中文 README 请看 README_CN.md。
Model | XPS15-9550/MacBookPro13,3 | Version | 10.15.7 19H2 |
---|---|---|---|
Processor | Intel Core i5-6300HQ | Graphics | HD Graphics 530 |
Memory | Micron 2133MHz DDR4 8GB x2 | Storage | Samsung PM961 512GB |
Audio | Realtek ALC298 | WiFi/Bluetooth | Dell Wireless 1830 |
Display | Sharp LQ156D1 UHD | Monitor | HKC GF40 FHD 144Hz |
- Discrete GPU
- Thunderbolt
- Bluetooth may not work (explain)
Please use the latest release.
- INTEL: Intel Wireless Card
- BRCM: Broadcom Wireless Card/Dell Wireless Card
This config supports Intel Wireless Card, but the default AirportItlwm.kext
is for BigSur, if you are running other versions of macOS, you have to replace the default one from OpenIntelWireless/itlwm.
OpenCore in latest release can OTA to/install Big Sur, but installing Big Sur on some Samsung SSDs like SM961/PM961 is very likely to fail (I have tried many kinds of configuration but nothing works, my SN550 is fine), do it at your own risk, don't open issue just for installation problem, unless you have a solution.
For 4k display user: WhateverGreen with commit 978cb8 can make panel running at 60Hz, you no longer need the 48Hz patch. Release 201218 in this repo includes the WhateverGreen with that commit and related device properties (you can see what has been changed in commits).
Possible solution: xxxzc#74 (comment)
If your laptop display is 1080p, you have to modify your config.plist:
- OC:
NVRAM/Add/4D1EDE05-38C7-4A6A-9CC6-4BCCA8B38C14/UIScale
->AQ==
- CLOVER:
BootGraphics/UIScale
->1
Or simply run python3 update.py --display fhd
.
You can use Clover Configurator or OpenCore Configurator, but code editor is a better choice.
If you changed kexts/drivers, you can run python3 update.py --config
to update these info to config file. If you changed ACPI, you can run python3 update.py --acpi
.
You can run python3 update.py --self
to update update.py.
You may refer to wmchris's tutorial for the installation guide and solutions to some common issues. And you can also try the OC configuraion in that repository.
But note that please create an issue in this repository if you encounter any problem when using this config (Please don't disturb others). My writing in English is poooooor:(, but I can read :).
Remove -v
in boot-args to turn off verbose mode(printing boot messages on screen).
python3 update.py --set bootarg--v
After updating to 10.15, headphone will be distorted after a few minutes in battery mode.
You have to install ComboJack (run install.sh).
Or you can use ALCPlugFix-Swift:
- run
uninstall-combojack.sh
if you have Combojack installed - double click
install.command
- remove
VerbStub.kext
in kext folder
Please run following commands:
sudo pmset -a hibernatemode 0
sudo pmset -a autopoweroff 0
sudo pmset -a standby 0
sudo pmset -a proximitywake 0
or simply run python3 update.py --fixsleep
.
Please uncheck all options (except Prevent computer from sleeping...
, which is optional) in the Energy Saver
panel.
Please open System Report-Network-Wi-Fi
and check your network interface, if not en0, you have to:
- delete all items in
system preferences-network
left side list. - remove
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
- reboot your computer
- enter
system preferences-network
, click '+' and add Wi-Fi back.
Please use your own SN, MLB and SmUUID, you can copy smbios.json to a new one and change sn, mlb and smuuid
fields to your own, then run python3 update.py --smbios xxx.json
to use them, xxx.json
is the file to store those values.
If you don't have those values, you can run python3 update.py --smbios gen
to generate them(will saved to both gen_smbios.json
and config file).
Highly recommend you to use Windows system UUID as SmUUID: run wmic csproduct get UUID
in Windows CMD.
You can run:
python3 update.py --set rom=$(ifconfig en0 | awk '/ether/{print $2}' | sed -e 's/\://g')
to use the MAC address of en0 as ROM.
If you are using FHD(1080p) display, you may want to enable font smoothing:
defaults write -g CGFontRenderingFontSmoothingDisabled -bool NO # YES to disable
You can set theme to one of these themes.
python3 update.py --set theme=xxx # will download if not exist
Add UUID=xxx none ntfs rw,auto,nobrowse
to /etc/fstab
, xxx is the UUID of your NTFS partition.
If your NTFS partition has Windows installed, you need to run powercfg -h off
in powershell in Windows to disable hibernation.
- Turn off
Enable dragging
or usethree finger drag
to avoid one-finger tap delay. - Turn off
Smart zoom
to avoid two-finger tap delay.
See is-it-possible-to-get-rid-of-the-delay-between-right-clicking-and-seeing-the-context-menu
- acidanthera for providing almost all kexts and drivers
- alexandred for providing VoodooI2C
- headkaze for providing the very useful Hackintool and OS-X-BrcmPatchRAM
- daliansky for providing the awesome hotpatch guide OC-little and the always up-to-date hackintosh solution XiaoMi-Pro-Hackintosh
- RehabMan for providing OS-X-BrcmPatchRAM and hotpatch
- knnspeed for providing well-explained hot patches and USB-C hotplug solution
- wmchris for providing the installation guide for XPS15