brocci / cosa-domotica

Home Automation with the Cosa Arduino OOP Framework

Cosa-Domotica

This Cosa library is a framework for Home Automation (Domotica) with cheap RF433 transmitter and receiver modules.

Domotica supports the following message:

• [Accelerometer] (./RF433/DomoticaADXL345)
• [Analog Pin] (./RF433/DomoticaAnalogPin)
• [Digital Pin] (./RF433/DomoticaDigitalPin)
• [Digital Pins] (./RF433/DomoticaDigitalPins)
• [Humidity and Temperture Sensor] (./RF433/DomoticaDHT11)
• [Info String] (./RF433/DomoticaInfo)
• [Network Time Service] (./RF433/DomoticaClock)
• [Thermometer] (./RF433/DomoticaDS18B20)

The messages can be used both for peer-to-peer or broadcast communication.

The demonstation sketches for monitoring messages are:

• [LCD] (./RF433/DomoticaMonitor)
• [Serial] (./RF433/DomoticaTrace)

The framework supports low power mode with power down sleep or awake on external interrupt.

• [Button] (./RF433/DomoticaWakeup)
• [Device Interrupt] (./RF433/DomoticaADXL345)

Install

To use this library you must download and install the [Arduino IDE] (http://www.arduino.cc/en/Main/Software) (or GCC AVR toolchain) and [Cosa] (https://github.com/mikaelpatel/Cosa).

Download and unzip the Cosa-Domotica library into your sketchbook libraries directory. Rename from Cosa-Domotica-master to Domotica.

The Domotica library and examples should be found in the Arduino IDE File>Sketchbook menu. Open the DomoticaMonitor example sketch. Select the Cosa core by selecting one of the Cosa boards in the Tools>Board menu.