This Vagrant project should allow you to deploy a simple segment routing topology with a controller to get to grips with the configuration involved. Included are 6 Arista vEOS VMs, an Ubuntu 14 VM running Exabgp and a nice graphical controller courtesy of @russellkelly.
References
- Vagrant
- VirtualBox
- Around 9GB of RAM when running in a MacOS environment.
You may find lower memory utilisation on Windows or Linux due to support of memory balooning. This is a known limitation on Mac when using virtualised environments, at least with VirtualBox.
After installing Vagrant and VirtualBox are installed, we need to add the vEOS virtualbox image to Vagrant. Download the following image from https://www.arista.com/en/support/software-download (user registration required):
vEOS-lab/4.20/vEOS-lab-4.20.1F-virtualbox.box
Change directory to the download location and run the following:
vagrant box add vEOS-lab-4.20.1F-virtualbox.box
The box should now be listed as available in Vagrant:
[sean@Seans-MacBook-Pro] Segment-Routing-Demo $ vagrant box list
vEOS-lab-4.20.1F (virtualbox, 0)
Note that Ubuntu doesn't need to added, it will be automatically found by Vagrant.
Providing the vEOS box has been successfully added to Vagrant, we can now go ahead and start building the topology.
git clone https://github.com/perimore/Segment-Routing-Demo.git
cd Segment-Routing-Demo
vagrant up
This will now build the vEOS devices and controller. When finished, log into the devices using:
vagrant ssh controller
vagrant ssh bb1
vagrant ssh bb2
vagrant ssh bb3
vagrant ssh bb4
vagrant ssh bb5
vagrant ssh bb6
vagrant ssh bb1
...
Arista Networks EOS shell
-bash-4.3# FastCli
bb1.16:58:37>en
bb1.16:58:38#
No configuration changes should need to be made.
To use the controller we need to start Exabgp and the controller script. Open two ssh sessions and start the following in each:
Session 1:
cd SR_Demo_Repo
exabgp srdemo.conf
Session 2:
SR_Demo_Repo
./sr_demo.py -a 1.1.1.1 -u admin -p admin
The GUI can now be accessed here as port 5001 of the controller vm has been forwarded to 5002 on your local system: http://localhost:5002/
Once up and running an LU tunnel can be signalled to the bb1 vEOS device. Use the following to push a FEC path and service prefix to bb6:
Tunnel FEC
- Dest FEC: 6.6.6.66 (Lo1 on bb6)
- Dest FEC NH: 12.0.0.2 (NH of bb2)
- Select Primary to push the path to bb1
- Click the nodes in the topology diagram to chose the path taken. I.e. bb5 and bb6.
Service Prefix
- Dest Prefix: 9.9.9.9/32 (can be any prefix not already used)
- Dest Next hop: 6.6.6.66 (NH of the tunnel destination as above)
Note that vEOS does not support data path forwarding of traffic over MPLS. Therefore this is just a control plane test. Once pushed, the label path and service prefix can be seen installed on bb1:
bb1.17:30:13#show ip bgp
BGP routing table information for VRF default
Router identifier 1.1.1.1, local AS number 64512
Route status codes: s - suppressed, * - valid, > - active, # - not installed, E - ECMP head, e - ECMP
S - Stale, c - Contributing to ECMP, b - backup, L - labeled-unicast
Origin codes: i - IGP, e - EGP, ? - incomplete
AS Path Attributes: Or-ID - Originator ID, C-LST - Cluster List, LL Nexthop - Link Local Nexthop
Network Next Hop Metric LocPref Weight Path
* # L 6.6.6.66/32 12.0.0.2 0 100 0 i
* > 9.9.9.9/32 6.6.6.66 0 100 0 i
bb1.17:30:10#show ip bgp detail
BGP routing table information for VRF default
Router identifier 1.1.1.1, local AS number 64512
BGP routing table entry for 6.6.6.66/32
Paths: 1 available
Local
12.0.0.2 labels [ 800004 800005 800006 ] from 10.10.10.10 (10.10.10.10)
Origin IGP, metric 0, localpref 100, IGP metric 1, weight 0, received 00:00:12 ago, valid, internal, not installed (better AD route present)
Rx path id: 0x0
Rx SAFI: Labels
Tunnel RIB eligible
BGP routing table entry for 9.9.9.9/32
Paths: 1 available
Local
6.6.6.66 from 10.10.10.10 (10.10.10.10)
Origin IGP, metric 0, localpref 100, IGP metric 0, weight 0, received 00:00:12 ago, valid, internal, best
Rx path id: 0x0
Rx SAFI: Unicast
bb1.17:30:56#show mpls tunnel fib
Tunnel Type Index Endpoint Nexthop Interface Labels
------------------- ----------- ------------------ -------------- ----------------- -----------------
...
BGP LU 1 6.6.6.66/32 12.0.0.2 'Ethernet1' [ 800004 800005 800006 ]
bb1.17:33:10#show mpls segment-routing bindings
1.1.1.1/32
Local binding: Label: imp-null
Remote binding: Peer ID: 0002.0002.0002, Label: 800001
Remote binding: Peer ID: 0003.0003.0003, Label: 800001
2.2.2.2/32
Local binding: Label: 800002
Remote binding: Peer ID: 0002.0002.0002, Label: imp-null
Remote binding: Peer ID: 0003.0003.0003, Label: 800002
3.3.3.3/32
Local binding: Label: 800003
Remote binding: Peer ID: 0002.0002.0002, Label: 800003
Remote binding: Peer ID: 0003.0003.0003, Label: imp-null
4.4.4.4/32
Local binding: Label: 800004
Remote binding: Peer ID: 0002.0002.0002, Label: 800004
Remote binding: Peer ID: 0003.0003.0003, Label: 800004
5.5.5.5/32
Local binding: Label: 800005
Remote binding: Peer ID: 0002.0002.0002, Label: 800005
Remote binding: Peer ID: 0003.0003.0003, Label: 800005
6.6.6.6/32
Local binding: Label: 800006
Remote binding: Peer ID: 0002.0002.0002, Label: 800006
Remote binding: Peer ID: 0003.0003.0003, Label: 800006
bb1.17:31:02#show ip route 9.9.9.9/32
VRF: default
Codes: C - connected, S - static, K - kernel,
O - OSPF, IA - OSPF inter area, E1 - OSPF external type 1,
E2 - OSPF external type 2, N1 - OSPF NSSA external type 1,
N2 - OSPF NSSA external type2, B I - iBGP, B E - eBGP,
R - RIP, I L1 - IS-IS level 1, I L2 - IS-IS level 2,
O3 - OSPFv3, A B - BGP Aggregate, A O - OSPF Summary,
NG - Nexthop Group Static Route, V - VXLAN Control Service,
DH - Dhcp client installed default route
B I 9.9.9.9/32 [200/0] via 12.0.0.2, Ethernet1 label **800004 800005 800006**
React
Typescript
Django
Laravel
Facebook
Microsoft
Google
Alibaba
D3
Tencent