fss / solis-inverter Goto Github PK

Hi! can you tell me if it works for you to set the interval to something else rather than the 30 seconds default? I could not get it to work using the INTERVAL command, also my solis is updating it's values every 60 seconds and not the 30 seconds default option, does someone have any clue of why this is happening?

On run on my raspberry pi, I get:
`module.js:549
throw err;
^

Error: Cannot find module 'axios'
at Function.Module._resolveFilename (module.js:547:15)
at Function.Module._load (module.js:474:25)
at Module.require (module.js:596:17)
at require (internal/module.js:11:18)
at Object. (/home/pi/PROJECTS/SOLIS_INVERTER/solis-inverter-master/lib/solis_inverter_client.js:1:77)
at Module._compile (module.js:652:30)
at Object.Module._extensions..js (module.js:663:10)
at Module.load (module.js:565:32)
at tryModuleLoad (module.js:505:12)
at Function.Module._load (module.js:497:3)`

even thou I can get a packge with wget:

`wget https://registry.npmjs.org/axios/-/axios-0.21.1.tgz
--2021-06-18 11:23:41-- https://registry.npmjs.org/axios/-/axios-0.21.1.tgz
Resolving registry.npmjs.org (registry.npmjs.org)... 104.16.22.35, 104.16.16.35, 104.16.17.35, ...
Connecting to registry.npmjs.org (registry.npmjs.org)|104.16.22.35|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 95962 (94K) [application/octet-stream]
Saving to: ‘axios-0.21.1.tgz’

axios-0.21.1.tgz 100%[=============================================================================================================>] 93.71K --.-KB/s in 0.007s

2021-06-18 11:23:41 (12.2 MB/s) - ‘axios-0.21.1.tgz’ saved [95962/95962]`

Hi There,
Any advice on what to use as the username/password - or where to find them please?
I have looked through the inverter device ui but cant see where this is set anywhere.

Any help greatly appreciated

Dave

Hi, I just want to see if anyone knows how to integrate the solis-inverter output to Home Assistant, to be able to read it's values. I have the following json output:

{"lastSeen":1605035609563,"inverter":{"model":"00B7",,"firmwareMain":"003A","firmwareSlave":"001B"},"logger":{,"version":"MW_08_512_0501_1.80","mode":"STA","ap":{"ssid":"AP_724118333","ip":"10.10.100.254",},"sta":{"ssid":"Home","ip":"192.168.1.48","rssi":"42%"}},"remoteServer":{"a":true,"b":false},"power":2626,"energy":{"today":32,"total":647}}

But I don't know how I can make a sensor in Home Assistant that would read for instance the "power" value.

Any help it's appreciated.

Thanks

My inverter does not output data for firmwareMain and firewareSlave so following condition tests false.

Hi! I am trying to use your script but I get the error Address not given. Here is my command:

node index.js --address 192.168.1.48 --username admin --password admin --port 10000

Do you have an idea of what might be happening?

This is my inverter

Firmware version (main)003A
Firmware version (slave)001B
Inverter model00B