fernthedev / arduino-desktop-morse

Blinks in morse code what the desktop client says. Built using Rust and C++

Desktop IP to Arduino Morse code

This is a combination of a desktop companion and Arduino software.

• The desktop companion periodically polls for connected Arduino modules running the software in this repo.
• After it is found, it will send all the IPs matched by arguments in the desktop companion or found interfaces otherwise.
• Once the Arduino receives the IP, it will blink in morse code.
• After it is done, it will keep the LED on for 4 seconds to indicate it's done.

This communicates using the USB serial port and sends a fernocat\n ping every 500 ms to the host. The Arduino will relay back the message twice:

• First to start
• Second when finished blinking and waiting 4 seconds

Build

Desktop Companion

Simply just run cargo build. On Windows, you might need to follow the steps for libpnet to build.

Arduino software

While this is using a PlatformIO template, you can theoretically just copy the main.cpp into Arduino IDE, and it should work.