hayate891 / simit-armt

ARM Simulator, mirrored from http://sourceforge.net/projects/simit-arm/ with a few modifications

SimIt-ARM

About

SimIt-ARM 3.0 currently contains a functional simulator for the ARM v5 architecture. It supports both user-level simulation and system-level simulation.

Installation

To install, clone git repository

git clone https://github.com/medvid/simit-arm.git
cd simit-arm

Then, create build directory and run CMake from here:

mkdir -p build && cd build
cmake ..
make
make install

CMake supports following configuration options:

• ENABLE_DEVEL - enable development features
• ENABLE_DECGEN - build decoder generator
• ENABLE_ISSGEN - build instruction set generator
• ENABLE_JIT - enable dynamic-compiled simulation engine

The <prefix>/bin directory will contain 1 file:

• ema - ARM instruction set simulator

Usage

You can test the simulator by doing the following:

cd test
<prefix>/bin/ema wc ../README.md

wc is the UNIX utility word count. The above command interprets the cross-compiled wc program to count the words in this file. You can also test system-level simulation by doing the following:

<prefix>/bin/ema -s sa1100.cfg

The above program will boot the vmlinux image, a Linux 2.4.19 kernel configured for the SA1100 processor. The configuration file sa1100.cfg specifies some architecture information of the system to simulate. The file and the related binary images can be downloaded from Simit-ARM website.

Development

TODO

Short-term list:

• ARMv5 (LDC2, STC2, MCR2, MRC2, CDP2, BKPT, PLD), Thumb, XSCALE extensions
• LCD, Touch-screen, NIC, Flash, ...
• GDB remote debugger interface
• Support for 64-bit host platforms.

Long-term list:

• Class restructuring for better OOP?
• Cycle accurate simulator from arm.isa?
• Direct translation (like QEMU) based on arm.isa?

Changelog

armsim-0.1 07-02-2002, initial release.

armsim-0.2 07-15-2002, improved release, 50% faster than 0.1.

Major changes:

• Bug fixed on swap,swapbyte (when src and dst reg be the same)
• Exploit instruction memory accessing locality to save pc page table lookups.
• Exploit data access locality (pc based, stack pointer based) to save page table lookup.
• Use table lookup to replace switch/case in predicate testing.
• Specializes some memory access operation implementations to save execution time.
• Bug fixed on carry bit updating of adc, sbc and rsc.

SimIt-ARM-1.0b 10-6-2002, a major release including a cycle-accurate simulator.

• Enhanced portability. Installation tested on x86-linux, sun-solaris, alpha and Cygwin.
• Added mmap system call interpretation, shortens program execution trace.

SimIt-ARM-1.0 4-6-2003, minor chages from 1.0b.

• Used automatic synthesized decoder, correctness now ensured.
• Added argument "-m" so that user can control the length of simulation.
• Small fix on fstat64 system call interpretation for Linux compatibility.
• Small fix on cache.h to suppress g++3.2 complaints.

SimIt-ARM-1.1a 4-29-2003, alpha release of modularized emulator and simulator.

• Bug fixes on shifter operand of dpi operations.
• Emulator source code becomes CPP code, 5-10% slow down for emulator.
• The emulator and simulator are modularized, i.e. multiple instances can be created without interfering each other. Very useful for multi-processor platform simulation.
• Emulator and simulator now can be reused, i.e. they can load a program
• and run, then dump the program and reload another to run.

SimIt-ARM-1.1b 7-10-2003, bug fix release

• Bug fixes on half-word/signed byte load/store.
• Bug fix on mla_s's erroneous zero flag setting.
• Bug fixes in ema_count: forgot to count fpe and syscall.
• Buf fixes in syscall.cpp:read/write, size_t --> ssize_t.
• Bug fixes in emumem.cpp:get_page, C++ array constructor does not do initialization, nor type checking on initializer.
• Inlined some memory functions to boost ISS speed by about 10%.

SimIt-ARM-1.1 9-1-2003, release

• Various small bug fixes with the help of Valgrind.

SimIt-ARM-2.0 1-8-2004, release

• The cycle accurate simulator is mostly synthesized from MADL.
• Cycle accurate simulator is 2x faster than the one in 1.x release.
• Many bugs in release 1.x fixed, improved timing accuracy.
• Flexible stub provided for external device models. To learn how to use the stubs, see file dev_test.hpp.
• Simplified configuration.

SimIt-ARM-2.0.1 2-10-2004, bug fix release

• Store_ext_reg instruction's address computation is fixed.
• Load_ext_imm instruction's sign extension is fixed.
• One less cycle for coprocessor instruction execution.

SimIt-ARM-2.0.2 5-17-2004, bug fix release with improvements

• Smull and umull encoding fixed.
• Fix building out-of-source problem. (Thanks to Artur Klauser)
• Speed up of emulator by hacking PC and CPSR. (Thanks to Artur Klauser)
• Included decgen for user to add new instructions.
• MMAP based speedup. (Thanks to Artur Klauser)

SimIt-ARM-2.0.3 9-15-2004, cache model fix

• Fixed some problems in data cache, adjusted cache parameters, improves accuracy.

SimIt-ARM-2.0.4 12-9-2004, C++ syntax fix

• Fixed some problems exposed by gcc3.4.
• Chris Han contributed to implement some system call routines.

SimIt-ARM-2.1 2-2-2005, Bug fix, portability fix, added singleton

• Fixed sima's bug in sign-extending for some load instructions.
• Added emu_single directory, generates an non-modularized emulator, about 5-6% faster than emu.
• Fixed one portability problem in libosm, _S and _L are used as macros in c library. Never use these names
• Fixed one portability problem in decgen/decode.h. label_t is used somewhere in the library. Change that to dg_label_t.

SimIt-ARM-2.1.1 5-21-2005, cleanup not really to be released

• Removed emu_single, reverted related changes in version 2.1. Too complicated and not worthwhile the slight performance gain.
• Improved memory emulator, added access permission control.
• Remved the original external memory interface since the new memory emulator has integrated similar function in a better way.
• Fixed some bugs in libosm/mpz_base.?pp. The bugs were irrelevant to SimIt-ARM since this part of the library was not used in SimIt.

SimIt-ARM-3.0 6-25-2007, supports system-level simulation

• Supports system level simulation.
• Supports compiled simulation (ema_jit).
• Improved the interface of the builtin debugger.

Authors

• Wei Qin ([email protected])
• Joseph D'Errico ([email protected])
• Apisate Thammanomai ([email protected])

Contributors

• Artur Klauser improved the memory emulator in release 2.0.2.
• John Beniston and Stephen Li reported several emulator bugs.

Acknowledgements

• SimIt-ARM uses the elf loader and the system call interpreter from Microlib.org by Gilles Mouchard.
• SimIt-ARM borrows some system-level emulation code from Skyeye/Armulator.
• SimIt-ARM uses some ideas from QEMU to improve performance.