connorrigby / xlink-kai Goto Github PK

using the 1.2 pi zero image on a zero W. Plugged in an hdmi cable and watched the bootup. Seems to mess up about here:

mmc1: new high speed SDIO card at address 0001
erlinit:error setting controlling terminal: /dev/ttyS0
EXT4-fs (mmcblk0p3): VFS: Can't find ext4 filesystem
erlinit: Cannot mount /dev/mmcblk0p3 at /root: Invalid argument
erlinit: Specified boot file 'bootloader' not found. Auto-detecting.
Found more than one boot file. Using shoehorn.boot.

Something seems to be wrong with mounting partition 3. nothing after that works. Tried the 1.2 pi 3 image (on a pi 3, obviously) and got a similar error, ending with the behavior described in #1 . The 1.1 release works fine on the pi 3.

Just burned the image as it sits and modified the config-kai.json to update wifi settings. RPI Connected to wifi fine but port 80 isnt reachable on the device at all. Web browser cant reach the rpi on port 80 and curl returns connection reset.

Hi ConnorRigby, I can't seem to get connect to my router properly with the xlink config text document. any chance you could give a better example as its stuck at nonblocking pool is initialized.
I'm on a raspberry pi 3 with the latest version installed to my sd card.

Trying to build this from source and it looks like I am missing something important...

cd src/libkaiui/; make
/bin/sh: line 0: cd: src/libkaiui/: No such file or directory