cryptohawaii-com / pepecoin-dockerfiles

Pepe/Meme Coin Master Node automated build using Docker

CryptoHawaii Pepe/Meme Coin Docker

Details:

Memetic Master Node - Ideally this is run on 2 CPU(s).

What the script does:

Installs docker and builds 2 docker containters, 1 master node containter, 1 seed node containter. Provides a TEMP website for you to enter your Master Node Priv Key. Once you enter your Master Node Priv Key, web server is shutdown and master node is started. Read full Installation Instructions below.

This will create (1) master node and (1) seed node:

1. Seeding server on port 29377
2. Masternode on port 29387

*all rewards goto you for helping out with the seeding.

https://www.youtube.com/watch?v=yOjFrc1UXTc&feature=youtu.be

What you need to do (general overview):

1. Wallet - create master node - IP of your node:29387
2. Fund the received address with 15,000 coins (it may or may not charge you) it'll be live after 15 confirmations.

• Send EXACTLY 15,000 coins - otherwise you will get errors. (our video walk through was wrong to send 15,010 coins)

3. Get config and input in the 1-time entry URL @ the IP of your server
   • After you input the key the website will never work again (if you make a mistake you'll have to reinstall)
4. Click on your MN to start receiving payments.

Notes :

Help us out, sign the petition for Hawaii to allow Coinbase: http://cryptohawaii.com

If you want assistance email [email protected]

Installation Instructions:

Required: Fresh install Ubuntu 16.04

ssh to server and run

Install withOUT SWAP

bash -c "$(wget -O - https://raw.githubusercontent.com/CryptoHawaii-com/pepecoin-Dockerfiles/master/install.sh)"

Install with SWAP

bash -c "$(wget -O - https://raw.githubusercontent.com/CryptoHawaii-com/pepecoin-Dockerfiles/master/createswap.sh)" && bash -c "$(wget -O - https://raw.githubusercontent.com/CryptoHawaii-com/pepecoin-Dockerfiles/master/install.sh)"

Installation time takes approx 20 minutes, pepecoind will be compiled from the latest git pull, this part can be slow. Once the installation is completed you will have 1 running docker container. The name of the container is "pepecoin"

docker ps

output will look similar to this:

f93f055fd7d7 pepecoin "/bin/sh -c '/root..." 19 hours ago Up 3 hours 0.0.0.0:29377->29377/tcp pepecoin

Required

You must now activate your master node or manually stop the webserver.

Activating your master node is very simple. When generating your masternodeprivkey configuration you will need the following details: We will be using port 29387 for the master node since 29377 is in use for the seed node

serverip = your.server.ip.address

serverport = 29387

Browse to your servers ip address with https://

https://your.server.ip.address

You will be prompted to accept the self signed cert and proceed.

Enter your masternodeprivkey exactly as your wallet outputs. For more information on the wallet setup http://cryptohawaii.com/memetic-masternode/

Once you enter and submit your masternodeprivkey, your masternode docker container will start and the URL will destroyed. This means if you have entered the masternodeprivkey incorrectly, you will need to rebuild the entire node from scratch (start over).

check that both containers are now running

docker ps

output will look similar to this:

79edd506a5c3        pepecoinmasternode   "/root/.pepecoin/p..."   10 hours ago        Up 3 hours          0.0.0.0:29387->29387/tcp   pepecoinmasternode

f93f055fd7d7        pepecoin             "/bin/sh -c '/root..."   19 hours ago        Up 3 hours          0.0.0.0:29377->29377/tcp   pepecoin

OPTIONAL: If you are not a master node STOP the webserver

If you are not hosting a master node, you need to stop the webserver to secure the system. ssh into your server and execute the following 2 commands.

systemctl stop apache2

and then

systemctl disable apache2

We hope you choose to run a master node.

Command Line Usage

The following commands assume you have basic linux knowledge and have an ssh connection already established to your server. There are 2 docker containers running: pepecoin and pepecoinmasternode

List running containers

docker ps

To enter a container

docker exec -it CONTAINERNAME bash

where CONTAINERNAME is pepecoin or pepecoinmasternode (i.e. docker exec -it pepecoinmasternode bash)

you will see a new root prompt once in the container example output:

root@localhost:~# docker exec -it pepecoin bash
root@f93f055fd7d7:/#

pepecoind commands in container

Execute pepecoind commands within a container like this

/root/.pepecoin/pepecoind COMMAND

for example

/root/.pepecoin/pepecoind getinfo

All files are located in /root/.pepecoin on each node pepecoin.conf is located /root/.pepecoin/pepcoin.conf

If you found this helpful don't be shy to donate:

MEME/PEPE : PWpvpjXvEuMEA42d1vGhZDMsoFCcHE9Aar

BTC : 1DMjyW6V5enMPhzDQBR9QeU3Rt8B6EFjUK

ZEN CASH : znUe52p5ZCrfFGLNBsJPgvdJMRcgeytoiQ2

LTC : LVh26vHmUirETSYmymkGJTCFyhNRACvuEL

ETH : 0x777ace7f2fbbbf29ad86d0a00e759953970393aa

pepecoin-dockerfiles's Issues

masterprivactivate.sh needs several updates

masterprivactivate.sh needs to

1. remove apache2
2. remove port 443 from firewall rules

container does not start on reboot

docker container does not start reboot

masternode.php does not echo privkey to user

masternode.php does not echo privkey to user for confirmation.

bootstrap blockchain

bootstrap blockchain

108.61.216.160:80 failed

Install MN failed due this issue:

...
http://108.61.216.160/cryptochainer.chains/chains/PepeCoin_blockchain.zip
Connecting to 108.61.216.160:80... failed: Connection timed out.
Retrying.

truncate debug.log in docker containers

truncate debug.log in docker containers. they are growing.

provide final instructions after "watches are setup"

echo final instructions to console so users know to goto https://ip.add.rr.ess to complete master node setup

typo in masternode pepecoin.conf

masternopeaddr=

SSL not setup properly