harisokanovic / vpnc Goto Github PK
View Code? Open in Web Editor NEWVpnc forked from http://svn.unix-ag.uni-kl.de/vpnc/
License: Other
Vpnc forked from http://svn.unix-ag.uni-kl.de/vpnc/
License: Other
A VPN client compatible with Cisco's EasyVPN equipment. Supports IPSec (ESP) with Mode Configuration and Xauth. Supports only shared-secret IPSec authentication with Xauth, AES (256, 192, 128), 3DES, 1DES, MD5, SHA1, DH1/2/5 and IP tunneling. It runs entirely in userspace. Only "Universal TUN/TAP device driver support" is needed in kernel. Project home page: http://www.unix-ag.uni-kl.de/~massar/vpnc/ ========= Contents of this file ============================================ - General configuration of vpnc - Using a modified script - Additional steps to configure hybrid authentication - Setting up vpnc on Vista 64bit - Known problems ========= General configuration of vpnc ==================================== Required Libraries: libgcrypt (version 1.1.90 for 0.2-rm+zomb-pre7 or later) libopenssl (optional, to provide hybrid support) It reads configuration data from the following places: - From command-line options - From config file(s) specified on the command line - From /etc/vpnc/default.conf only if no configfile was given on the command line - From /etc/vpnc.conf same as default.conf, ie: both are used, or none - If a setting is not given in any of those places, it prompts the user. The configuration information it currently needs is: Option Config file item --gateway IPSec gateway --id IPSec ID (no option) IPSec secret --username Xauth username (no option) Xauth password A sample configuration file is: # This is a sample configuration file. IPSec gateway 127.0.0.1 IPSec ID laughing-vpn IPSec secret hahaha Xauth username geoffk Note that all strings start exactly one space after the keyword string, and run to the end of the line. This lets you put any kind of weird character (except CR, LF and NUL) in your strings, but it does mean you can't add comments after a string, or spaces before them. It may be easier to use the --print-config option to generate the config file, and then delete any lines (like a password) that you want to be prompted for. If you don't know the Group ID and Secret string, ask your administrator. If (s)he declines and refers to the configuration files provided for the vpnclient program, tell him/her that the contents of that files is (though scrambled) not really protected. If you have a working configuration file (.pcf file) for the Cisco client then you can use the pcf2vpnc utility instead, which will extract most/all of the required information and convert it into a vpnc configuration file. ========= Using a modified script ========================================== Please note that vpnc itself does NOT setup routing. You need to do this yourself, or use --script "Script" in the config file. The default script is /etc/vpnc/vpnc-script which sets a default route to the remote network, or if the Concentrator provided split-network settings, these are used to setup routes. This option is passed to system(), so you can use any shell-specials you like. This script gets called three times: $reason == pre-init: this is before vpnc opens the tun device so you can do what is necessary to ensure that it is available. Note that none of the variables mentioned below is available $reason == connect: this is what used to be "Config Script". The connection is established, but vpnc will not begin forwarding packets until the script finishes. $reason == disconnect: This is called just after vpnc received a signal. Note that vpnc will not forward packets anymore while the script is running or thereafter. Information is passed from vpnc via environment variables: #* reason -- why this script was called, one of: pre-init connect disconnect #* VPNGATEWAY -- vpn gateway address (always present) #* TUNDEV -- tunnel device (always present) #* INTERNAL_IP4_ADDRESS -- address (always present) #* INTERNAL_IP4_NETMASK -- netmask (often unset) #* INTERNAL_IP4_DNS -- list of dns servers #* INTERNAL_IP4_NBNS -- list of wins servers #* CISCO_DEF_DOMAIN -- default domain name #* CISCO_BANNER -- banner from server #* CISCO_SPLIT_INC -- number of networks in split-network-list #* CISCO_SPLIT_INC_%d_ADDR -- network address #* CISCO_SPLIT_INC_%d_MASK -- subnet mask (for example: 255.255.255.0) #* CISCO_SPLIT_INC_%d_MASKLEN -- subnet masklen (for example: 24) #* CISCO_SPLIT_INC_%d_PROTOCOL -- protocol (often just 0) #* CISCO_SPLIT_INC_%d_SPORT -- source port (often just 0) #* CISCO_SPLIT_INC_%d_DPORT -- destination port (often just 0) Currently vpnc-script is not directly configurable from configfiles. However, a workaround is to use a "wrapper-script" like this, to disable /etc/resolv.conf rewriting and setup a custom split-routing: ------------------------------ #!/bin/sh # this effectively disables changes to /etc/resolv.conf INTERNAL_IP4_DNS= # This sets up split networking regardless # of the concentrators specifications. # You can add as many routes as you want, # but you must set the counter $CISCO_SPLIT_INC # accordingly CISCO_SPLIT_INC=1 CISCO_SPLIT_INC_0_ADDR=131.246.89.7 CISCO_SPLIT_INC_0_MASK=255.255.255.255 CISCO_SPLIT_INC_0_MASKLEN=32 CISCO_SPLIT_INC_0_PROTOCOL=0 CISCO_SPLIT_INC_0_SPORT=0 CISCO_SPLIT_INC_0_DPORT=0 . /etc/vpnc/vpnc-script ------------------------------ Store this example script, for example in /etc/vpnc/custom-script, do a "chmod +x /etc/vpnc/custom-script" and add "Script /etc/vpnc/custom-script" to your configuration. ========= Additional steps to configure hybrid authentication ============== To use the hybrid extension add Use Hybrid Auth to your .conf file or add --hybrid when starting vpnc. The trusted root certificate may be passed by adding CA-File <root_certificate.pem> to your .conf file or adding --ca-file <root_certificate.pem> when starting vpnc. The trusted root certificate may be contained in a directory by adding CA-Dir <trusted_certificate_directory> to your .conf file or adding --ca-dir <trusted_certificate_directory> when starting vpnc. The default is /etc/ssl As the trusted certificate is referenced by the hash of the subject name, the directory has to contain the certificate named like this hash_value. A link can also be used like in /etc/ssl/certs/. The hash value can be calculated by e.g. openssl x509 -in <ca_certfile.pem> -noout -hash ========= Setting up vpnc on Vista 64bit =================================== 1. Install cygwin onto vista. Details here: http://www.cygwin.com/ 2. Make sure you install the development options for cygwin to give you access to make and gcc etc 3. Make sure you install libgcrypt for cygwin as it is needed in the make 4. Modify the bash.exe to run as administrator or you will have privilege issues later, this is done on the properties tab of the executable in c:/cygwin/bin 4. Download the latest vpnc tarball from here http://www.unix-ag.uni-kl.de/~massar/vpnc/ 5. Unzip and explode the tarball 6. modify tap-win32.h to change #define TAP_COMPONENT_ID "tap0801" to "tap0901" (No sure if this is necessary but I did it and it is working for me) 7. make 8. You should have a shinny new vpnc.exe 9. Download openvpn from http://openvpn.net/download.html. I used openvpn-2.1_rc4-install.exe as all other version I tried had errors during install 10. Run the exe but only install the TAP-Win32 Adapter V9 11. Go to control Panel | Network Connections and rename the TAP device to my-tap 12. create a /etc/vpnc/default.conf file something like this ------------- begin ------------- IPSec gateway YOURGATEWAY IPSec ID YOURID IPSec obfuscated secret YOURREALYLONGHEXVALUE (you can use your clear text password here if you remove obfuscated) Xauth username YOURUSERNAME Xauth password YOURPASSWORD Interface name my-tap Interface mode tap Local Port 0 ------------- end --------------- See the general config section above and the manpage for details. ========= Known problems =================================================== Known problems: Problem: In some environments it may happen that stuff works for a while and then stops working. Reason: The dhcp leases are very short intervals and on each renew the dhcp client overwrites things like /etc/resolv.conf and maybe the default route. Solution: Fix your dhcpclient. On Debian that problem can be fixed by installing and using resolvconf to modify that file instead of modifying it directly. ============================================================================
A declarative, efficient, and flexible JavaScript library for building user interfaces.
๐ Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. ๐๐๐
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google โค๏ธ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.