gstreamer-1.18.4-rpi_64-bits's Introduction

GStreamer-1.18.4-RPi_64-bits

GStreamer + OpenCV on a Raspberry Pi 4

An working example of the GStreame 1.18.4.
It works on a Raspberry Pi with an 64-bits OS.
If you want to use the new 32-bits rpicamsrc see https://github.com/Qengineering/GStreamer-1.18.4-RPi_32-bits

Dependencies.

To run the application, you have to:

A Raspberry Pi 4.
GStreamer 1.18.4 installed. Install GStreamer
OpenCV 64 bit installed. Install OpenCV 4.5
Code::Blocks installed. ($ sudo apt-get install codeblocks)
A working Raspicam or Webcam

Installing the app.

To extract and run the app in Code::Blocks
$ mkdir MyDir
$ cd MyDir
$ wget https://github.com/Qengineering/GStreamer-1.18.4-RPi_64-bits/archive/refs/heads/main.zip
$ unzip -j master.zip
Remove master.zip, LICENSE and README.md as they are no longer needed.
$ rm master.zip
$ rm LICENSE
$ rm README.md

Your MyDir folder must now look like this:
GStreamerTest64.cpb
main.cpp

Running the app.

To run the application load the project file GStreamerTest64.cbp in Code::Blocks.
Next, follow the instructions at Hands-On.
On this page you can see how to make the webcam work.

Frame rate.

The Raspicam supports many sizes and frame rates, as you can see here.
You can switch between the different options by altering the parameters in the pipeline.
As long it's a valid combination, it will work. For instance:

    //pipeline parameters
    int capture_width = 640 ;
    int capture_height = 480 ;
    int display_width = 640 ;
    int display_height = 480 ;
    int framerate = 90 ;