d3vl / avatar-firmware-updates Goto Github PK

Not sure if this been worked on, but after I start recording, everything goes fine until it reaches around 1 minute, that video starts braking up and showing a lot of artifacts.
Using an Avatar HD V2 32Gb with Gyroflow, with firmware 33.39.10 and it only happens on the internal DVR of the VTX, on Googles everything looks good all the time.

Edit:
Adding a video example.
https://youtu.be/1OKsIVtzjiY

Hi.

Current focus mode - this is very very bad compared to DJI - always have -50% of image because focus mode make unreadable picture - only big boxes. Need adaptive

As per the title, We need to reverse engineer the meaning behind the version numbers and properly label them on the site.

The USB-C to HDMI is absolutely awesome. However, it would be really great to be able to have spectators ride along inside the goggles. It's just such an amazing experience that can't be replicated on a screen.

Thank you for all your hard work on this project.

When using high powers (700-1200mw) SNR in goggles decreasing - goggles jamming themselves. goggles start using MCS3 from MCS4. At low power modes - there is no such..

DVR from googles have jerky video like 15 fps
Please fix this!

test INav 5.1, 6.0
firmware 28.32.10
matek F405WMN (firmware matekf405TE)
after installing the menu items OSD INAV ver. 5.1, 6.0, saving, restarting matek, restart goggles, fonts in glasses are displayed incorrectly. INAV is selected in the glasses menu.

No matter what signal on other antennas - if the transmitter loses connection with the googles - the googles use the first antenna to communicate with the transmitter - then the video transmission signal is turned off completely - and other antennas are not important - they can be removed - muffled - i.e. all transmission quality depends only on the first antenna and that's it! I did not expect this! You can do this simple test yourself - turn on 25mW, step back until the signal is already not very good - and cover the first antenna with your hand - you will lose the signal completely, regardless of the fact that you may still have super duper patches (2-4 antennas)

Hello, I am seeing a significant signal loss with a new Happy Model Mobula7 BNF that has the 1S VTX in it. When flying in my house and between rooms approximately no more than 20 feet I will get FPV video smearing followed by the RED border in the goggle feed. Goggles and VTX are on the latest 28.32.10 firmware, with Reset All completed, 500mw, Standby Mode ON as I am using the BF OSD. I have tried all available channels via FCC hack and no difference in performance. I am using the Black Walksnail goggles with stock antennas and I have also tried the Walksnail patch antennas with no difference. As soon as I take off within 5 feet the signal bar drops 1 bar and continues to fluctuate during the flight within a 60 foot flight pattern, sometimes to 0 bars. When outside I get perfect signal and can fly up to 80m without signal loss. The issue seemed to be the penetration of the walls inside the house. I have also turned OFF any wifi in my house to rule this out and NO difference in video performance. Franco Fpvsardegna on the Walksnail FB group has reported he is seeing the same issue and recommends downgrading to 27.32.10 firmware.

Please can Inav OSD be developed and documented