General purpose this library is create user interface from Embedded aplication.
You create nodes in your application and Embedded Node Configurator will be able to show it for user.
The structure of nodes is completely formed in your project.
You can download the Configurator here.
The lastest library version you can find on release page.
It is application layer protocol according OSI model. It use master - slave architecture.
Master is Configurator. Slave is a device in the network. Access to devices can be done by ID.
If you want to know more visit the wiki library.
It can use serial interfaces such as RS232, RS485, RS422, UART, USB serial.
If you want use CAN interface you should use embedded node CAN protocol.
If you have free interface you can implement all features of this library.
All what you need to do two functions - the read and the write.
The library have storing interface. If you want to write nodes values in non-volatile memory,
you will have to implement own flash write and erase function. This functions have to use flash interface
of the library.
If you have found a bug or have idea then write to the issue page.