calerouxz / temperkb-case

For sharing and documenting my case design for the Temper keyboard.

Temper Gasket Case

This is a case for Raeedcho's Temper keyboard.

Objectives for the case

When designing this case for the Temper, I had the following objectives:

1. Include a 'gasket' mounting method.
2. Add some refinement to the case, creating a more end-product feeling design.
3. Include an easier to use on/off switch that fits onto the small one on the board.

Documentation

The following documentation is meant to help you build the case:

1. BOM (Bill of Materials)
2. 3D print guide
3. Build guide
4. Change log

Complexity

Keep in mind that this is a relatively complex assembly and does require additional hardware (screws, heat-set inserts and o-rings). There is also a fair amount of 3D printed parts that need to fit together.

Pictures