gfto / tsdecrypt Goto Github PK

tsdecrypt reads and decrypts CSA encrypted incoming mpeg transport stream over UDP/RTP using code words obtained from OSCAM or similar CAM server. tsdecrypt communicates with CAM server using cs378x (camd35 over tcp) protocol or newcamd protocol.

Home Page: http://georgi.unixsol.org/programs/tsdecrypt/

License: GNU General Public License v2.0

C 90.87% Makefile 1.84% Shell 1.78% Roff 5.50%

tsdecrypt's People

Contributors

Stargazers

Watchers

Forkers

jcdutton masbog tele-twin catcatsl thomasgalland neolynx liminwang gfthr ozanyusufoglu omegafb1 jackuzzy ggnull35 jansaris qmwd2006 fuinha ttyant kiio1 ridams kierank opene2 daedalus basicmaster liumorgan satis4action ensdlpyt malakudi usingtcnower marceluphd petervictory gennnarino hammingbyte karimdavoodi dbl0null pombredanne jackbro tnt-wolve 2php stmwiz 5l1v3r1 blowfish64 rgerganov pikpikcu dwm97317 recursosonline qoputuqyu kirubhakaran-victor micaelsilva dukecd33369 afriza dysdy heitbaum

tsdecrypt's Issues

Help please dvblast+tsdecrypt+oscam issue (no image no nothing in vlc)

FTA working ok

But scrambled ones not working.
here is a sample of output

2013-11-09 19:47:38 | --- | ECM CAID: 0x1801 (NAGRA)
2013-11-09 19:47:38 | --- | ECM pid : 0x1583 (NAGRA) (forced: 0x1583)
2013-11-09 19:47:38 | ECC | SID 0x0157 ------------ EcmChng: 0 ms
2013-11-09 19:47:38 | ECM | SID 0x0157 CAID: 0x1801 PID 0x1583 Table: 0x81 Length: 74 Data: 81 30 47 07 45 21 11 86 00 88 96 cc da c7 6f ..
2013-11-09 19:47:38 | CW | OK: Valid code word was received.
2013-11-09 19:47:38 | CW | SID 0x0157 CAID: 0x1801 CW_recv: 206 ms LastKey: 504 ms Data: 41 53 8e 22 fd ab a4 4c 74 b2 37 5d 26 06 d9 05
2013-11-09 19:47:38 | SDT | Service 0x0157 ( 343) Type: 0x01 (Tv) Provider: " DIGI TV" Service: "DIGI FILM HD"
2013-11-09 19:47:40 | ECM | Received 1 (17 dup) and processed 1 in 3 seconds.
2013-11-09 19:47:45 | ECC | SID 0x0157 ------------ EcmChng: 7587 ms
2
debug: frontend has acquired signal
debug: frontend has acquired carrier
debug: frontend has acquired stable FEC
debug: frontend has acquired sync
info: frontend has acquired lock
frontend has acquired lock
debug: - Bit error rate: 0
debug: - Signal strength: 0
debug: - SNR: 359

README: default decryption lib

The README still mentions libdvbcsa as default decryption lib - the makefile in contrast uses FFdecsa. So it seems that the READMe has to be adopted.

[feature request] drop ca descriptors

would be nice to filter out all ca descriptors from pmt after descrambling.

I have a problem with the buffer size...

dmesg:
2018-12-09 15:35:15 | Decode buffer is full, waiting...
CBUF [ decode]: size:379008 pos:169012 writepos:169200 input:21393460 output:21014640 free_data:188 buffered:378820
2018-12-09 15:35:15 | Decode buffer is full, waiting...
CBUF [ decode]: size:379008 pos:189316 writepos:189504 input:21413764 output:21034944 free_data:188 buffered:378820
2018-12-09 15:35:15 | Decode buffer is full, waiting...
CBUF [ decode]: size:379008 pos:206236 writepos:206424 input:21430684 output:21051864 free_data:188 buffered:378820
2018-12-09 15:35:15 | Decode buffer is full, waiting...

What can I do, that i have a bigger decode buffer?
Can i change it in a source file, and then new compile the tsdecrypt?

Larger ECMs (e.g. TNTSAT) are not handled

Since some time TNTSAT uses larger ECMs (e.g. 360 bytes). tsdecrypt currently doesn't decode such ECMs, as the maximum payload is limited due to CAMD35 constraints. The related warning message is currently disabled.

Using a larger message data size (1, 2) fixes the issue, if a different CAMD protocol is used. However it currently requires manual modification to the code.

PowerVu

Any plans of adding powervu as a decoding option?

cant clone from you, certificate fails

Automatic ECM pid fails after some time

Using tsdecrypt on some VIACCESS channels that have different ECM pids for different viaccess providers, for example 0500:050F00, 0500:043800 and 0500:051E00. Newcamd line supports both 43800 and 50F00 but not 51E00. Everything works as expected, tsdecrypted switches between providers if there is an issue (timeout, cw not found etc) but after some time (can be days or hours) it seems it gets in a situation that only keeps retrying 051E00 which is not supported. I tried to debug it but the issue happens after some time so it is difficult. Any thoughts?

segfault

Since about a month ago I keep getting the following;

[1192839.448892] tsdec-decode[7071]: segfault at 7f61d2eb2090 ip 000055e2530c44d3 sp 00007f60d2eb1fa0 error 4 in tsdecrypt[55e2530b6000+35000]
[1192839.450102] tsdec-decode[23942]: segfault at 7fd5a1ab3090 ip 000055fb467d74d3 sp 00007fd4a1ab2fa0 error 4 in tsdecrypt[55fb467c9000+35000]
[1192839.465903] tsdec-decode[6998]: segfault at 7f53299c6690 ip 000055e55e10c4d6 sp 00007f52299c5fa0 error 4 in tsdecrypt[55e55e0fe000+35000]
[1192839.478560] tsdec-decode[23995]: segfault at 7f4d122bd6a8 ip 000055b8008714e0 sp 00007f4d0e1dcfa0 error 4 in tsdecrypt[55b800863000+35000]

Do you know how I can debug this?

http support

Hi,

i use a eyetv netstream SAT. I get the streams only via http.
i have already tried to record with vlc to a file and discramble it via tsdecrypt, but vlc gets header errors, i think because it is encrypted ;-)
is there a way to use http streams?

best regards

celevra

TS Stream not being decoded correctly

Have a stream Im pulling in and when using the filters seeing lots of errors for EMM streams

2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x0103 Table: 0x02 Length: 165 SKIP: 02 b0 a2 1d e7 f7 00 00 e9 32 f0 05 0e 03 c0 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 132 SKIP: 82 70 81 50 02 f4 7d da 04 67 7e 23 00 00 eb ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 112 SKIP: 82 70 6d 50 03 72 4b 78 02 79 b4 44 00 00 db ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 130 SKIP: 82 70 7f 50 03 72 4f 68 02 c2 6d bf 00 00 ea ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 172 SKIP: 82 70 a9 50 02 c2 6d f5 04 40 1b 09 00 00 f9 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 169 SKIP: 82 70 a6 60 04 40 1b 11 02 f1 d9 ef 02 f1 da ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 166 SKIP: 82 70 a3 50 02 f1 da 21 02 f4 7d db 00 00 ed ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 85 SKIP: 82 70 52 40 02 f4 7d dd 00 00 e5 02 00 46 90 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 137 SKIP: 82 70 86 c0 ab fe 26 29 00 00 ff 07 7a 01 30 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x0934 Table: 0x00 Length: 448 SKIP: 00 01 bd 00 b2 84 80 24 2f 31 65 af 3f ff ff ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 142 SKIP: 82 70 8b 40 02 c2 6e 01 00 01 c0 41 02 00 7e ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 165 SKIP: 82 70 a2 60 03 78 10 40 02 a4 94 73 02 f4 7d ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 147 SKIP: 82 70 90 60 04 40 1b 1e 04 40 1b 20 04 40 1b ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 137 SKIP: 82 70 86 c0 ab fe 6a cb 00 00 ff 07 7a 01 30 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x0000 Table: 0x00 Length: 20 SKIP: 00 b0 11 08 2d c3 00 00 00 00 e0 10 1d e7 e1 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 109 SKIP: 82 70 6a 60 02 c2 6e 10 02 c2 6e 13 02 c2 6f ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 113 SKIP: 82 70 6e 40 03 72 51 e2 00 00 f3 02 00 63 90 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 115 SKIP: 82 70 70 40 03 72 52 d1 00 00 f4 02 00 64 90 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x82 Length: 176 SKIP: 82 70 ad 50 02 c2 6f 1b 02 f4 7d df 00 00 f2 ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x0934 Table: 0x00 Length: 448 SKIP: 00 01 bd 00 b2 84 80 24 2f 31 65 cb 5f ff ff ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x0932 Table: 0xde Length: 2196 SKIP: de 78 91 c0 12 eb 49 3a 33 1b bf 3a 97 b7 bc ..
2016-11-01 14:18:29 | EMM | SID 0x1de7 CAID: 0x0960 PID 0x00c0 Table: 0x83 Length: 177 SKIP: 83 70 ae 60 04 63 17 0a 04 5d 40 a0 04 63 17 ..

As you see we have EMM filters that start with 00 01 bd 00, any one else seen these.

I can record a stream if needed

Full TS decryption

We need full TS decryption using Professional CAM under Linux. Is it supported?

Динамична смяна на ECM PID при няколко PID-а в поток

Здравей,
Програмата работи отлично. Благодаря за вложените знания и труд.

Възможно ли е да се добави възможност за промяна на ECM пидовете за една и съща кодираща система?
Например в Viaccess се случва да има ECM пидове за различните версии Viaccess и без ръчно форсиране не работи.

Това е от дебъг:

Надявам се да не е сложно за добавяне.
Благодаря предварително.

viaccess 0500 ECM not being sent

Started with "-X 0x01f5" (to force this particular ECM PID)
PID 0x01f5 is correct but for some reason tsdecrypt fails to send this PID and then switches to 0x02bd

2018-04-18 18:27:43 | --- | ECM pid : 0x02bd (VIACCESS) (forced: 0x01f5)
2018-04-18 18:27:43 | --- | ECM pid : 0x01f5 (VIACCESS) idx:0
2018-04-18 18:27:43 | --- | ECM pid : 0x02bd (VIACCESS) idx:1
2018-04-18 18:27:43 | NEW | Input PID 0x0065 appeared (PMT)
2018-04-18 18:27:43 | NEW | Input PID 0x00c9 appeared (H.264/14496-10 video (MPEG-4/AVC))
2018-04-18 18:27:43 | NEW | Input PID 0x0191 appeared (13818-3 audio (MPEG-2))
2018-04-18 18:27:43 | NEW | Input PID 0x012d appeared (13818-3 audio (MPEG-2))
2018-04-18 18:27:43 | NEW | Input PID 0x0259 appeared (H.222.0/13818-1 PES private data)
2018-04-18 18:27:43 | SDT | Service 0x1005 ( 4101) Type: 0x01 (Tv) Provider: "GLOBECAST" Service: "6 TER"
2018-04-18 18:27:43 | NEW | Input PID 0x0011 appeared (SDT)
2018-04-18 18:27:43 | NEW | Input PID 0x01f5 appeared (ECM)
2018-04-18 18:27:43 | NEW | Input PID 0x0014 appeared (TDT/TOT)
2018-04-18 18:27:43 | NEW | Input PID 0x0012 appeared (EPG)
2018-04-18 18:27:43 | NEW | Input PID 0x0010 appeared (NIT)
2018-04-18 18:27:43 | ECC | SID 0x1005 ------------ EcmChng: 0 ms
2018-04-18 18:27:43 | ECM | SID 0x1005 CAID: 0x0500 PID 0x01f5 Table: 0x81 Length: 188 Data: 81 70 b9 00 80 29 90 07 04 14 00 08 06 0a 00 ..
2018-04-18 18:27:43 | ERR | [newcamd] Card was not able to decode the channel.
2018-04-18 18:27:43 | ECM | Switching ECM pid to 0x02bd (701) idx:1
2018-04-18 18:27:43 | ECC | SID 0x1005 ------------ EcmChng: 141 ms
2018-04-18 18:27:43 | ECM | SID 0x1005 CAID: 0x0500 PID 0x01f5 Table: 0x80 Length: 188 Data: 80 70 b9 00 80 29 90 07 04 14 00 08 06 0a 00 ..
2018-04-18 18:27:43 | NEW | Input PID 0x02bd appeared (ECM)
2018-04-18 18:27:43 | ERR | [newcamd] Card was not able to decode the channel.

I have verified from other sources that the correct ECM pid is 0x01f5 however for some reason tsdecrypt doesnt send this ECM and switches to the next, "Switching ECM pid to 0x02bd (701) idx:1"

--input-service

Hey, you do not plan to make multi --input-service?

can't detect ident CONAX

Hello.

git version cant find ECM pids on CONAX,
2017-12-13 18:06:25 | *** | ERROR: Can't detect ECM pid.

please check it...

version from official release 10.0
2017-12-13 18:05:27 | CA System : CONAX | CAID: 0x0b00 (2816)
...
2017-12-13 18:05:27 | CAMD proto : newcamd
2017-12-13 18:05:27 | CAMD addr : 127.0.0.1:3008 (IPv4/IPv6)
....
2017-12-13 18:05:27 | EMM process: No
2017-12-13 18:05:27 | ECM process: Yes
2017-12-13 18:05:27 | ECM report : 60 sec
2017-12-13 18:05:27 | CW warning : 60 sec
2017-12-13 18:05:27 | Start tsdecrypt v10.0 (release, build 2017-12-13_12:40 libdvbcsa)
...
2017-12-13 18:05:27 | Output connected to fd:4
2017-12-13 18:05:27 | CAM | Connecting to server 127.0.0.1 port 3008
2017-12-13 18:05:27 | CAM | Connected to server 127.0.0.1 port 3008 (addr=127.0.0.1 fd=5).
2017-12-13 18:05:27 | CAM | [newcamd] Card info: CAID 0x0B00 Admin=YES srvUA=0000000072F63560
2017-12-13 18:05:27 | CAM | [newcamd] Card info: Provider 0 : 000000 : 000000000032F516
2017-12-13 18:05:27 | PAT | Using service 0x1586 (5510), PMT pid: 1587 (5511)
2017-12-13 18:05:27 | NEW | Input PID 0x0000 appeared (PAT)
2017-12-13 18:05:27 | --- | ECM CAID: 0x0b00 (CONAX)
2017-12-13 18:05:27 | --- | ECM pid : 0x0070 (CONAX)
2017-12-13 18:05:27 | NEW | Input PID 0x1587 appeared (PMT)

empty output

Hi, when i try to decrypt ts source with tsdecrypt --const-cw 0x00000000000000001111111111111111
--input encrypted-file.ts --output file://decrypted-file.ts command the output file is always empty.
Why?
thanks

wrong biss key decodes as correct

Hello.
I have a rare situation where a ts file with the wrong biss cw produces a video.
It's black with a few pixels changing constantly.
The program doesn't report that the key is wrong.
I can send you the file and more info if you are interested,which unfortunately i think is not the case.

Not An Issue But A Question

Im looking at adding a "hardware" CSA Descrambler to my network, its an old satellite design I worked on years ago, so I was going to add a tcp connection to pass something along the lines of "START:224.2.3.4:1234,225.3.4.5:1234,65,11223366112233663322116633221166" to it which would either start the multicast streams, set the pids and keys or if already running update the dvb descrambler with the new keys

The Hardware I have access to has 3 TS inputs, accessable via memory, and 64 pids per TS. So in theory the limiting factor would be the network speed, 100mbps

What would be the best way of doing this interfacing to TSDECRYPT

Crash without any information

Hello.

tsdecrypt crash on loading ...

$ ./tsdecrypt -s 192.168.10.20:3008 -U osc2 -P osc2 -B 0102030405060708091011121314 -c CONAX -A NEWCAMD -C 0x0B00 -1 10.10.10.10 -I 230.230.1.200:2234 -o 10.10.10.10 -O 230.230.1.200:3234
2017-12-13 12:30:57 | Syslog : disabled
2017-12-13 12:30:57 | CA System : CONAX | CAID: 0x0b00 (2816)
2017-12-13 12:30:57 | Input addr : udp://230.230.1.200:2234/
2017-12-13 12:30:57 | Input src : 10.10.10.10
2017-12-13 12:30:57 | Output addr: udp://230.230.1.200:3234/
2017-12-13 12:30:57 | Output intf: 10.10.10.10 (IPv6 intf index:-1)
2017-12-13 12:30:57 | Output ttl : 1
2017-12-13 12:30:57 | Out filter : enabled (output only service related PIDs)
2017-12-13 12:30:57 | TS discont : report
2017-12-13 12:30:57 | Decoding : threaded
2017-12-13 12:30:57 | CAMD proto : newcamd
2017-12-13 12:30:57 | CAMD addr : 192.168.10.20:3008 (IPv4/IPv6)
2017-12-13 12:30:57 | CAMD user : osc2
2017-12-13 12:30:57 | CAMD pass : osc2
2017-12-13 12:30:57 | CAMD deskey: 0102030405060708091011121314
2017-12-13 12:30:57 | EMM process: No
2017-12-13 12:30:57 | ECM process: Yes
2017-12-13 12:30:57 | ECM report : 60 sec
2017-12-13 12:30:57 | CW warning : 60 sec
2017-12-13 12:30:57 | Start tsdecrypt v10.0 (v10.0-44-g4ecdc6d, libdvbcsa)
Segmentation fault (core dumped)
$ gdb tsdecrypt core
GNU gdb (Ubuntu 7.7.1-0ubuntu5~14.04.2) 7.7.1
Copyright (C) 2014 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later http://gnu.org/licenses/gpl.html
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law. Type "show copying"
and "show warranty" for details.
This GDB was configured as "x86_64-linux-gnu".
Type "show configuration" for configuration details.
For bug reporting instructions, please see:
http://www.gnu.org/software/gdb/bugs/.
Find the GDB manual and other documentation resources online at:
http://www.gnu.org/software/gdb/documentation/.
For help, type "help".
Type "apropos word" to search for commands related to "word"...
Reading symbols from tsdecrypt...done.
[New LWP 25827]
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/x86_64-linux-gnu/libthread_db.so.1".
Core was generated by `./tsdecrypt -s 192.168.10.20 3008 -U osc2 -P osc2 -B 01020304050607080910111213'.
Program terminated with signal SIGSEGV, Segmentation fault.
#0 0x000000000041af85 in notify_func (ts=ts@entry=0x62bfa0 , sync_msg=sync_msg@entry=0, msg_id=msg_id@entry=0x4243fa "START", msg_text=msg_text@entry=0x7fff9b541110 "Starting tsdecrypt v10.0 (v10.0-44-g4ecdc6d, libdvbcsa)")
at notify.c:188
188 if (ts->notify->notifications) {
(gdb) bt
#0 0x000000000041af85 in notify_func (ts=ts@entry=0x62bfa0 , sync_msg=sync_msg@entry=0, msg_id=msg_id@entry=0x4243fa "START", msg_text=msg_text@entry=0x7fff9b541110 "Starting tsdecrypt v10.0 (v10.0-44-g4ecdc6d, libdvbcsa)")
at notify.c:188
#1 0x000000000041b223 in notify (ts=ts@entry=0x62bfa0 , msg_id=msg_id@entry=0x4243fa "START", text_fmt=text_fmt@entry=0x4243ee "Starting %s") at notify.c:212
#2 0x00000000004046b4 in main (argc=, argv=) at tsdecrypt.c:1013
(gdb)

please check it

Cycle through all ECM without specifying CAID or ca system

Is it possible to have tsdecrypt cycle through all different CAID and send all ECM to the server ?

The way that you currently don't need to specify the ECM PID. I would like to not be forced to specify the ca-system.

crash

[root@localhost tsdecrypt]# ./tsdecrypt --emm --camd-proto NEWCAMD --camd-server 127.0.0.1:34000 --camd-user user1 --camd-pass user1 --camd-des-key 000102030405060708090A0B0C0D --input 235.1.1.1:1234 --output 238.1.1.1:1234 --caid 0x4AD2
2022-09-18 23:22:47 | Syslog : disabled
2022-09-18 23:22:47 | CA System : UNKNOWN | CAID: 0x4ad2 (19154)
2022-09-18 23:22:47 | Input addr : udp://235.1.1.1:1234/
2022-09-18 23:22:47 | Input src : 0.0.0.0
2022-09-18 23:22:47 | Output addr: udp://238.1.1.1:1234/
2022-09-18 23:22:47 | Output intf: 0.0.0.0 (IPv6 intf index:-1)
2022-09-18 23:22:47 | Output ttl : 1
2022-09-18 23:22:47 | Out filter : enabled (output only service related PIDs)
2022-09-18 23:22:47 | TS discont : report
2022-09-18 23:22:47 | Decoding : threaded
2022-09-18 23:22:47 | CAMD proto : newcamd
2022-09-18 23:22:47 | CAMD addr : 127.0.0.1:34000 (IPv4/IPv6)
2022-09-18 23:22:47 | CAMD user : user1
2022-09-18 23:22:47 | CAMD pass : user1
2022-09-18 23:22:47 | CAMD deskey: 000102030405060708090A0B0C0D
2022-09-18 23:22:47 | EMM process: Yes
2022-09-18 23:22:47 | EMM report : 60 sec
2022-09-18 23:22:47 | ECM process: Yes
2022-09-18 23:22:47 | ECM report : 60 sec
2022-09-18 23:22:47 | CW warning : 60 sec
2022-09-18 23:22:47 | Start tsdecrypt v10.0 (v10.0-50-g1b573a5, libdvbcsa)
2022-09-18 23:22:47 | Connecting input to 235.1.1.1 port 1234
2022-09-18 23:22:47 | Input connected to fd:3
2022-09-18 23:22:47 | Connecting output to 238.1.1.1 port 1234 ttl 1
2022-09-18 23:22:47 | Output connected to fd:4
2022-09-18 23:22:47 | CAM | Connecting to server 127.0.0.1 port 34000
2022-09-18 23:22:47 | CAM | Connected to server 127.0.0.1 port 34000 (addr=127.0.0.1 fd=5).
2022-09-18 23:22:49 | CAM | [newcamd] Card info: CAID 0x4AD2 Admin=YES srvUA=00000000000000F4
2022-09-18 23:22:49 | CAM | [newcamd] Card info: Provider 0 : 00030C : 0000000000000000
2022-09-18 23:22:49 | CW | ERR No valid code word was received for 2 seconds!
2022-09-18 23:22:49 | PAT | Using service 0x0324 (804), PMT pid: 0610 (1552)
2022-09-18 23:22:49 | NEW | Input PID 0x0000 appeared (PAT)
2022-09-18 23:22:49 | *** | ERROR: Can't detect ECM pid.