girishchukka / litesata Goto Github PK

              __   _ __      _______ _________
             / /  (_) /____ / __/ _ /_  __/ _ |
            / /__/ / __/ -_)\ \/ __ |/ / / __ |
           /____/_/\__/\__/___/_/ |_/_/ /_/ |_|

               Copyright 2014-2015 / HKU
            Copyright 2015-2018 / EnjoyDigital

        A small footprint and configurable SATA core
                powered by LiteX & Migen

[> Intro
--------
LiteSATA provides a small footprint and configurable SATA core.

LiteSATA is part of LiteX libraries whose aims are to lower entry level of
complex FPGA cores by providing simple, elegant and efficient implementations
of components used in today's SoC such as Ethernet, SATA, PCIe, SDRAM Controller...

Since Python is used to describe the HDL, the core is highly and easily
configurable.

LiteSATA is built using LiteX and uses technologies developed in partnership with
M-Labs Ltd:
 - Migen enables generating HDL with Python in an efficient way.
 - MiSoC provides the basic blocks to build a powerful and small footprint SoC.

LiteSATA can be used as LiteX library or can be integrated with your standard
design flow by generating the verilog rtl that you will use as a standard core.

[> Features
-----------
PHY:
  - OOB, COMWAKE, COMINIT
  - ALIGN inserter/remover and bytes alignment on K28.5
  - 8B/10B encoding/decoding in transceiver
  - Errors detection and reporting
  - 32 bits interface
  - 1.5/3.0/6.0GBps supported speeds (respectively 37.5/75/150MHz system clk)
Core:
  Link:
    - CONT inserter/remover
    - Scrambling/Descrambling of data
    - CRC inserter/checker
    - HOLD insertion/detection
    - Errors detection and reporting
  Transport/Command:
    - Easy to use user interfaces (Can be used with or without CPU)
    - 48 bits sector addressing
    - 3 supported commands: READ_DMA(_EXT), WRITE_DMA(_EXT), IDENTIFY_DEVICE
    - Errors detection and reporting

Frontend:
  - Configurable crossbar (simply declare your crossbar and use crossbar.get_port() to add a new port!)
  - Ports arbitration transparent to the user
  - Synthetizable BIST
  - Striping module to segment data on multiple HDDs and increase write/read speed and capacity. (RAID0 equivalent)
  - Mirroring module for data redundancy and increase read speeds. (RAID1 equivalent)

[> FPGA Proven
--------------
LiteSATA is already used in commercial and open-source designs:
- High End 50Mpixels CMOS Camera using CFAST & SD cards.
- Low latency database research.

[> Possible improvements
------------------------
- add standardized interfaces (AXI, Avalon-ST)
- add NCQ support
- add AES hardware encryption
- add on-the-flow compression/decompression
- add support for Altera PHYs.
- add support for Lattice PHYs.
- add support for Xilinx 7-Series GTP/GTH (currently only 7-Series GTX are
  supported)
- add Zynq Linux drivers.
- ... See below Support and consulting :)

If you want to support these features, please contact us at florent [AT]
enjoy-digital.fr.

[> Getting started
------------------
1. Install Python 3.5, Migen and FPGA vendor's development tools.
   Get Migen from: https://github.com/m-labs/migen

2. Obtain LiteX and install it:
  git clone https://github.com/enjoy-digital/litex --recursive
  cd litex
  python3 setup.py develop
  cd ..

3. TODO: add/describe example design(s)

[> Tests
--------
Unit tests are available in ./test/.
To run all the unit tests:
  ./setup.py test
Tests can also be run individually:
  python3 -m unittest test.test_name

[> License
----------
LiteSATA is released under the very permissive two-clause BSD license. Under the
terms of this license, you are authorized to use LiteSATA for closed-source
proprietary designs.
Even though we do not require you to do so, those things are awesome, so please
do them if possible:
 - tell us that you are using LiteSATA
 - cite LiteSATA in publications related to research it has helped
 - send us feedback and suggestions for improvements
 - send us bug reports when something goes wrong
 - send us the modifications and improvements you have done to LiteSATA.

[> Support and consulting
-------------------------
We love open-source hardware and like sharing our designs with others.

LiteSATA is developed and maintained by EnjoyDigital.

If you would like to know more about LiteSATA or if you are already a happy
user and would like to extend it for your needs, EnjoyDigital can provide standard
commercial support as well as consulting services.

So feel free to contact us, we'd love to work with you! (and eventually shorten
the list of the possible improvements :)

[> Contact
----------
E-mail: florent [AT] enjoy-digital.fr