h264 usb camera stream about dronebridge

[seeul8er]

The video bitrate might be too high. Try lowering the video bitrate it or try increasing the DroneBridge transmission bitrate (try -b 54 e.g. - In that case you will also need to increase the bitrate when setting the cards into monitor mode. The -b flag is often ignored by drivers.

[hex0r]

your are right, there some issue with the bitrate unfortunately i could not solve it at the moment.
Can i change the bitrate with an command without changing it in the config and restart the service?

[seeul8er]

You will have to kill/stop the video_air part with the pipe from the video source. Then run it with an updated parameter set

[hex0r]

yes i do it that way, but you mentioned
"you will also need to increase the bitrate when setting the cards into monitor mode. The -b flag is often ignored "
how can I change this?
Is this set by the startup python script ?