glock42 / omnicache-fast24-artifacts

OmniCache: Collaborative Caching for Near-storage Accelerators

This repository contains the artifact for reproducing our FAST '24 paper "OmniCache: Collaborative Caching for Near-storage Accelerators".

Table of Contents

• Overview
• Setup
• Running experiments
• Known Issues

Overview

Directory structure

├── libfs                          # Userspace library (LibFS)
├── libfs/scripts                  # Scripts to mount NearStorageFS and microbenchmark scripts
├── libfs/benchmark                # Microbenchmark executables
├── kernel/linux-4.15.0            # Linux kernel
├── kernel/linux-4.15.0/fs/crfs    # Emulated device firmware file system (NearStorageFS)
├── appbench                       # Application workloads
├── LICENSE
└── README.md

Environment:

Our artifact is based on Linux kernel 4.15.18 and it should run on any Linux distribution. The current scripts are developed for Ubuntu 18.04.5 LTS. Porting to other Linux distributions would require some script modifications.

Our artifact requires a machine equipped with Intel Optane persistent memory. To enable outside access to Optane servers, we are using a different machine with a slightly lower memory capacity.

Setup

NOTE: If you are using our provided machine for AE, we have cloned the code and installed the kernel for you. The repo path is /localhome/aereview, you can directly go to Step 4.

1. Get OmniCache source code on Github

$ cd /localhome/aereview
$ git clone https://github.com/RutgersCSSystems/omnicache-fast24-artifacts

2. Install required libraries for OmniCache

$ cd omnicache-fast24-artifacts
$ ./deps.sh # If you are using our provided machine for AE, then you don't need to reinstall the dependency.

NOTE: If you are prompted during Ubuntu package installation, please hit enter and all the package installation to complete.

3. Compile the kernel first

First, we need to install our modified kernel and then reboot.

NOTE: If you are using our provided machine for AE, we have installed the kernel for you. You don't need to reinstall the kernel.

$ cd omnicache-fast24-artifacts
$ source scripts/setvars.sh
$ ./scripts/compile_kernel.sh
$ Open /boot/grub.cfs in sudo mode
$ Select the kernel 4.15.18 as the default kernel in the boot and replace the following line
'linux   /boot/vmlinuz-4.15.18 root=UUID=cbcd0ffe-978a-11e9-9a6b-0cc47afdfd54 ro scsi_mod.use_blk_mq=1 maybe-ubiquity'
to
'linux   /boot/vmlinuz-4.15.18 root=UUID=cbcd0ffe-978a-11e9-9a6b-0cc47afdfd54 ro scsi_mod.use_blk_mq=1 maybe-ubiquity memmap=80G$80G'
$ Save the changes to grub
$ sudo reboot
$ After reboot, check the kernel version. It should be 4.15.18

4. Set environmental variables and compile and install libraries

Please use screen to manage the terminal session and maintain the connection.

$ screen
$ cd omnicache-fast24-artifacts
$ source scripts/setvars.sh
$ cd $LIBFS
$ source scripts/setvars.sh
$ make && make install

Please note, if you get logged out of the SSH session or reboot the system (as mentioned below), you must repeat step 4 and set the environmental variable again before running.

5. Mount NearStorageFS

First, check where the storage is mounted

$ ls /dev/pmem*

The output could be /dev/pmem0 or /dev/pmem1

Then mount the near-storage FS to either /dev/pmem0 or /dev/pmem1

$ cd $BASE/libfs
$ ./scripts/mount_nearstoragefs.sh pmem0
or
$ ./scripts/mount_nearstoragefs.sh pmem1

If successful, you will find a NearStorageFS (device-level FS) mounted as follows after executing the lsblk

pmem0       259:3    0 248.1G  0 disk /mnt/ram

Running Experiments:

Run micro-bench

Assume the current directory is the project root directory.

$ cd omnicache-fast24-artifacts
$ source scripts/setvars.sh
$ cd $BASE/libfs/benchmark/
$ mkdir build
$ make

0. Run a "Hello world" example for kick-the-tires:

$ cd $BASE/libfs/benchmark/
$ ./scripts/run_omnicache_quick.sh

Expect output will be similar to Benchmark takes 0.97 s, average thruput 4.45 GB/s. If you can see the above output, you are good for all necessary environmental settings. You can start running all other experiments for artifact evaluation.

1. Run (Figure 4):

For sequential access (Figure 4a and Figure 4b)

$ cd $BASE/libfs/benchmark/ae_scripts/figure4
$ ./figure4-seq.sh
$ python3 results-extract-seq.py
$ cat RESULT-seq.csv

For random access (Figure 4c and Figure 4d)

$ cd $BASE/libfs/benchmark/ae_scripts/figure4
$ ./figure4-rand.sh
$ python3 results-extract-rand.py
$ cat RESULT-rand.csv

2. Run (Figure 6):

$ cd $BASE/libfs/benchmark/ae_scripts/figure6
$ ./figure6.sh
$ python3 results-extract.py
$ cat RESULT.csv

3. Run (Figure 7):

$ cd $BASE/libfs/benchmark/ae_scripts/figure7
$ ./figure7.sh
$ python3 results-extract.py
$ cat RESULT.csv

4. Run (Figure 8):

$ cd $BASE/libfs/benchmark/ae_scripts/figure8
$ ./figure8.sh
$ python3 results-extract.py
$ cat RESULT.csv

5. Run (Figure 11):

$ cd $BASE/libfs/benchmark/ae_scripts/figure11
$ ./figure11.sh
$ python3 results-extract.py
$ cat RESULT.csv

6. Reboot system (optional):

The system may require occasional restarts because of a compatibility issue between our motherboard and Optane hardware, which makes Optane responsive. To reboot, we recommend using our hardware reboot emergency script instead of the traditional sudo reboot. To use our emergency script,

# Navigate to the artifact's root folder
$ cd /localhome/aereview/omnicache-fast24-artifacts
$ sudo scripts/emergency.sh   

Run LevelDB

Assume the current directory is the project root directory.

1. Compile SHIM Library

SHIM library intercepts POSIX I/O operations and directs them to the OmniCache library for converting them to NearStorageFS commands.

$ cd $BASE/libfs/libshim
$ ./makeshim.sh

2. Compile LevelDB

$ cd $BASE/appbench/leveldb/ae_scripts/
$ ./make_db_bench.sh

3. Run YCSB (Figure 12a)

$ cd $BASE/appbench/leveldb/ae_scripts/figure12a
$ ./figure12a.sh
$ python3 results-extract.py
$ cat RESULT.csv

4. Run LevelDB dbbench (Figure 13)

$ cd $BASE/appbench/leveldb/ae_scripts/figure13
$ ./figure13.sh
$ python3 results-extract.py
$ cat RESULT.csv

Run KNN (Figure 12b)

$ cd $BASE/libfs/benchmark/knn/
$ mkdir build
$ make
$ cd $BASE/libfs/benchmark/knn/ae_scripts/figure12b
$ ./figure12b.sh
$ python3 results-extract.py
$ cat RESULT.csv

Running with NOVA file system (Figure 4)

1. Compile NOVA kenrel

First, we need to compile and install kernel of NOVA and then reboot.

NOTE: For NOVA evaluation, please use optane1; due to some unknown hardware/system reasons, we could not mount NOVA on the optane0 machine, but it can work well with optane1. And If you are using our provided machine for AE, we have installed the NOVA kernel (version 5.1.0) for you. You don't need to reinstall the kernel.

$ cd omnicache-fast24-artifacts
$ source scripts/setvars.sh
$ ./scripts/compile_kernel_nova.sh
$ sudo reboot
# Then select kernel 5.1.0 in grub during rebooting

2. Mount NOVA (After rebooting with kernel 5.1.0)

$ cd omnicache-fast24-artifacts
$ source scripts/setvars.sh
$ cd $BASE/libfs
$ ./scripts/mountnova.sh

3. Run NOVA with microbench (Figure 4):

$ cd $BASE/libfs/benchmark/ae_scripts/figure4
$ ./figure4_nova.sh
$ python3 results-extract-nova.py
$ cat RESULT-nova.csv

Validate PM Bandwidth

$ cd $BASE/libfs
$ ./scripts/mountdax.sh
$ cd $BASE/libfs/benchmark/ae_scripts/validate-pm/
$ ./figure4_pm.sh
$ python3 results-extract-rand.py
$ cat RESULT.csv

Known issues

1. The system may require occasional restarts because of a compatibility issue between our motherboard and Optane0, which makes Optane irresponsive. To reboot, we recommend using our hardware reboot emergency script instead of the traditional sudo reboot. To use our emergency script,

# Navigate to the artifact's root folder
$ cd /localhome/aereview/omnicache-fast24-artifacts
$ sudo scripts/emergency.sh   

After rebooting, as mentioned in step 4 above, make sure to set the environmental variable again.

3. LevelDB may occasionally hang after dbbench finishes. Simply pressing Ctrl-c to kill the process can solve the issue.