dzungpv / dnckatsw00x Goto Github PK

Hi,
I have downloaded Z-Stack Home 1.2.2a and modify it as yours, then download the hex to my cc2530, but it seems zigbee2mqtt can not find my device, i do not know why. By the way, can i get your CCDefines of the project ? may be there is some wrong defines in my project.

Thanks.

I had added the report code to the Sample Light source code from Z Stack 1.2. but was not able to connect to HomeAssistant. I also tested by changing the Channels. Could you please share a patch containing the required changes?

Thanks in advance

Hi
do you think it's possible to change your code to manage 8 channel?

thanks

Could you please explain how to join the zigbee network? If there is a button required please mention the corresponding digital input of the CC2530.
Thank you!

Hi would you mind sharing the eww project file ?

Everything works great. But the state of the relay and the network does not retain after the reset of the device (cc2530). Once the device is reset, I have to permit joining from the coordinator again in order to connect cc2530.
Could you please provide some info regarding this?
Thank you

is it possible to get pwm version of switch ?

hi loved your script control relay!
but I can not understand : I have is "iobroker", stick cc2531 manages this plugin- https://github.com/ioBroker/ioBroker.zigbee
I connect your firmware sewn ss2530 and coordinator of my network ss2531.
I do not understand, in the list of devices there is a button, but I change its state (true or false) on your module I can not find high or low level ((help to understand

To my knowledge it is not working with zha , is there any way I can add it into zha (home assistant)

So this is a little bit off topic.
@dzungpv
I want to ask you how to exactly wire the CC1352. I am using zibgee2mqtt.
you said to wire Xds110 or later with 4 pin, TMS, TCK, Reset, GND, VCC(3.3V).

in XDS110 there is no TMS. At how to connect the USB Interface?

XDS110 Pin Mapping:

XDS110:

CC1352

I have a problem: I tested the device for a long time, everything works without problems. but once removed from the system , it will not connect again! Flashing the device and coordinator does not solve the problem ((what could be the matter ?

Where can I find the zclSampleLight_LcdDisplayUpdate file?

I can confirm the single relay .hex works with zigbee2MQTT.

It only joins on channel 15 (2425mHz) not the default channel 11 (2405mHz) of Zigbee2MQTT ZAP. So you will have to change the default channel to 15, but be aware that will require rejoining all zigbee devices to network!

I had no issues with re-join after reset which was noted on earlier posts.

I have been trying for far too long to build it from scratch and add more relays and I'm going to have to call it quits. My background isn't programming so its too much to learn Z-stack. I just couldn't get it to compile correctly.
EDIT: I just noticed you need a certain version of AIR to compile this, that's why I was having so many issues.
Dzungpv can you please supply the .hex for the 4 channel or preferably 8ch relay/switch? It would also be beneficial to allow joining of all channels, not just channel 15.

You can send .hex to [email protected].

Thank you!

Hi,
Thank you for this great learning venture.
I am new to ZigBee, following your guide for building it from scratch I am not sure is "zcl_samplelight_data.c" the only file we have to edit? if yes can you share your zcl_samplelight_data.c with the edited code which will help me understand better where to add? After this, I want to recompile this with different RF channel settings to be able to communicate with zigbee2mqtt dongle in homeassistant installation.
Kind Regards and thank you again.