Spotify Connect client for the Raspberry Pi that Just Works™.
Install the Spotify Connect client on your Raspberry Pi,
curl -sL https://dtcooper.github.io/raspotify/install.sh | sh
Raspotify is a Spotify Connect client for Raspbian on the Raspberry Pi that Just Works™. Raspotify is a Debian package and associated repository which thinly wraps the awesome librespot library by Paul Lietar and others. It works out of the box on all three revisions of the Pi, immediately after installation.
Head on over to the releases page to download themost recent version and install the Debian package. Or follow the directions below.
Raspotify works on a Raspberry Pi running Raspbian. You'll need a Spotify Premium account in order to use Connect.
Raspotify should work on any Pi but it has been tested on,
- Raspberry Pi (v1) model B
- Raspberry Pi 2 model B
- Raspberry Pi 3 model B and B+
This command downloads and installs the Debian package and adds its apt repository, which ensures you'll always be up to date with upstream changes.
curl -sL https://dtcooper.github.io/raspotify/install.sh | sh
That's it! Plug a speaker into your Pi on your local network, select the device in Spotify et voilà!
Essentially, here's what the easy installer does,
# Install curl and https apt transport
sudo apt-get -y install curl apt-transport-https
# Add repo and its GPG key
curl -sSL https://dtcooper.github.io/raspotify/key.asc | sudo apt-key add -v -
echo 'deb https://dtcooper.github.io/raspotify jessie main' | sudo tee /etc/apt/sources.list.d/raspotify.list
# Install package
sudo apt-get update
sudo apt-get -y install raspotify
Or just download the latest .deb package and install it manually:
To uninstall, remove the package,
sudo apt-get remove -y raspotify
To completely remove Raspotify and its Debian repository from your system try,
sudo apt-get remove -y --purge raspotify
sudo rm -v /etc/apt/sources.list.d/raspotify.list
Raspotify works out of the box and should be discoverable by Spotify Connect on
your local network, however you can configure it by editing /etc/default/raspotify
which passes arguments to librespot.
# /etc/default/raspotify -- Arguments/configuration for librespot
# Device name on Spotify Connect
#DEVICE_NAME="raspotify"
# Bitrate, one of 96 (low quality), 160 (default quality), or 320 (high quality)
#BITRATE="160"
# Additional command line arguments for librespot can be set below.
# See `librespot -h` for more info. Make sure whatever arguments you specify
# aren't already covered by other variables in this file. (See the daemon's
# config at `/lib/systemd/system/raspotify.service` for more technical details.)
#
# To make your device visible on Spotify Connect across the Internet add your
# username and password which can be set via "Set device password", on your
# account settings, use `--username` and `--password`.
#
# To choose a different output device (ie a USB audio dongle or HDMI audio out),
# use `--device` with something like `--device hw:0,1`. Your mileage may vary.
#
#OPTIONS="--username <USERNAME> --password <PASSWORD>"
# Uncomment to use a cache for downloaded audio files. Cache is disabled by
# default. It's best to leave this as-is if you want to use it, since
# permissions are properly set on the directory `/var/cache/raspotify'.
#CACHE_ARGS="--cache /var/cache/raspotify"
# By default, the volume normalization is enabled, add alternative volume
# arguments here if you'd like, but these should be fine.
#VOLUME_ARGS="--enable-volume-normalisation --linear-volume --initial-volume=100"
# Backend could be set to pipe here, but it's for very advanced use cases of
# librespot, so you shouldn't need to change this under normal circumstances.
#BACKEND_ARGS="--backend alsa"
After editing restart the daemon by running: sudo systemctl restart raspotify
All that's required is Docker on a *nix system with git and Make. It can be built on any amd64 platform that runs docker using Raspberry Pi's cross-compiler (tested on Ubuntu 16.04 LTS and macOS El Capitan).
git clone https://github.com/dtcooper/raspotify
cd raspotify
make
There should be a built Debian package (a .deb
file) in your project directory.
You can actually use GitHub to host an APT repository for Raspotify as I have done, but that's very much out of the scope of this Readme. Have a look at the Makefile's
apt-repo
andapt-deploy
directives, and itsAPT_GPG_KEY
andAPT_GH_PAGES_REPO
variables. You'll at least need this repository cloned on GitHub, GitHub Pages enabled for thegh-pages
branch, and a GPG key. I can't and won't support any users trying to do this at this time, but have fun and good luck!
My volume on Spotify is 100% and it's still too quiet!
Have you tried turning the volume up using the command alsamixer
?
Other issues
File an issue and if we get it sorted, I'll add to this list.
If you're so inclined, Bitcoin my address is 1PoDcAStyJoB7zZz2mny4KjtjiEu8S44ns
. :)
(I'd rather you donate to librespot instead, but there's no public address for those folks.)
...and remember kids, have fun!
This project is licensed under the MIT License - see the LICENSE
file for details.
Special thanks to Paul Lietar for librespot (and its additional authors), which Raspotify packages. Without librespot, Raspotify would simply not exist.