dwarkesh8 / blockscout-monitor

A shell script program to monitor "Blockscout Explorer" and If its status is detected as stopped, restart it automatically.

BlockScout Monitor Script Setup

This repository contains a shell script that monitors the status of the BlockScout service and restarts it if it's down. This guide explains how to clone and set up the script on your Linux Ubuntu server.

Prerequisites

• Linux Ubuntu server
• Git installed (sudo apt-get install git)
• Tmux installed (sudo apt-get install tmux)

Instructions

1. Clone the Repository

   Open a terminal on your Linux Ubuntu server and run the following command to clone the repository:

   git clone https://github.com/dwarkesh8/blockscout-monitor.git
   

2. Make file executable

   chmod +x monitor.sh
   

3. Init Tmux session

   tmux
   

4. Run the shell script

   ./monitor.sh
   

5. Exit/Deteched from Tmux

   Type keyboard shortcut command

   ctrl+b then d
   

Enjoy!!!