florianuhlemann / evse

EVSE

EVSE

Introduction

This collection of library shall enable the development of an EVSE based on an STM32F0 microcontroller. It is the software for the CircuitMaker project linked above.

controlpilot_stm32

This library configures and enables the interface main interface for handling the EVSE logic with the vehicle.

encoder_stm32

This library configures and enables the interface for a possible rotary encoder to be used as the user interface.

flash_stm32

This library configures and enables the interface for storing data between reboot.

font8x8_basic

This library represents a selection of font glyphs that are used with the OLED display.

helper_stm32

This library provides a selection of functions that configure the STM32F0 and bridge multiple libaries.

oled_stm32_ssd1306

This library configures and enables the interface for SPI to an SSD1306-based OLED display.

usart_stm32_console

This library configures and enables the interface for USART to an FTDI chip for debug information.

userbutton_stm32

This library configures and enables the interface for a selection of buttons to be used as the user interface.

ws2812_led

This library configures and enables the interface for a 1-wire signal to control a WS2812B-based LED array.