digital1o1 Goto Github PK

esp32_softwareserial_tx

esp8266_data_logging_graph

esp_8266_adc_gauge

Display the analog data generated from a potentiometer and a random number generated from an ESP8266 and display it to a website. Also provide GPIO manipulation on the mentioned website to toggle an LED on/off

hello_world_debugger_vscode

image_stitching_jetson_nano_opencv

install-opencv-jetson-nano

OpenCV installation script with CUDA and cuDNN support

jetson_nano_check_cuda_support_python

jetson_nano_cuda_test

jetson_nano_startup_script

mpu9250

Arduino library for communicating with the InvenSense MPU-9250 and MPU-9255 nine-axis IMUs.

mpu_9250_calibration

The intention of this repo was to provide a general guideline in order to calibrate the MPU_9250 since there seems to be a lack of documentation on how it should/could be done.

multiple_values_website_esp8266

note_repository

nrf24_multireciever

Using the NRF2401 RF module and a Teensy 4 as the master transmitter to send a string of characters to two slave NRF2401 devices

oled-555-timer

Measure the discharge rate of the capacitor using an Arduino Uno while displaying on an OLED screen if the LED was on/off due to the discharge rate of the capacitor and resistor used in the circuit

open-sourced-eeg-electric-wheelchair

Open Sourced EEG Electric Wheelchair using the Emotiv Insight

opencv_4.7_rpi_install

opencv_cmake_basic_example

opencv_notes

practical-ml-vision-book

raspividyuv_testing

remember_button_state

remotely-debug-c-programs-on-rpi-using-vs-code

rpi_cm4_capture_save_single_image_from_stream

rpicam-apps_testing_ground

simple-cam

A simple camera capture application Personal fork from https://git.libcamera.org/libcamera/simple-cam.git/

sinewave_kalman_filter

This sketch generates a noisy sine wave signal from the ATmega 328 and applies a Kalman filter to attenuate the generated noise

stm32-tutorials

This folder contains all my STM32 programming projects shared on YouTube

stm32f4_freertos_dual_oled

Utilizing the FREERTOS framework on an STM32F411RE to run two OLED displays on a SINGLE I2C bus

tensorflow_teensy_mpu9250

Based on the tutorial from an Arduino Blog post, this repository serves as a stepping stone for those who have Teensy 4 and an MPU-9250 and the desire to jump into Machine Learning