[TOC]
Created 2018.05.25 by William Yu; Last modified: 2019.03.19-V1.0.f
Contact: [email protected]
Copyleft! 2019 William Yu. Some rights reserved.
[1] Cmake https://cmake.org/cmake-tutorial/
http://sewm.pku.edu.cn/src/paradise/reference/CMake%20Practice.pdf
[2] git
[3] Ubuntu1604
[1] Eigen 线性代数库 http://eigen.tuxfamily.org/dox-devel/modules.html
[2] Sophus 李代数库
[3] OpenCV 计算机视觉库 https://docs.opencv.org/3.3.1/d9/df8/tutorial_root.html
[4] PCL 点云库 http://pointclouds.org/documentation/tutorials/
[5] Ceres 用于通用最小二乘问题的求解的非线性优化库 http://ceres-solver.org/tutorial.html
[6] g2o 基于图优化的非线性优化库 http://pointclouds.org/documentation/tutorials/
[7] gstam 基于因子图优化的SLAM后端库
[8] DBoW3 词带模型库
[9] Octomap 八叉树地图库
-
安装g++,git,cmake等常用工具,编辑器推荐使用VSCode
$ sudo apt-get install -y cmake git g++
-
(视觉SLAM十四讲_2017年3月第一版)P44 安装Eigen(线性代数库)
$ sudo apt-get install libeigen3-dev
-
P60 安装pangolin
sudo apt-get install libglew-dev cd ~/src git clone https://github.com/stevenlovegrove/Pangolin.git cd <path_to_pangolin> mkdir build cd build cmake .. make -j4 sudo make install
-
P77 编译Sophus
cd ~/src git clone https://github.com/strasdat/Sophus.git cd Sophus git checkout a621ff mkdir build cd build cmake .. make -j4 只需编译即可,无需安装,编译之后的Sophus文件夹不要删除! =====================可能会出现的问题============================ #-------------------问题描述-------------------# CMakeLists.txt里面调用时是这么写的: # Sophus find_package( Sophus REQUIRED ) include_directories( ${Sophus_INCLUDE_DIRS} ) #然而我的Sophus安装在/home/will/src/Sophus/路径下,find_package找不到 #-------------------解决方案-------------------# 改为: # Sophus set(Sophus_DIR /home/will/src/Sophus/build)#路径改为自己的安装路径 find_package( Sophus REQUIRED ) include_directories( ${Sophus_INCLUDE_DIRS} ) =======================solved===============================
-
P95 安装OpenCV-3.3.1
P223-确保安装了VIZ模块
(获取源码,opencv官网下载,或者使用/3rdparty文件夹下源码即可)
# 安装依赖项 $ sudo apt-get install -y build-essential $ sudo apt-get install -y python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-dev libtiff-dev libjasper-dev libdc1394-22-dev $ sudo apt-get install -y libgfortran3 $ sudo apt-get install -y --allow-unauthenticated libgfortran3 $ sudo apt-get install -y cmake git libgtk2.0-dev pkg-config libavcodec-dev libavformat-dev libswscale-dev $ sudo apt-get install -y python-dev python-numpy libtbb2 libtbb-dev libjpeg-dev libpng-dev libtiff-dev libjasper-dev libdc1394-22-dev $ sudo apt-get install -y libvtk5-dev # 获取源码,opencv官网下载,或者使用/3rdparty文件夹下源码即可 # opencv_contrib源码地址https://github.com/opencv/opencv_contrib/tree/3.4 will@Will:~$ cd ~/src/opencv-3.3.1 will@Will:~/src/opencv-3.3.1$ ls opencv-master.zip opencv-master opencv_contrib-master.zip opencv_contrib-master will@Will:~/src/opencv-3.3.1$ cd opencv-master will@Will:~/src/opencv-3.3.1/opencv$ ls 3rdparty cmake CONTRIBUTING.md doc LICENSE platforms samples apps CMakeLists.txt data include modules README.md #编译安装 will@Will:~/src/opencv-3.3.1/opencv$ mkdir build will@Will:~/src/opencv-3.3.1/opencv$ cd build/ will@Will:~/src/opencv-3.3.1/opencv/build$ cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D INSTALL_PYTHON_EXAMPLES=ON -D INSTALL_C_EXAMPLES=ON -D OPENCV_EXTRA_MODULES_PATH=../../opencv_contrib_master/modules -D PYTHON_EXECUTABLE=/usr/bin/python3.5 -D BUILD_EXAMPLES=ON -D WITH_VTK=ON .. will@Will:~/src/opencv-3.3.1/opencv/build$ make -j4 will@Will:~/src/opencv-3.3.1/opencv/build$ sudo make install #注意:sudo make install之后,~/src/opencv3.3.1/opencv/build文件夹切勿删除 --------------------------------------------------------- #补充说明 $ cmake -D CMAKE_BUILD_TYPE=RELEASE -D CMAKE_INSTALL_PREFIX=/usr/local -D INSTALL_PYTHON_EXAMPLES=ON -D INSTALL_C_EXAMPLES=ON -D OPENCV_EXTRA_MODULES_PATH=../../opencv_contrib_master/modules -D PYTHON_EXECUTABLE=/usr/bin/python3.5 -D BUILD_EXAMPLES=ON .. 其中 -D表示定义,其后是命令和参数, 第一个是编译类型,源码是是release(release是比较稳定的版本,建议用这个版本),所以参数是RELEASE。 第二个是安装路径。 第三个和第四个是是否安装C与Python例子。 第五个是扩展模块路径。 第六个是python可执行程序路径。 第七个是是否编译例子。 最后那两个点表示上一级目录,而上一级目录是源码,所以一定不要去掉。 #延伸阅读 https://my.oschina.net/VenusV/blog/1476666 =====================可能会出现的问题============================ #------------------------问题描述---------------------------# 测试程序时,发现路径不对, 运行出现error while loading shared libraries: libopencv_highgui.so.2.4 #------------------------问题分析---------------------------# 是opencv的库路径没有设置好 #------------------------解决方案---------------------------# opencv路径配置,运行命令 $ sudo ldconfig 给系统加入opencv库的环境变量(也就是库存放的路径,注意不是解压路径) 用vim打开/etc/ld.so.conf,注意要用sudo打开获得权限,不然无法修改 : $ sudo vim /etc/ld.so.conf 在文件中加上一行 /usr/loacal/lib user/loacal是opencv安装路径 就是makefile中指定的安装路径 再运行 $ sudo ldconfig 然后修改bash.bashrc文件 $ sudo gedit /etc/bash.bashrc 在文件末尾加入这两句: PKG_CONFIG_PATH=$PKG_CONFIG_PATH:/usr/local/lib/pkgconfig export PKG_CONFIG_PATH 然后更新 $ source /etc/bash.bashrc 【参考】:http://blog.csdn.net/gaobobo138968/article/details/24253703 ========================solved================================
-
P99 安装PCL点云库
书中的安装或许有问题,请参照下列方法 1、下载PCL源代码 $ git clone https://github.com/PointCloudLibrary/pcl.git 或者直接去https://github.com/PointCloudLibrary/pcl.git网页下载。 2、安装依赖库 $ apt-get install cmake g++ libboost1.58-all-dev libeigen3-dev libflann-dev python libusb-1.0-0-dev libudev-dev freeglut3-dev doxygen graphviz libpng12-dev libgtest-dev libxmu-dev libxi-dev libpcap-dev libqhull-dev libvtk5-qt4-dev python-vtk libvtk-java 3、编译安装 编译时间非常长,可能1小时内结束不了,编译前请考虑清楚。线程数根据情况选择 $ cd pcl $ mkdir build $ cd build $ cmake -D CMAKE_BUILD_TYPE=None -D BUILD_GPU=ON -D BUILD_apps=ON -D BUILD_examples=ON .. $ make -j4 $ sudo make install =====================可能会出现的问题============================ #-------------------问题描述-------------------# 安装PCL依赖时libvtk5-qt4-dev无法安装, 报错信息:E: Unable to correct problems, you have held broken packages. sudo apt-get install libvtk5-qt4-dev Reading package lists... Building dependency tree... Reading state information... Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: libvtk5-qt4-dev : Depends: libvtk5-dev (= 5.10.1+dfsg-2.1build1) but it is not going to be installed E: Unable to correct problems, you have held broken packages. #-------------------问题分析-------------------# 应该是后来安装其他东西做了一些改动,初步推断ROS依赖 #-------------------解决方案-------------------# $ sudo apt-get upgrade $ sudo apt-get update 并且推荐使用 aptitude工具,运行以下命令 sudo aptitude install libvtk5-qt4-dev #-------------------重要记录-------------------# 为了解决上述问题,在运行下列命令时,似乎我的ROS依赖被删除了不少 $ sudo apt-get install libvtk5-dev 然后再安装 $ sudo apt-get install libvtk5-qt4-dev [警告】是否会影响到ROS?未知! =======================solved=============================== 详情见日志/安装PCL点云库依赖出错记录日志.txt
-
P116 安装Ceres
sudo apt-get install liblapack-dev libsuitesparse-dev libcxsparse3.1.4 libgflags-dev libgoogle-glog-dev libgtest-dev cd ~/src git clone https://github.com/ceres-solver/ceres-solver.git cd Ceres mkdir build cd build cmake .. make -j4 sudo make install
-
P122 安装g2o
sudo apt-get install libqt4-dev qt4-qmake libqglviewer-dev libsuitesparse-dev libcxsparse3.1.4 libcholmod3.0.6 * 安装g2o点云库,下载g2o源代码 git clone https://github.com/RainerKuemmerle/g2o.git 或者可以使用3rdparty/文件夹下的g2o库,建议使用书中的版本,原因:版本不匹配易造成Error cd <path_to_g2o> mkdir build cd build cmake .. make -j4 sudo make install
-
P264 安装Meshlab
sudo add-apt-repository ppa:zarquon42/meshlab sudo apt-get update sudo apt-get install meshlab
-
P274安装g2o_viewer
安装g2o的时候g2o_viewer组件已安装。
可能出现的错误:运行g2o_viewer之后报错:(core dumped)
尚未解决
-
P289安装gstam
sudo apt-get install libtbb-dev cd ~/src git clone https://bitbucket.org/gtborg/gtsam.git cd gtsam mkdir build cd build cmake .. make -j4 sudo make install
-
P307安装DBoW3
cd ~/src git clone https://github.com/rmsalinas/DBoW3.git cd DBoW3 mkdir build cd build cmake .. make -j4
-
P350安装Octomap
sudo apt-get install doxygen cd ~/src git clone https://github.com/Octomap/octomap.git cd octomap mkdir build cd build camke .. make -j4 sudo make install =====================可能会出现的问题============================ #-------------------问题描述-------------------# Ubuntu1604使用octovis模块打开已有的八叉树地图时,便会出现一大堆乱码,乱码最后有一个Core Dumped 报错关键词:Core Dumped #-------------------问题分析-------------------# 依赖冲突 #-------------------解决方案-------------------# 先安装依赖 $ sudo apt-get install libqglviewer-dev-qt4 然后重新编译安装Octomap 在编译安装OctoMap后,可以再重新安装回libqglviewer-dev,以便为其他功能模块,如g2o提供依赖项: $ sudo apt-get install libqglviewer-dev 因为libqglviewer-dev-qt4和libqglviewer-dev只能存在一个,但libqglviewer-dev-qt4并不能支持g2o。安装回libqglviewer-dev是不会影响octovis的使用的,因为它影响的只是OctoMap的编译安装。 #-------------------参考-------------------# http://www.cnblogs.com/hitlrk/p/6667253.html 上述方法依旧无法解决! =======================unsolved===============================
/*
* Copyright (C) 2018 <william yu> <[email protected]>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
本项目文件源码移植复制自于高翔视觉slam十四讲源码,版权归原作者所有