doctorandrey / indi_cam10_ccd

Indi driver for DIY Cam10 CMOS camera

indi_cam10_ccd

Making Indi driver for DIY Cam10 CMOS camera (Aptina/Micron MT9M001)

Original code was written in Delphi by Gilmanov Rim (Гильманов Рим). Ascom driver was written by Sergiy Vakulenko. Their code is shared on Sergiy Vakulenko's Github: https://github.com/vakulenko/CAM10_software

This port is based on the code of Gilles Le Maréchal (gehelem) - github

See:

• http://astroccd.org/category/cam10/
• http://www.astroclub.kiev.ua/forum/index.php?topic=28929.0
• http://indilib.org
• https://www.intra2net.com/en/developer/libftdi/documentation/
• http://www.fishcamp.com/pdf/mt9m001_1300_mono.pdf

Before starting:

sudo cp 99-cam10.rules /etc/udev/rules.d/
sudo service udev restart

To use it as stand alone application uncomment:

#define TESTING

Then run it:

./indi_cam10_ccd -p 155 -e 0.5

where -p is the hex value of the test pattern, -e exposure duration in seconds (min 0.1 max 1)

Andrei Prakapovich

indi_cam10_ccd's Issues

Does it work?

Hi Andrey,

did you get your CAM10 work? I was able to compile your code and it runs on my laptop, so I can see pictures taken by the camera, but it looks like shown on your screenshot http://www.astroclub.kiev.ua/forum/index.php?topic=28929.msg563283#msg563283

Cheers,
Semjon