dannywithjoy / ios-pods-dfu-library

DFU Library for iOS 8+. Cocoa Pods release

iOS DFU Library

Installation

For Cocoapods:

• Create/Update your Podfile with the following contents

  target 'YourAppTargetName' do
      use_frameworks!
      pod 'iOSDFULibrary'
  end
  

• Install dependencies

  pod install
  

• Open the newly created .xcworkspace and begin working on your project.

For Carthage:

-- Create a new Cartfile in your project's root with the following contents

     github "NordicSemiconductor/IOS-Pods-DFU-Library" ~> x.y //Replace x.y with your required version

• Build with carthage

  carthage update --platform iOS //also OSX platform is available for macOS builds
  

• Carthage will build the iOSDFULibrary.framework and iOSDFULibrary.dSYM files in Carthag/Build/ , you may now copy those files to your project and use the library

---

Device Firmware Update (DFU)

The nRF5x Series chips are flash-based SoCs, and as such they represent the most flexible solution available. A key feature of the nRF5x Series and their associated software architecture and S-Series SoftDevices is the possibility for Over-The-Air Device Firmware Upgrade (OTA-DFU). See Figure 1. OTA-DFU allows firmware upgrades to be issued and downloaded to products in the field via the cloud and so enables OEMs to fix bugs and introduce new features to products that are already out on the market. This brings added security and flexibility to product development when using the nRF5x Series SoCs.

This repository contains a tested library for iOS 8+ platform which may be used to perform Device Firmware Update on the nRF5x device using an iPhone or an iPad.

DFU library has been designed to make it very easy to include these devices into your application. It is compatible with all Bootloader/DFU versions.

---

Documentation

See the documentation for more information.

---

Requirements

The library is compatible with nRF51 and nRF52 devices with S-Series Soft Device and the DFU Bootloader flashed on.

---

DFU History

• SDK 4.3.0 - First version of DFU over Bluetooth Smart. DFU supports Application update.
• SDK 6.0.0 - DFU Bootloader supports Soft Device and Bootloader update. As the updated Bootloader may be dependent on the new Soft Device, those two may be sent and installed together.
• SDK 6.1.0 - Buttonless update support for non-bonded devices.
• SDK 7.0.0 - The extended init packet is required. The init packet contains additional validation information: device type and revision, application version, compatible Soft Devices and the firmware CRC.
• SDK 8.0.0 - The bond information may be preserved after an application update. The new application, when first started, will send the Service Change indication to the phone to refresh the services.

• Buttonless update support for bonded devices - sharing the LTK between an app and the bootloader.

Check platform folders for mode details about compatibility for each library.

---

Resources

• DFU Introduction
• How to create init packet
• nRF51 Development Kit (DK) (compatible with Arduino Uno Revision 3)
• nRF52 Development Kit (DK) (compatible with Arduino Uno Revision 3)