FNIRSI GC-01: Clock resets, long boot time about radpro

[PsychoBitchy]

Edit: The device eventually goes back to life, but after a solid 30 seconds or so.
I had the impression it was stucked because at some point the boot process is much longer.
Not a bug, closing

[Gissio]

Most likely your CR1220 battery needs replacement!

I've added your issues to the Q&A section of the user's manual.

[PsychoBitchy]

Right, the button battery is indeed flat dead.
That will solve the Date/hour resetting issue.
But the device with 2.0Rc4 firmware still hangs at some point, I'm not able to replicate consistently.
Will report here if changing the Button battery replacement fixes this issue as well.

[Gissio]

It's not actually hung, it's Rad Pro waiting for the microprocessor to start the real-time clock. The CH32 takes quite a while to do that.

Once you replace the battery, it should start right away.

[PsychoBitchy]

Hello, just a small update on this case:
Replacing the board backup CR1220 battery indeed fixed every issues I had.
Thanks for pointing out and eagle-eye spotting the issue here.