Parinfer is a plugin that aims to make writing lisp simple. This library is a minimalistic wrapper around justinbarclay/parinfer-rust-emacs, an Emacs-centric fork of eraserhd/parinfer-rust, to provide an Emacs minor mode. parinfer-rust-mode aims to be a simple implementation of Parinfer that leverages the parinfer-rust plugin to do most of the heavy lifting.
Warning
Version 0.9 and greater of parinfer-rust-mode
only supports my fork of parinfer-rust
, parinfer-rust-emacs
. My primary reason for forking was to add better support for parinfer-rust
options, which will allow parinfer-rust-mode
to work better with non-clojure-like lisps. You can read more here.
For those wanting to continue using parinfer-rust
, you should pin your install to version 0.8.5.
- Making code auto-adhere to formatting conventions
- Influencing expression-nesting with indentation
- Maintaining indentation when expressions shift
- Allowing Paredit-like features without hot keys
- Emacs (26+) compiled with Dynamic Module support.
- Running on MacOS/Linux, with Windows support coming soon.
- (Optional) Curl - to download the library for you
You can install parinfer-rust-mode
from source (this github repo)
cd /path/for/elisp-packages
git clone [email protected]:justinbarclay/parinfer-rust-mode.git
After that add it to your load path and go wild.
(add-to-list 'load-path "/path/to/parinfer-rust-mode")
(require 'parinfer-rust-mode)
(add-hook 'emacs-lisp-mode 'parinfer-rust-mode)
Alternatively, you can tell something like use-package to manage it for you.
(use-package parinfer-rust-mode
:hook emacs-lisp-mode)
You’ll also need to have the library installed on your system for you somewhere.
That’s it. There are no instructions here. When parinfer-rust-mode prompts you to download the library, say yes. parinfer-rust-mode
will then use curl to download parinfer-rust
and save it in ${EMACS_DIRECTORY}/parinfer-rust/
.
Supported OS & Arch[fn:1]
Operating System | Architecture |
Windows | x86_64 |
Darwin | aarch64 |
Linux | x86_64 |
Freebsd | x86_64 |
List of supported operating systems and the architecture for which libraries are prebuilt
If you’re curious, you can find the library files that parinfer-rust-mode downloads as release artifacts for parinfer-rust-emacs.
If you would always like parinfer-rust-mode to keep the library version in sync for you, automatically download it, then add the following line into your config:
(setq parinfer-rust-auto-download t)
If you are using the ==use-package== snippet from above, that would look like:
(use-package parinfer-rust-mode
:hook emacs-lisp-mode
:init
(setq parinfer-rust-auto-download t))
[fn:1] Don’t see your OS/Arch on here? Feel free to open up a PR at parinfer-rust-emacs and add your OS to the GitHub actions.
For the more adventurous, you can also download and compile the parinfer-rust
library from source.
When manually compiling the library, the file name differs from platform to platform. Additionally, Emacs expects that these libraries have specific file extensions when first loading them up. This is a problem for MacOS because Rust compiles it as .dylib
, and we’ll need to give the file an .so
extension when we copy it to its final location.
Platform | File name | Required extension |
---|---|---|
Linux | libparinfer_rust.so | .so |
MacOS | libparinfer_rust.dylib | .so |
Windows | parinfer_rust.dll | .dll |
git clone https://github.com/justinbarclay/parinfer-rust-emacs.git
cd parinfer-rust
cargo build --release
cp ./target/release/${library-name} ~/.emacs.d/parinfer-rust/${lib-name}
Once you have compiled the libraries from source code you’ll need to tell parinfer-rust-mode
how to find these libraries
(setq parinfer-rust-library "/path/to/parinfer-rust-library.so")
Parinfer can operate under three different modes when writing lisp.
Paren Mode gives you full control of parens, while Parinfer corrects indentation. You can still adjust indentation, but you won’t be able to indent/dedent past certain boundaries set by parens on previous lines.
Indent Mode gives you full control of indentation, while Parinfer corrects or inserts close-parens where appropriate. Specifically, it only touches the groups of close-parens at the end of each line.
Smart Mode is like Indent Mode, but it tries to preserve the structure too.
Command | Description |
---|---|
parinfer-switch-mode | Quickly switch between paren, indent, and smart modes |
parinfer-rust-mode-disable | Toggle parinfer-rust-mode mode on or off |
parinfer-rust-toggle-paren | Toggle between paren mode and current mode |
These commands are no longer bound to the C-c C-p
prefix keys by default.
If you prefer to use the old bindings, add this to your configuration (keep in mind it may clash with some major mode bindings):
(define-key parinfer-rust-mode-map (kbd "C-c C-p t") #'parinfer-rust-toggle-paren-mode)
(define-key parinfer-rust-mode-map (kbd "C-c C-p s") #'parinfer-rust-switch-mode)
(define-key parinfer-rust-mode-map (kbd "C-c C-p d") #'parinfer-rust-toggle-disable)
parinfer-rust-mode is purposefully light on option, but it does give a few options to tweak behavior.
parinfer-rust-library
The location to find or install the parinfer-rust library.
default: ~/.emacs.d/parinfer-rust/parinfer-rust-*.so
parinfer-rust-library-dir
The directory to store or to find the parinfer-rust library in. This allows a more fine grained approach to installing the parinfer library, if you don’t want to rename the library itself.
default: ~/.emacs.d/parinfer-rust/parinfer-rust-*.so
parinfer-rust-preferred-mode
The mode you want parinfer-rust-mode to start in. Options:
- smart
- indent
- paren
default: smart
parinfer-rust-check-before-enable
Perform check on indentation before enabling `parinfer-rust-mode’
If Parinfer detects that it needs to change the indentation in the before first running, it will prompt the user whether it is OK to adjust the indentation. If the user disagrees Parinfer will disable itself. The user may choose to get the prompt immediately whenever parinfer-rust-mode is enabled, defer it until the first change in the buffer, or disable it and never receive a prompt. When disabled, parinfer-rust-mode will run automatically balance the indentation for the user.
Options:
- immediate
- defer
- nil
default: defer
parinfer-rust-auto-download
Have parinfer-rust-mode download the latest version of the parinfer-rust library without prompting you. Generally used for automating your set-up.
default: nil
parinfer-rust-dim-parens
Dim parentheses that are inferred by Parinfer in
indent
andsmart
modes. Color can be configured via theparinfer-rust-dim-parens
face.default: t
parinfer-rust-troublesome-modes
A list of modes that may conflict when run alongside parinfer-rust-mode.
parinfer-rust-mode
will check for these modes when first enabled in a buffer and it will prompt to disable these modes for you. To disable parinfer-rust for checking for these modes, parinfer-rust-troublesome-modes to nil.default: (electric-pair-mode hungry-delete-mode global-hungry-delete-mode)
parinfer-rust-disable-troublesome-modes
Disables troublesome modes without prompting the user.
Troublesome modes are listed in `parinfer-rust-disable-troublesome-modes’. Set this to non-nil to disable troublesome modes without prompting.
default: nil
parinfer-rust-buffer-replace-strategy
The strategy to use when replacing the buffer’s text.When set to `safe’ the buffer is replaced using the slower but more fastiduous `replace-buffer-contents’.
When set to `fast’ the buffer is replaced using `delete-region’.
For more info on why the default is `replace-buffer-contents’, see Info node `(elisp)Replacing’
Options:
- safe
- fast
default: safe
There is an alternate implementation of Parinfer for Emacs called parinfer-mode. It currently has support for Parinfer’s “paren” and “indent”. Additionally, it has had experimental support for “smart” mode, however, this has remained hidden on a branch and not accessible from MELPA for over a year. parinfer-smart-mode aims to be a simpler adaptation of Parinfer that just offers “smart mode”, leveraging the parinfer-rust plugin to do most of the heavy lifting.
- Multiple cursors do not work as intended
- Does not play well with other modes that insert parens or manage whitespace. If you have modes like electric-pair-mode or hungry-delete-mode enabled, you may want to disable them for any mode that has parinfer-rust-mode enabled. To help users work around this we offer to disable known troublesome modes if we detect them.
Sometimes parinfer-rust-mode
can get confused when interacting with some minor modes or certain commands. Check out the wiki for known issues.
In some cases, parinfer-rust-mode can misbehave by making the wrong choices. When that happens I recommend you file a bug report. If you want to make my life easier, I recommend following these two as some pretty great examples on how to file a bug report.
If you’d like to help contribute to the development of parinfer-rust-mode
the only caveat interesting section of note is the testing framework.
parinfer-rust-mode
relies on Cask to manage development libraries and to set-up the tests themselves.
Then after you have made some changes just run:
PARINFER_RUST_TEST=true make test
And you should get something like:
✦ ❯ PARINFER_RUST_TEST=true make test
emacs --version
GNU Emacs 28.0.50
Copyright (C) 2020 Free Software Foundation, Inc.
GNU Emacs comes with ABSOLUTELY NO WARRANTY.
You may redistribute copies of GNU Emacs
under the terms of the GNU General Public License.
For more information about these matters, see the file named COPYING.
cask build
Compiling /home/justin/dev/parinfer-rust-mode/parinfer-helper.el...
Compiling /home/justin/dev/parinfer-rust-mode/parinfer-rust-mode-autoloads.el...
Compiling /home/justin/dev/parinfer-rust-mode/parinfer-rust-mode.el...
In toplevel form:
parinfer-rust-mode.el:72:1: Error: Symbol’s value as variable is void: parinfer-rust-library
Compiling /home/justin/dev/parinfer-rust-mode/test-helper.el...
cask exec ert-runner test/**.el --quiet
...............................................................................................................................................
Ran 143 tests in 0.061 seconds
- Shaun Lebron for creating Parinfer
- Jason Felice for creating and maintaining the parinfer-rust project
- tianshu for helping me fall in love with parinfer-mode in Emacs.
- Andrey Orst for his contributions to this project
- Gerry Agbobada for adding support to customize options in parinfer-rust-emacs