dustmap / dustnet-mapper

Dustnet Mapper Node for ttnmapper.org

Dustnet Mapper

This is the firmware for the dustnet mapper. It has been build especially for the Dustmap project. It uses LoRaWAN and The Things Network (short: TTN) and TTNMapper. A more detailed description can be found on this Netidee blog post(German).

This documentation is a work-in-progress.

This open source project has been generously supported by .

Configuration

The configuration can be found in the config.h file. Please be advised that we do not recommend to change anything in here. Except you know exactly, what you are doing. Than you will properly be fine.

Key	Description
APPEUI	The Things Network Application EUI. See The Things Network Integration for more information.
DEVEUI	The Things Network Device EUI. See The Things Network Integration for more information.
APPKEY	The Things Network Application Key. See The Things Network Integration for more information.
MAX_JOINING_DURATION
DEVICE_NAME	Name of the BLE device.
SERVICE_UUID
CHARACTERISTIC_UUID
GPS_CHARACTERISTIC_UUID
LMIC_PIN_NSS
LMIC_PIN_DIO

To compile this code, you need to have the Arduino-LMIC library by Matthijs Kooijman installed. We recommend to check it out directly from Github as using "Manage Libraries..." in the Arduino IDE will most likely fail.

Licence

Copyright 2018 Dustmap.org. All rights reserved.

This work is licensed under the terms of the MIT license. For a copy, see https://opensource.org/licenses/MIT.