herwonowr / catchme

CatchME - WiFi Fun Box "Having Fun with ESP8266"

CatchME

WiFi Fun Box

Contents

• Introduction
• Features
• Installing and Updating Options
  • Using NodeMCU Flasher
  • Using Arduino IDE
  • Using CatchME UI
• Documentation
• Issues
• Contributing
• Code of Conduct
• License and Credits

CatchME Introduction

CatchME is developed by (Herwono W. Wijaya) @HerwonoWr, this project based upon the awesome work of (Stefan Kremser) @spacehuhn, (Sam Denty) @samdenty99, and other contributors. This project is a proof of concept for testing and educational purposes.

CatchME allows you to perform deauth attack, beacon, probe request flooding, and WiFi sniffing. CatchME (deauth attack) works by exploiting an old and known (deauth attack) vulnerability in the 802.11 WiFi protocol. CatchME also allows you to detect Deauth Attack.

CatchME has two operation mode, Attack Mode and Detector Mode, Detector Mode allows you to detect Deauth Attack.

WARNING

Use it only against your own networks and devices!. I don't take any responsibility for what you do with CatchME.

Please check the legal regulations in your country before using it. Do not redistribute, advertise or sell of this software as "jammer"!.

Features

• Fully web based UI management
• WiFi client mode - access CatchME on the WiFi network
• Deauth attack, beacon, probe request flooding, and WiFi sniffing
• Attack mode and detector mode for deauth attack
• ESP8266 system info
• Double reset press button - factory default configurations
• Flash button - attack mode
• OTA update

Installing and Updating

In order to install the firmware, you can use one of the following installation methods. Using NodeMCU Flasher or Arduino IDE, and for updating the firmware, you can use either NodeMCU Flasher, Arduino IDE, and CatchME UI. The NodeMCU Flasher method is easier overall but using Arduino IDE is better for debugging.

For the first time firmware installation, use NodeMCU Flasher or Arduino IDE. CatchME UI method is only can be use for updating the firmware.

YOU ONLY NEED TO DO ONE OF THE INSTALLATION METHODS!

Requirements

• ESP8266 Module
• ESP8266 Core library, must be version 2.0.0!
• ESP8266 Patch library
• ESP8266 Driver

  • Windows Users

    CP210x	CH34x
    Download	Download

  • MacOS Users

    For the MacOS you can install driver using brew

    brew tap caskroom/drivers
    brew cask install silicon-labs-vcp-driver
    

ESP8266 board variants:

CP210x	CH34x

Using NodeMCU Flasher

1. Download NodeMCU Flasher
2. Download the current firmware release (binary version)
3. Upload the firmware .bin file using NodeMCU Flasher
4. Connect your ESP8266 (making sure the correct drivers are installed) and open up the NodeMCU Flasher
5. Go to the Advanced tab and select the correct values for your board
6. Navigate to the config tab and click the gear icon for the first entry
7. Browse for the .bin file you just downloaded and click open
8. Switch back to the Operation tab and click Flash(F)

Note: This guide is for Windows users

Using Arduino IDE

1. Download and install Arduino IDE

2. Download the current firmware release (source version)

3. MacOS Users

   • Go to Arduino > Preferences
   • Add http://arduino.esp8266.com/stable/package_esp8266com_index.json to the Additional Boards Manager URLs

4. Windows Users

   • Go to File > Preferences
   • Add http://arduino.esp8266.com/stable/package_esp8266com_index.json to the Additional Boards Manager URLs

5. Go to Tools > Board > Boards Manager

6. Type in esp8266

7. Select version 2.0.0 and click on Install (must be version 2.0.0!)

8. Patching ESP8266 v2.0.0 Core

   • Check your ESP8266 packages location
     • MacOS Users

       • Go to Arduino > Preferences

         Find your packages path location under text More preferences can be edited directly in the file

     • Windows Users

       • Go to File > Preferences

         Find your packages path location under text More preferences can be edited directly in the file

9. Copy patch files in the esp8266-Patch folder to the following locations

   Patch File	Path Location	Folder
   user_interface.h	[packages-location]/packages/esp8266/hardware/esp8266/2.0.0/tools/sdk/include	include
   ESP8266WiFi.cpp ESP8266WiFi.h	[packages-location]/packages/esp8266/hardware/esp8266/2.0.0/libraries/ESP8266WiFi/src	src
   ESP8266HTTPUpdateServer.cpp	[packages-location]/packages/esp8266/hardware/esp8266/2.0.0/libraries/ESP8266HTTPUpdateServer/src	src

10. Go to CatchME folder, and open CatchME.ino file in Arduino IDE

11. Select your ESP8266 board module (this guide using NodeMCU 1.0 (ESP12-E Module)) and the right port

    • Go to Tools > Board, select the right board module
    • Go to Tools > Port, select the right port

12. Depending on your ESP8266 board, you may have to adjust the board configurations

    • Here is an example board configuration for NodeMCU 1.0 (ESP12-E Module)

      Conf	Value
      CPU Frequency	80Mhz
      Flash Size	4M (3M SPIFFS)
      Upload Speed	115200

13. Click Upload

Note: This guide is for MacOS and Windows users

Using CatchME UI

CatchME UI method only for updating the firmware, this method can't be use for first time installation.

1. Download the current firmware release (binary version)
2. Connect to your CatchME network
3. Open CatchME UI IP address from your browser
4. Go to SYSTEM INFO menu, and click SELECT FIRMWARE FILE .BIN
5. Browse for the .bin file you just downloaded and click open
6. Click UPDATE

Documentation

• Getting started with CatchME
• FAQ

Issues

If you encounter an issue, you are welcome to submit it here.

Please provide as much context as possible:

• ESP8266 Arduino core version which you are using.
• Your sketch code; please wrap it into a code block, see Github markdown manual.
• For issues which happen at compile time, enable verbose compiler output in the IDE preferences, and attach that output (also inside a code block).
• ESP8266 development board model.
• IDE settings (board choich, flash size).

Contributing

Please check Contributing Guidelines to understand some basic conventions for contributing to this project.

General

Please make sure there are no existing pull requests to address the mentioned new features or issues. And, please check for issues related to the update, as someone else may be working on the issue.

Code of Conduct

Please check CODE OF CONDUCT to understand CatchME contributor covenant Code of Conduct.

License and Credits

CatchME is developed and maintained by (Herwono W. Wijaya) @HerwonoWr. This project is licensed under MIT License.

ESP8266 deauther and DeauthDetector written by (Stefan Kremser) is used in this project. It is distributed under MIT license.

Wi-PWN written by (Sam Denty) is used in this project. It is distributed under CC BY-NC 4.0.

Credits

Thanks for the awesome works:

• (Stefan Kremser) @spacehuhn
• (Sam Denty) @samdenty99
• (Aur élien Hernandez) @N0vaPixel
• (SaltyViper) @SaltyViper
• (Tobozo) @tobozo
• (Larz Jacobs) @LarzJ
• (Stimons) @StijnSimons
• (Andrbmgi) @andrbmgi
• (Samuel KS) @SamuelKlit
• (Helmut) @schinfo
• (Erick Belluci Tedeschi) @ericktedeschi
• (Antonio Navarro Perez) @ajnavarro

Thanks to

• (MAC Address List) - Wireshark manufacturer database
• (Wave.js) - Click effect inspired by Google's Material Design
• (Material Design Icons) - Icons assets

catchme's Issues

Web url issue

Please remove .html in bottom tab sir @herwonowr thanks

Not work

Eror 404

Deauth detector led issue

Led is blinking in standby mode...i hope you can change it to blinking only if the nearby network is being attack...