iot-alex / atmelsigfoxshieldex

#Example Sketch for the Atmel ATAK55002 Arduino Shield

##Use

Test for Atmel SIGFOX shield ATAK55002-V2.

This Arduino sketch sends power supply voltage measure and temperature measure every 15 minutes (or when shield button is pressed), using SIGFOX network.

This sketch uses the Atmel SIGFOX shield library included.

---

This library is free software; you can redistribute it and/or modify it under the terms of the GNU Lesser General Public License as published by the Free Software Foundation; either version 2.1 of the License, or (at your option) any later version.

This library is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more details.

##Frame composition

This example only uses 3 bytes, out of the maximum 12 bytes that can be sent over SIGFOX.
Power supply voltage in coded on the 2 last bytes, in mV.
Temperature is sent as an integer on one byte, in °C.

###Example

Frame sent : 000000000000000000190CA3

• Power supply voltage
  • 000000000000000000190CA3
  • 0CA3₁₆ == 3235₁₀
  • Voltage is 3235 mV
• Temperature
  • 000000000000000000190CA3
  • 19₁₆ == 25₁₀
  • Temperature is 25°C

##Get Hardware

• Arduino Uno
• Atmel Shield

##Credits

Copyright (c) 2015 Daniele Denaro and

• FuturaGroup srl (www.futurashop.it)
• Open-Electronics (www.open-electronics.org)
• Atmel Corporation.

All right reserved.