deneyapkart / deneyap-hareket-isik-renk-algilayici-mesafe-olcer-arduino-library

Arduino library for Deneyap Gesture, Color, Proximity Sensor APDS9960

Deneyap Gesture, Color, Proximity Sensor Arduino Library

FOR TURKISH VERSION

***** Add photo ****

Arduino library for Deneyap Gesture, Color, Proximity Sensor APDS9960

🔎Specifications

• Product ID M25 , mpv1.0
• MCU APDS-9960
• Weight
• Module Dimension 25,4 mm x 25,4 mm
• I2C address 0x39

Address
0x39	default address

📕Documentation

Deneyap Gesture, Color, Proximity Sensor

Deneyap Gesture, Color, Proximity Sensor Shematic

Deneyap Gesture, Color, Proximity Sensor Mechanical Drawing

APDS-9960_datasheet

How to install a Arduino Library

📌Deneyap Gesture, Color, Proximity Sensor APDS9960

This Arduino library allows you to use Deneyap Gesture, Color, Proximity Sensor APDS9960 with I2C peripheral. You can use this library in your projects with any Arduino compatible board with I2C peripheral.

🌐Repository Contents

• /docs README_tr.md and product photos
• /examples Examples with .ino extension sketches
• /src Source files (.cpp .h)
• keywords.txt Keywords from this library that will be highlighted in the Arduino IDE
• library.properties General library properties for the Arduino package manager

Version History

1.0.1 - updated funtion(enableGesture) and comment line in examples

1.0.0 - initial release

🚀Hardware Connections

• Deneyap Gesture, Color, Proximity Sensor and Board can be connected with I2C cable
• or 3V3, GND, SDA and SCL pins can be connected with jumper cables

APDS9960	Function	Board pins
3.3V	Power	3.3V
GND	Ground	GND
SDA	I2C Data	SDA pin
SCL	I2C Clock	SCL pin
INT	Interrput

License Information

Please review the LICENSE file for license information.

This code is partly based on the Adafruit APDS9960 Proximity, Light, RGB, and Gesture sensor Arduino Library. Changed to work with Deneyap Gesture, Color, Proximity Sensor APDS9960 Arduino Library. Following their requirements, here is the Adafruit README file:

Adafruit_APDS9960 Build Status

This is the Adafruit APDS9960 Proximity, Light, RGB, and Gesture sensor Library

Tested and works great with the Adafruit APDS9960 Board

http://www.adafruit.com/products/3595 This chip uses I2C to communicate, 2 pins are required to interface

Adafruit invests time and resources providing this open source code, please support Adafruit and open-source hardware by purchasing products from Adafruit!

Written by Dean Miller, Limor Fried for Adafruit Industries. BSD license, check license.txt for more information All text above must be included in any redistribution

To install, use the Arduino Library Manager and search for "Adafruit APDS9960 Library" and install the library.