gnoddep / mausberry

'Driver' for the Mausberry shutdown circuit

Mausberry Shutdown Circuit

More info on https://mausberry-circuits.myshopify.com/

This replaces the setup.sh and switch.sh scripts of Mausberry. It watches the shutdown circuit so that when the button is switched to OFF it can shutdown the machine cleanly.

The big difference between this code and the code from Mausberry is that this does not run a loop to check the state of the GPIO pin, but uses an interrupt and thus uses a lot less resources.

Requirements

Python 3 Python module RPi.GPIO

Install

make install
sudo systemctl daemon-reload
sudo systemctl enable mausberry

Uninstall

make uninstall
sudo systemctl daemon-reload

License

MIT license, see the LICENSE file.