faangbait / esp32_rgblights_3x-mcp4131 Goto Github PK

View Code? Open in Web Editor NEW

0.0 0.0 0.0 48 KB

Controlling RGB lights strands by sending independent voltages down each wire

License: GNU General Public License v3.0

Python 6.28% C 93.72%

esp32_rgblights_3x-mcp4131's People

Contributors

Watchers

esp32_rgblights_3x-mcp4131's Issues

Pot/PCB expects Ground/R/G/B

First set of LED strings I got was Ground, RGB. Second set I got was +5V, RGB.

So far it looks like the workaround is to wire the + into the 5V VCC being supplied by the board. This causes the wipers on the pot to work backwards (255 is off instead of full).

CLK/MOSI running to bad pins

Current PCB has CLK/MOSI running to pins that can't be used by SPI. Fixed by cutting traces and rewiring to new pins; will resolve in schematic/pcb at some point

Pad for switch sideways (Omron)

Have to rotate switch 90 degrees if using B3F-1000 switches with existing PCB. Option 1 is to bend the legs of the switch, option 2 is to change switches, option 3 is to rotate the pad 90 degrees on the PCB (not physically rotating the pad, obviously, but rewiring the pins) file. This will be marked fixed when option 3 is implemented.

Recommend Projects