bluerobotics / bluerobotics_tsys01_library

Arduino library for the TSYS01 temperature sensor.

BlueRobotics TSYS01 Temperature Sensor Library

Arduino library for the TSYS01 temperature sensor. The TSYS01 is a high-accuracy, fast-response subsea temperature sensor from Measurement Specialties.

Documentation

Please see the examples for normal operation. Below are the available functions used in the library.

TSYS01();

/** Initialize the sensor - return false if not detected.
 */
bool init();

/** The read from I2C takes up for 40 ms, so use sparingly is possible.
 */
void read();

/** This function loads the datasheet test case values to verify that
 *  calculations are working correctly. 
 */
void readTestCase();

/** Temperature returned in deg C.
 */
float temperature();

Versions

• 1.0.1 - added initialization validation
• 1.0.0 - initial release
• 0.0 - Under development

Reference

You can find the TSYS01 datasheet here.

bluerobotics_tsys01_library's Issues

Help with driver for TI CC1352P7

Hello, I'm trying to make negotiation between your TSYS01 and Texas Instruments CC1352P7 LaunchPad Kit

I connected the TSYS01 sensor to the I2C (DIO5/10 and DIO21/9) and used the i2ctmp example in order to trigger the sensor. Unfortunately the output is always: 0.

There is a library for arduino board but I have a problem converting it to CPP in CCStudio.

Can you help with that?
Thanks!

Not working with Arduino Uno R4 WiFi board

I have tested the library with both r3 and r4 using the example program given with the library. In r3 it is working without any issues. In r4 it is showing 'initialization failed'.

Any help would be much appreciated in this regard.