guytp / burst-sharp Goto Github PK

[10:52:52] Processed J:\Burst\plots\1567212183075360343_1000000001_1903760_1903760 in 5.714814 secs = 21.3201409529689 MBps
[10:52:52] Read J:\Burst\plots 0.12184064GB in 5.71489 secs = 21.1727591281058 MBps

[10:52:47] Processed I:\Burst\plots\1567212183075360343_900000001_508032_508032 in 0.9606363 secs = 33.8463662053995 MBps
[10:53:25] Processed I:\Burst\plots\1567212183075360343_900508033_7110424_7110424 in 38.4084982 secs = 11.8480845991526 MBps
[10:53:25] Read I:\Burst\plots 0.487581184GB in 39.369258 secs = 12.3700578761225 MBps

[10:53:04] Processed H:\Burst\plots\1567212183075360343_800000001_7618456_7618456 in 18.1166769 secs = 26.9133896183797 MBps
[10:53:04] Read H:\Burst\plots 0.487581184GB in 18.1167948 secs = 26.881134625425 MBps

I drive is a 130gb and 1.8tb plot shown as 0.12gb?
H drive is a 1.9tb plot but shows as 0.487gb?
J drive is a 487gb plot shown as 0.487gb?

All plots were created with the AIO client so xplotter I believe and are optimized by default.

Currently the miner will not create unoptimised stagger sizes which means these files are not processed and deadlines will be missed.

Resolution: Support stagger sizes

Only pooled mining is supported, Solo mining should also be supported by the app.

Resolution: Add support for solo mining.

Would be nice to be able to turn down the verbosity on the miner logs.

Right now the greenish text tends to be redundant with the full file name etc. and it's a very long line that wraps that even fullscreen on 1080p for me causes the text to wrap. Perhaps an option to disable that Processed: messages in config

Precision on the MBps could also be set so 21.1112341413245235Mbps is shown as 21.1 or 21.11 instead as that level of prevision just complicates the log viewing.

Rather than just creating zip/tgz files per-platform with appropriate binaries in create appropriate installers:

• MSI for Windows
• Packages for each Linux platform as appropriate
• Bundle to ".app" for MacOS and distribute as .dmg

When I try to run "dotnet ./Miner.dll" it just gives me this error message:

Did you mean to run dotnet SDK commands? Please install dotnet SDK from:
http://go.microsoft.com/fwlink/?LinkID=798306&clcid=0x409

I think it might be because there is no file named Miner.dll anwhere in /burst-sharp or /burst-sharp/Miner as far as i'm aware. And the command dotnet ./miner.dll is looking for that file and can't find it.

Is it possible the actual file is missing from the repository? I installed it on two raspberry pis and both had same error...
Looking through the repo the miner.dll file is missing and after watching guy's video I see that he actually has a file named miner.dll
The way I installed this is by "git clone https://github.com/guytp/burst-sharp.git"
if that matters.

Readme should be updated with

• Config setup
• DotNet installation
• Pre-Requisites (including those for DotNet)
• General details about the application / author
• Acknowledgement to hashlib

Have been mining for a while with latest release, and keep getting timeout requesting block status 3 times before every new block.