This script can handle drives that don't work with hdparm -S
because
they lack power management features (like the popular WD RED series).
Also, all drives are powered up at the same time when an access to
one of the drives is detected. This makes wake-up from standby a lot
faster for RAID arrays, where the drives would wake up in sequence
with normal hdparm
power-down.
- Tested on Debian 8.11 (jessie):
python3
>= 3.4.2hdparm
>= 9.43
- Edit
raid-sleep.conf
: - Read(!) and Execute
sudo ./install.sh
- This will set up a
systemd
service to start the program
- This will set up a