, you could reduce the basic example from above to:
// Send mail from [email protected]
\MultiMail::send(new \App\Mail\Invitation($user));
Mailable:
/**
* Create a new message instance.
*
* @return void
*/
public function __construct($user)
{
$this->to = $user;
$this->fromMailer = '[email protected]'
$this->locale('en');
}
/**
* Build the message.
*
* @return $this
*/
public function build()
{
return $this->markdown('emails.invitation')
->subject('Invitation mail');
}
For bulk messages, you may first require a mailer object. You can define a pause in seconds ($timeout) after a number of mails ($frequency) has been send.
$mailer = \MultiMail::getMailer('[email protected]' , $timeout, $frequency);
Then you can iterate through your list.
foreach($users as $user){
$mailer->send(new \App\Mail\Invitation($user));
};
If you wish to send from mails with different provider, then you may create another provider in the provider array and reference it inside the emails array:
'emails' => [
'[email protected]' =>
[
'pass' => env('first_mail_password'),
'username' => env('first_mail_username'),
'from_name' => "Max Musterman",
// <------ no provider given because 'default' provider is used
],
'contact@other_domain.net' =>
[
'pass' => env('second_mail_password'),
'username' => env('second_mail_username'),
'from_name' => "Alice Armania",
'provider' => 'new_provider', // <------ specify new provider here
],
],
'provider' => [
'default' =>
[
'host' => env('MAIL_HOST'),
'port' => env('MAIL_PORT'),
'encryption' => env('MAIL_ENCRYPTION'),
'driver' => env('MAIL_DRIVER'),
],
'new_provider' =>
[
'host' => env('MAIL_HOST_PROVIDER_B'),
'port' => env('MAIL_PORT_PROVIDER_B'),
'encryption' => env('MAIL_ENCRYPTION_PROVIDER_B'),
'driver' => env('MAIL_DRIVER_B'),
// you may also add options like `stream`, `source_ip` and `local_domain`
]'
],
You may provide default credentials inside the email array from config/multimail.php:
'emails' => [
'[email protected]' =>
[
'pass' => env('first_mail_password'),
'username' => env('first_mail_username'),
'from_name' => "Max Musterman",
],
'[email protected]' =>
[
'pass' => env('second_mail_password'),
'username' => env('second_mail_username'),
'from_name' => "Alice Armania",
],
'default' =>
[
'pass' => env('MAIL_PASSWORD'),
'username' => env('MAIL_USERNAME'),
]
],
When first_mail_password and first_mail_username are empty, [email protected] will use credentials specified by default. This is useful for your local development, when you want to send all mails from one mailaccount while testing. This way you only need to specify MAIL_PASSWORD and MAIL_USERNAME locally.
Do not specify any email accounts in your local .env. Otherwise you may risk to send testing mails to actual users.
Use log driver or setup a fake mail SMTP account like mailtrap or similar services.
It is not needed to specify the same credentials for all your email accounts. Instead, simply provide a default mail account (see above Default mail account).
To avoid latency, I recommend to always use the log mail driver when phpunit is running. You can set the mail driver in your phpunit.xml file like this: <env name="MAIL_DRIVER" value="log"/>.
If you want to use the mocking feature Mail fake during your tests, enable use_default_mail_facade_in_tests
in your config file config/multimail.php. Note that assertQueued will never be true, because queued mails are actually send through sent through a job. Therefore, always use assertSent.
Please update to version 1.2.2 to support Laravel 7
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent