iobroker / iobroker.vis.cordova

Cordova APP for ioBroker.vis

ioBroker.vis.cordova

по русски

auf Deutsch

WEB visualisation for ioBroker platform as android App.

This app is designed to run on mobile phones and tables. it stores the vis project and all images on the mobile phone to save the mobile traffic.

Usage

This app required the installed and running web adapter or socket-io adapter and installed vis adapter. If web server is activated, so internal socket-io interface must be activated. In vis some project should exist, e.g. "main".

The ports and the ioBroker server must be reachable from the mobile phone.

Install app via App Store. After starting the app for the first time the settings dialog should be opened automatically. To start work with an app see settings.

To show settings press semi-transparent button with "..." in the top left corner.

Settings

Almost all settings are optional except "WI-FI Socket" and "Project".

Buttons

• Reload - Just restart the web engine, like you press the "Refresh" button in your browser.
• Re-sync - If some changes were made on the vis project, it will be not automatically loaded into app. To do that the "Re-sync" button must be pressed. All project files and images will be loaded anew on the phone. It is done to save the mobile traffic and to speed up the start of application. Because read from internal SD-Card is much faster than from ioBroker server. If the option * Sleep in background * is activated, the phone must be active during the whole synchronization phase, otherwise the socket.io connection will be interrupted and the synchronization is aborted.
• Ok - save all changes and restart the engine. No synchronisation will be done if the project was yet defined. To load changes from ioBroker vis project use "Re-sync" button.
• Cancel - discard all changes and close dialog.

Connectivity

App can detect via SSID name if the mobile phone in the home (trusted) network or outside home network and use for home and outside connection the different socket URLs and login data.

Normally in the home network there is no authentication and connection is via HTTP (insecure) but from outside network the connection goes via https (secure) and with login/password.

• Connected - shows if the app is connected with ioBroker server.
• WIFI SSID - name or names (divided by the comma) of home SSID to use home credentials for authentication and home URL for connection.
• WIFI Socket - URL like http://192.168.0.5:8082. It is important to have http or https at the start, so app can distinguish between secure and insecure connections. Port is important too. Normally 8082 for web or 8084 for separated socketio.
• WIFI User - if for the socket communication the authentication is enabled, write here the username from iobroker. User must be first created via "admin" interface. The user "admin" exists always and cannot be deleted.
• WIFI Password - user password as set in the ioBroker
• WIFI Password repeat - repeat user password here

Following settings are active only if some SSID specified and the device is currently outside this SSID Wi-Fi network.

• Cell Socket - same as WIFI Socket, but will be used outside home network.
• Cell User - same as WIFI User, but will be used outside home network.
• Cell Password - same as WIFI Password, but will be used outside home network.
• Cell Password repeat - same as WIFI Password repeat, but will be used outside home network.

Note: the global CSS file will not be processed by application. To use these styles in specific project they should be copied into project CSS file.

Project name and settings language

• Language - language of the setting dialog. English, German and Russian languages are supported. To activate changes press OK button.
• Project - project name from ioBroker. If no project name shown, so there is no connection with iobroker or no one project is exist.

Visualisation and behaviour

• Orientation - Orientation of view: auto, landscape or portrait. If *auto selected the orientation will be detected automatically.
• Prevent from sleep - if activated, the device will never go into sleep mode and display will be always on. (Does not work an all devices)
• Allow window move - if pan and zoom via touch is allowed on the views.
• Full screen - use full screen mode on devices with software buttons (home, settings, back).
• Zoom Level Portrait - Zoom level in percent of views in portrait mode. Do not set too small level, because you will not be able call the settings dialog. Default settings is 100% and you cannot set values below 20%.
• Zoom Level Landscape - same as Zoom Level Portrait, but for landscape view.

Other settings

• Substitution URL - if your vis project uses the links for images from some local network URL, that differs from ioBroker URL, you can specify here this URL and all images from this server, that used in the vis project, will be loaded on the mobile phone too.
• Instance - Unique instance ID of this VIS. It is required to send targeted commands to only this vis instance. (See Control interface for details)
• Sleep in background - If vis app is not shown (but runs in background) you can stop any communication from the vis app to the ioBroker server. In this case the state updates and commands from ioBroker will not be delivered to app if the app runs in background.
• Read always config from server - Do not cache any files on the phone

Speech recognition

You can activate speech recognition from the application. If this option is activated, the app will constantly try to recognise some commands. To determine if you are speaking with app or with someone else the key word or key phrase can be specified. Please select some word that can be good recognised and not used in everyday use.

To detect commands in recognised text the text2command adapter will be used. Please read description of this adapter on github or on (iobroker.net)[http://iobroker.net]. Of course one instance of text2command adapter must be installed.

Note: in this case all voices will be sent to Google servers if no offline recognition activated. Activation instruction can be found here.

Note: in recognition mode the android engine makes "BEEP" every 10-15 seconds. To suppress this the volume will be set to 0. You still can use "text2speech" engine and "playSound" command to play some audio or say tome phrases.

• Speech recognition active - if speech recognition is active or not.
• Keyword - If in the recognised sentence this word (or phrase) will be found, this text will be sent to "text2command" instance for analyse. It is not required to have keyword on the start of the sentence. You can omit key word in this case all phrases will be sent to text2command for analyse.
• Text2command instance - number of text2command instance. Normally 0.
• Volume - volume for answers and for text-to-speech commands. All other time the volume will be set 0.
• Default room - if your mobile device is fixed in some specific room, e.g. in sleeping room. There is no need to sy every time "Switch the light on in sleeping room", it is should be enough to say ""Switch the light on". To enable that the default room name can be specified. If text2command does not find any room name in the phrase it will take default room name for command execution.
• Response over TTS - if activated the answers from text2command will be synthesised via text-to-speech engine. Of course some TTS Engine must be installed and activated on android device.

Battery and location

There is a possibility to report position and battery status to the server.

• Device name - device name is used to create states on the server (see below).
• Report battery status - if battery status must be reported to server or not. Only changes of battery level or plugged state will be reported. No cyclic update.
• Position poll interval (sec) - If position should be reported to server. Position is reported on change and cyclic. To disable report of position set interval to zero. (E.g. to save the battery)
• High accuracy position - If position must be high accuracy or not. In high accuracy mode more battery drain.

Following states will be created if battery status reporting is activated:

• vis.0..battery.level - the battery charge percentage.
• vis.0..battery.isPlugged - a boolean that indicates whether the device is plugged in.

Battery status will be updated when the battery charge percentage changes by at least 1 percent, or when the device is plugged in or unplugged.

Following states will be created if position poll interval is not zero:

• vis.0..coords.latitude - latitude in decimal degrees.
• vis.0..coords.longitude - longitude in decimal degrees.
• vis.0..coords.accuracy - accuracy level of the latitude and longitude coordinates in meters.

Following states are not available on all devices:

• vis.0..coords.altitude - height of the position in meters above the ellipsoid.
• vis.0..coords.altitudeAccuracy - accuracy level of the altitude coordinate in meters..
• vis.0..coords.heading - direction of travel, specified in degrees counting clockwise relative to the true north.
• vis.0..coords.speed - current ground speed of the device, specified in meters per second.
• vis.0..coords.speedKm - current ground speed of the device, specified in km per hours.

Access to the images and other resources

The App copies the view file of the selected project and all referenced images during the synchronization to the phone (internal memory). There is no automatic update so you have to restart the re-synchronization manually. The following content will be copied to the phone:

• The view files and all other files in the directory of the chosen vis project with one of the following file extensions: .png .jpg .jpeg .gif
• All image files with file extension .png .jpg .jpeg .gif and files with file extension .wav .mp3 .bmp .svg, which are in a adapter directory below [iobroker data directory]/files/ and which are referenced inside the view definition file of the chosen vis project. The fist sub directory below [iobroker data directory]/files/ must contain the char "." in his name otherwise the files inside will not be copied.

To allow the app to replace the paths correctly, the files must be specified with an absolute local path (for example, /vis.0/main/img/test.png). Relative paths are not supported. If paths to resources are embedded in HTML inside widgets, the syntax must be exactly match the following pattern ... src='/vis.0/main...' or ... src ="/vis.0/main...". Other notations are not recognized. Additionally, you can configure an Substitution URL in the setting dialog. This URL points to the external URL of the Web server of VIS or another local web server. All found references to URL found in the view definition which starts with the configured Test are downloaded to the device and the URL will be changed to the local path during the synchronization. Please note that this substitution is not implemented for embedded links in html code(e.g. https://[your domain]/visweb).

The replacement of paths at runtime is currently limited to the following widgets:

• basic string (unescaped)
• basic string src
• basic json table

Since the values are transmitted at runtime, the files are only transferred to the device if they are located in the project directory or have been referenced by another statically configured widget. There is no load mechanism of missing pictures. The icon collections offered as separate ioBroker adapter are not part of the app, but will also be copied during the synchronization phase if the images are referenced in the views.

Your can access other resources within the app if you use full paths starting with http:// or https://. These files are not loaded locally during the synchronization but loaded directly from the respective server via http:// or https:// if the view is shown in the app. If you use a reverse proxy with http authentication, the credentials can be embedded in the URLin the following form: https://[username]:[password]@[my domain]/vis.0/main/...

Using Web modules of other adapters as VIS

Other adapters as VIS can also deliver web content. This content can be displayed within the vis views in iframes. This is particularly true for the adapters Flot and Rickshaw charts.

Currently, only the client components of the following adapters are integrated in the app:

• Flot
• Rickshaw

To use the local version of Flot, the source of the iframe must start with /flot/index.html?.

Other content and also the content of other servers such as Webcams can also be shown inside the app, if this is a full URL is used to the server.

Exit of the App

The app can be closed with the home button. However, in this case, the app runs in the background and continues to consume data volume and battery. The option Sleep in background can reduce the consumption. In this case, the socket.io connection is interrupted when the app is inactive. If you close the app by pressing the back button trice within one second, the app will be stopped completely. In addition, the app provides a way to terminate completely. For this purpose, you can insert a basic static link widget in your views containing the following link: javascript:logout () You find here such a Widget to import in VIS:

[{"tpl":"tplIconLink","data":{"href":"javascript:logout ();","target":"_self","text":"","views":null,"src":"/icons-material-png/action/ic_exit_to_app_black_48dp.png","name":"","class":""},"style":{"left":"10px","top":"10px","z-index":"106","background":"none","border-style":"none","color":"#000000","font-family":"Arial, Helvetica, sans-serif","font-size":"large","letter-spacing":"","font-weight":"bold","width":"34px","height":"32px"},"widgetSet":"jqui"}]

or in vis versions newer as 0.10.6

[{"tpl":"tplHtmlLogout","data":{"html":"<button>Exit</button>","in_app_close":true},"style":{"left":"10px","top":"10px"},"widgetSet":"basic"}]

Using App with ioBroker.pro cloud

You can connect to your home via iobroker.pro cloud. To do that:

1. Configure WiFi connection.

Enter your home SSID name to detect if your at home or not. You can just click on "<=" button and the current SSID will be automatically inserted into the corresponding field.

Depends on the SSID name the app will determine if it must use local address (Socket URL on the last picture) or iobroker.pro as connect way.

2. You must enter your ioBroker.pro credentials in "Cell connection" part:

Activate checkbox "Use iobroker.pro" and enter below your login (email) and password for ioBroker.pro cloud.

After that, when you connect via iobroker.pro you will see the small icon in the top right corner for first 10 seconds if connection is via iobroker.pro cloud.

Control interface

Vis creates 3 variables:

• control.instance - Here the browser instance should be written or FFFFFFFF if every browser must be controlled.
• control.data - Parameter for command. See specific command description.
• control.command - Command name. Write this variable triggers the command. That means before command will be written the "instance" and "data" must be prepared with data.

Commands:

• alert - show alert window in vis. "control.data" has following format "message;title;jquery-icon". Title and jquery-icon are optional. Icon names can be found here. To show icon "ui-icon-info" write Message;;info.

• changeView - switch to desired view. "control.data" must have a name of view. You can specify project name too as "project/view". Default project is "main".

• refresh - reload vis, for instance after project is changed to reload on all browsers.

• reload - same as refresh.

• dialog - Show dialog window. Dialog must exist on view. One of:

  • "static - HTML - Dialog",
  • "static - Icon - Dialog",
  • "container - HTML - view in jqui Dialog",
  • "container - ext cmd - view in jqui Dialog",
  • "container - Icon - view in jqui Dialog",
  • "container - Button - view in jqui Dialog".

  "control.data" must have id of dialog widget, e.g. "w00056".

• popup - opens a new browser window. Link must be specified in "control.data", e.g. http://google.com

• playSound - play sound file. The link to file is specified in "control.data", e.g. http://www.modular-planet.de/fx/marsians/Marsiansrev.mp3 . You can upload your own file in vis and let it play as for instance "/vis.0/main/img/myFile.mp3".

• tts - text 2 speech. data - consist phrase, that must be spoken.

If user changes the view or at start the variables will be filled by vis with

• "control.instance": browser instance and ack=true
• "control.data": project and view name in form "project/view", e.g. "main/view" (and ack=true)
• "control.command": "changedView" and ack=true

You can write the JSON-string or Object into control.command as {instance: 'AABBCCDD', command: 'cmd', data: 'ddd'}. In this case the instance and data will be taken from JSON object.

With command in javascript adapter you can activate text to speech engine of Android:

setState('vis.0.control.command', '{"instance": "*", "data":"say something", "command": "tts"}');

TODO

• enable automatically load of project files from ioBroker server (e.g. for home use)

Changelog

2.0.0 (2020-03-28)

• (bluefox) BREAKING CHANGES: works only with web >= 3.0
• (bluefox) versions of adapters were updated

1.2.2 (2019-05-05)

• versions of adapters were updated

1.0.5 (2017-09-26)

• (nobody) fix scale factor
• (bluefox) update weather widgets

1.0.4 (2017-08-07)

• (bluefox) add weather widgets

1.0.1 (2017-07-21)

• (bluefox) remove opacity from the settings dialog for performance
• (bluefox) fix settings for zoom
• (bluefox) add "no-cache" mode
• (bluefox) patch proxy.0 links
• (bluefox) update all packets (e.g. swipe)

0.8.3 (2017-02-07)

• (bluefox) add private policy

0.8.2 (2016-12-25)

• (bluefox) add hue widgets

0.7.0 (2016-09-09)

• (bluefox) add geolocation
• (bluefox) add report of battery status

0.6.0 (2016-09-01)

• (bluefox) new cordova module version 6.3.1
• (bluefox) add dwd, kodi widgets
• (bluefox) update vis, justgauge, bars

0.5.2 (2016-07-29)

• (nobody) exit app by back button
• (nobody) very much documentation
• (bluefox) update license file
• (bluefox) translate description to Russian

0.5.1 (2016-07-23)

• (nobody) add flot to local files
• (nobody) fix error with settings
• (bluefox) add rickshaw to local files

0.5.0 (2016-07-23)

• (bluefox) replace fonts links too
• (bluefox) create description
• (bluefox) allow multiple SSIDs
• (bluefox) reset zoom if settings opened
• (bluefox) limit minimal zoom to 20%
• (bluefox) replace paths in vis-user.css too
• (bluefox) resize settings button according to scale

0.4.5 (2016-07-21)

• (bluefox) support of multiple SSIDs divided by comma

0.4.4 (2016-07-18)

• (bluefox) fix string escaped

0.4.3 (2016-07-17)

• (nobody) fix progressbar, regEx, img path sub in oid

0.4.2 (2016-07-16)

• (bluefox) add text input to zoom values in settings

0.4.1 (2016-07-12)

• (nobody) add crosswalk browser

0.3.2 (2016-06-21)

• (bluefox) replace src="/vis/..." too

0.3.1 (2016-06-21)

• (bluefox) fix common.css
• (bluefox) try up to 10 times to store the file if got error

0.3.0 (2016-06-13)

• (bluefox) update cordova lib
• (bluefox) add vis-history
• (bluefox) use latest vis

0.2.1 (2016-05-17)

• (bluefox) add justgauge

0.2.0 (2016-05-10)

• (bluefox) make it run on 4.0.x and 4.1.x

0.1.2 (2016-05-03)

• (bluefox) fix error with SVG files
• (bluefox) try to fix error with start

0.1.1 (2015-04-24)

• (bluefox) try to fix file saving

0.1.0 (2015-04-20)

• (bluefox) fix TTS
• (bluefox) allow pictures from other projects
• (blufeox) change storage to external
• (bluefox) change settings dialog
• (bluefox) allow set system volume for speech

0.0.8 (2015-02-23)

• (bluefox) fix "hide on condition"
• (bluefox) implement sleep in background (if app is not active, do not communicate and do not recognize speech)

0.0.7 (2015-01-18)

• (bluefox) text2speech

License

Copyright (c) 2016-2019 bluefox https://github.com/GermanBluefox Creative Common Attribution-NonCommercial (CC BY-NC)

http://creativecommons.org/licenses/by-nc/4.0/

It is prohibited to publish this app or modifications of this app in any kind of mobile application stores (Google App Store, Amazon App Store, ...) or make possible to download the app from some online resources (forums, web sites, ...). Even if the name of the app is modified and it is free of charge you may not publish it or let others to use it.

Short content: Licensees may copy, distribute, display and perform the work and make derivative works based on it only if they give the author or licensor the credits in the manner specified by these. Licensees may copy, distribute, display, and perform the work and make derivative works based on it only for personal purposes. (Free for personal use).

iobroker.vis.cordova's Issues

Daswetter icons werden nicht angezeigt

Es werden die Icons von daswetter im Browser angezeigt, aber leider nicht in der Android App. Im forum gibt's darüber auch schon einige Berichte.

Lollipop has a bug where SD cards are null.

I'm using the latest LocalFileSystem.java and I'm getting null in for the data stored in SD card.How to overcome this.I tried using context.getExternalCacheDirs but still I'm getting the same error.Please help me.

Schalter aktualiesieren sich nicht mehr,erst nach neustart

Früher war es so das wenn ein schalter zb durch Alexa geschaltet wurde sich das in der android app sofort visuell geändert hat. Seit längerem ist es so ,das ich die app erst neu starten muss um den aktuellen status in der android app zu sehen.
Oder noch ein beispiel ich konnte ein Fenster öffnen und schließen während ich die app geöffnet habe, dann habe ich auch live in der app gesehen wie sich der Status verändert hat, das ist seid ein paar wochen aber nicht mehr so. Ist ein Status Wechsel aufgetreten muss die app erst neu gestartet werden um die Veränderung zu zeigen.

Mihome vaccum widget not fully working

The main button to start/pause the vacuum is not working in the app. Instead of triggering the action it updates the "state" to "true" (which of course doesn't do anything meaningful).

I tried to debug it myself in the mihome widget but as I can't get a new html into the app for testing I have to open an issue here.

Here is what I have seen so far:
The widget has this onClick funktion:

       onclick: function (el, isRunning) {
            var oid = $(el).data('oid');
            if (oid) {
                var val = $(el).data('value');
                if (val) {
                    vis.setValue(oid, parseInt(val));
                } else {
                    if ($(el).data('type') === 'state') {
                        if (isRunning) {
                            vis.setValue($(el).data('pause'), true);
                        } else {
                            vis.setValue($(el).data('start'), true);
                        }
                    } else {
                        if ($(el).data('type') === 'home' && isRunning) {
                            // pause first to send back to the dock;
                            vis.setValue($(el).data('pause'), true);
                        }
                        vis.setValue(oid, true);
                    }
                }
            }
        }

The button that has the issue has the HTML attribute data-type='state' and no data-value attribute.
That should mean that the onClick function should go into the else branch of if(val) because there is no data-value and after that into the true part of the 'state' check.
But instead it eather executes vis.setValue(oid, parseInt(val)); or vis.setValue(oid, true); but it's unclear to me how this could happen (if the app uses the most up-todate version of the widget).

What also ist wrong (perhaps related) is that the app always shows the button blue highlighted which means that the widget assumes the vaccuum is running even if it doesn't. So there also seems to be an issue with the "isRunning()" function.

Both these issues only happen in the app, in a browser all works as expected.

iOS App: (auto-)remove error message

I would like to suggest following change on ioBroker VIS iOS app:

If connection is lost to server due to ioBroker restart there are shown 2 error messages. One seems to be web content and the other seems to be an iOS popup window.

When the connection is established again, VIS gets fully new loaded and one error message has gone, but the other message stays in place until you push OK.

Please consider to auto-remove the iOS popup message or, if not possible, remove this message completely.
Thanx in advance

jqui widgets font-size funktioniert nicht (mehr)

Die font css Atribute (size, weigth etc) funktionieren für die Eingabefelder der jqui-widgets nicht.
In der Vorgängerversion der App waren diese richtig. Ebenso in früheren VIS Versionen im Browser.

Wenn ich die "alte" App Version (mit Appcloner erstellt) auf neue VIS-Views mit jqui- Widgets verwende ist alles richtig dargestellt. Mit der aktuellen App bzw. im Browser stimmen die font-sizes nicht.

siehe auch: https://forum.iobroker.net/topic/27091

Metro: Nav löst auch auf Folgeseite Tastendruck aus

Hi!

Wie auch hier beschrieben:
https://forum.iobroker.net/viewtopic.php?f=30&t=1257&start=40

löst die app eine Aktion auf der Folgeseite aus nachdem die Seite bereits bei der App im Cache ist.
in vis (BRowser) ist das Problem anscheinend behoben.

In der App noch nicht sodaß sie gerade bei "vollen" Handy-Views quasi nutzlos ist.

der Punkt wurde auch schonmal hier behandelt ioBroker/ioBroker.vis#104, ist aber in der App nicht gefixed.

Ein Feedback wäre nett...

bis denne
Mr.Lee

Erweiterung für WearOs

Wäre eine Erweiterung für Android Uhren mit WearOs möglich, so das man eine View auf der Uhr anzeigen könnte

some pictures are broken

Hi, all my SVG, PNG and WebCam pictures are broken and vis shows only empty placeholders. The pictures are not corrupt or damaged, because I have no problems with Apple ioBroker.vis app, MAC Safari or Firefox on Linux and Windows.

1. SVG pictures cannot read: test with weather forecast from yr.no V 2.0.3 (workaround, but this cannot be a solution?)
2. PNG pictures cannot read: test with some pictures from my folder /vis.0/abfall/
3. JPG WebCam pictures cannot read: test with INSTAR WebCam via Basic Authentication by user:passw@url (same trouble with **chrome browser), e.g.: guest:[email protected]/tmpfs/snap.jpg

my system:

• Raspberry Pi4 (4GB) Linux 4.19.75-v7l+ armv7l
• ioBroker 3.6.12 with Node.js v10.18.0
• Tablet with Android Version 9 (Kernel 4.9.112) tested with ioBroker.vis app Version 1.1.1 and 1.2.4 (beta)
• all pictures: owner and group is iobroker with chmod 644

** Unfortunately this problem is known, but google doesn't do anything. Is this app based on chrome? As Basic Authentication I use a guest user and not an user with admin rights.

1.1.3 Problem

Bei meinem VIS wird das CSS anscheinend nicht richtig geladen.
Das Problem habe ich aber nur auf meinen 2 Tablets.
Einer auf Android 9 mit der latest Beta Vis App
der andere mit 4.4 und 1.0.3

Gibt es eine Möglichkeit logs zu bekommen aus der app?

Ich habe schon alles probiert aber finde keinen Fehler.

https://forum.iobroker.net/viewtopic.php?f=30&t=19397&p=204545#p204545

Keine Verbindung bei Webserver 4.0

Der App verbindet bekanntlich nicht beim neuen Webserver. Eine angepasste Version wäre toll

After update to 2.0.2 All "normal" text is not black but white

All text with no color in the vis editor is normally black if one uses webbrowser.
In the app the color is white. If i change the text color to black it works, exept for the input field.
There i do have white background with white textcolor.

location not working

On Android 8.1.0 the location service is not running properly.
With the app minimized no location data will be send.
If the app is opened the interval set to send data is ignored.
On high accuracy the update interval will be about 1 sec and with high accuracy disabled the interval is about 10 sec, regardless of the value.

Login with Authentication not possible

A login with username and password is not possible via Android App (SSL and Non-SSL).
Tried via Web-Adapter and intergrated Socket.io and seperate Socket.io.

ioBroker Error Log Message:
error: web.0 socket.io unknown user
(the user exists with a simple and short password)

In-App Message: "Alert - Username oder Kennwort flash" (<< small typo, should be called "falsch" in german)

The speech recognition is only working one time

Speech recognition does not work any more after the first recognized command.

Connected nicht mehr

http://forum.iobroker.net/viewtopic.php?f=30&t=1928&p=90070#p90060

location not working on IOS

app version 1.0.26
on IPad Pro
with IOS 14.8.1

ios permissions set:

Zugriff auf Standort erlauben:
Beim verwenden der App

Genauer Standort: enabled

if i set the permissions to: Nächstes Mal fragen:
with start of the app it asks for permission.

but in all cases, no datapoints on iobroker server was set.

... and better is to change to
https://github.com/mauron85/cordova-plugin-background-geolocation
to provide gps information as a background service without to have the app opened allways.

Trash Scheduler wird nicht angezeigt

Nachdem ich von dem Entwickler des Trash Scheduler Adapter den Hinweis bekommen habe, das es nicht an seinem Adapter liegen kann, hier der Hinweis, das das Trash Scheduler Adapter Widget nicht unter Android angezeigt wird.

Weiter Bilder und Erklärungen sind bereits hier zu finden -> klein0r/ioBroker.trashschedule#19

Android APP aktualisiert sich nicht mehr

Die Andriod App 2.0.3 findet bei einem ReSync nicht mehr die vis-view.json

Es wird der Ladebalken fast bis zum Ende geladen und in dieser Position bleibt er dann hängen und aufgrund des drehenden Kreises im Hintergrund scheint dabei die Verbindung zum ioBroker Server unterbrochen zu werden. Dies passiert aber erst nach "gefühlt" 5 Minuten in dem Zustand wo der Ladebalken ganz am Ende steht.

Man kann das Projekt trotz korrekter Einstellungen nicht mehr aufrufen - es wird immer versucht zu aktualisieren oder zu resynchronisieren, was aber jedes mal fehlschlägt. Im Moment kann ich die App nicht mehr nutzen. Unter iOS läuft alles normal.

Fehlermeldungen im Admin (4.1.10) LOG gibt es auch keine.

Webserver ist 3.0.14. Welche Adapter Infos braucht ggf. ihr noch?

not able to build app

I'm not able to build the app anymore. I pulled latest version into my local repository, cleaned up my working directory and startet with "npm install". I had to do it many times until all modules were available.
I had some trouble with "com.pylonproducts.wifiwizard" in dependencies of package.json. Finally I just removed that there. I'm not sure was it a good idea?
For some reasons I had to install grunt and a couple of grunt-xxx packages manually. After that I was able to call "grunt build". Now I get

Using this version of Cordova with older version of cordova-android is deprecated. Upgrade to
[email protected] or newer.
Error: Your android platform does not have Api.js

Exited with code: 1.`

The strange thing is I have cordova V7.0.1 and cordova-android V6.3.0. But this seems not so important. More important is the missing js-file.

I guess api.js was removed in a earlier commit here?

Rebuild with vis 1.2.12

Due to the bindings issue in previous version

Bring Widget not supported

Hello,
I am using the bring V1.7.3 Adapter and it works great and the widget works perfekt on browser, but is not displayed in the vis Android App. Is this a known bug?
I am talking about this Widget:

Thanks for help!

Flot not working with socket.io 2.1.0

With socket.io 2.1.0 vis app does not show flot diagram. On chrome browser is all ok.

iobroker.app android - keine Verbindung mit ws

https://forum.iobroker.net/topic/56353/iobroker-app-android-keine-verbindung-mit-ws

Habe auf dem Android Handy dis vis app.
Hat immer geklappt.

Nun hab ich mal ws Instanz installiert und im web ws angegeben.

Dann bekommt die vis app keine Verbindung mehr und lädt folglich nicht mehr.

Wenn ich ws instanz abschalte und in web auf integriert gehe, dann klappt wieder alles.

@Homoran
@apollon77

Bitte mal prüfen; dieser Fehler ist bei mir reproduzierbar und nachstellbar.
Sobald ich ws ausschalte geht die app wieder.

Bitte den bug bereinigen.
Danke.
DieterHabe auf dem Android Handy dis vis app.
Hat immer geklappt.

Nun hab ich mal ws Instanz installiert und im web ws angegeben.

Dann bekommt die vis app keine Verbindung mehr und lädt folglich nicht mehr.

Wenn ich ws instanz abschalte und in web auf integriert gehe, dann klappt wieder alles.

@Homoran
@apollon77

Bitte mal prüfen; dieser Fehler ist bei mir reproduzierbar und nachstellbar.
Sobald ich ws ausschalte geht die app wieder.

Bitte den bug bereinigen.
Danke.
Dieter

Material Design widgets

Can you please implement the Material Design Widgets Into the Android App?
the Material Design Widgets are Not Usable at this moment on Android.
Using App V 2.20
Thanks

iOS App: control brightness of screen over ioBroker

iPads have automatic brightness regulation for the screen, but this doesn't work for my needs.
Please grant us the ability to control the brightness over ioBroker states like you did with user activity, but manually controlled.

Thanx in advance

akku und Kamera

Info:
zur Info:
1)
Akku aktualisiert nicht nach resync, Neustart des Tablet behebt das Problem bis zum nächtsen resync
2)
nach ausführlichen Test's, Tablet mit Andriod im heimischen Netzwerk:
Kamera-jpg und -streams werden in der App nicht angezeigt
alle in Frage kommenden widgets sowohl mit jpg als auch mit mjpg getestet in verschiedensten Einstellungen
im Browser auf gleichem Gerät (hier Firefox ) funktionieren die widgets problemlos, sowohl Anzeige als auch Aktualisierung

Cant show new Vis.Material design

Hi,

i want to design my Vis wit the new materialdesign.widgets.
When i open my Vis in a Browser (Chrome) i can see my vis with embeded materialdesign widgets.
but when its opened by Vis.app the materialdesign widgets are not visible!?

whats wrong or is there someting missing in the code?

Thanks for help

Dome

keine Icons in yr.no-Adapter seit umstellung auf Version 2.01

yr.no Adapter v2.0.1
iobroker app 1.2.0

Wettericons werden nicht dargestellt da der Adapter (Datenpunkt html) nun auf die Icons im Adapter-Verzeichnis verweist, diese werden mit der app nicht synchronisiert.

Mr.Lee

Time-Switch Widget von walli545

Wird in der IObroker Vis App nicht angezeigt. Android