betovar / dmx_shield Goto Github PK

LeafLabs DMX-Maple Project

  created by Brian Tovar
  with help from Rurik Primiani and Blake Rego
  for LeafLabs Maple Native
  created  11 Nov 2011


DMX Shield Project Summary:

This repository is an open hardware add-on for the maple native platform.
It incorporates three hardware features into a single shield: first, the DMX
physical layer protocol operates on RS-485 differential signaling; second,
audio is played through an audio codec chip; and third, a source of recorded media is made available through an SD card slot.

A demonstration sketch for the DMX protocol is available here: 
https://github.com/leaflabs/projects/tree/master/dmx-512
with other examples to be committed later


Shield Features:

-- SD / microSD card slot (choice of either)
-- line_in jack (with alternate breakouts)
-- headphone_out jack (with alternate breakouts)
-- mic bias tuning knob
-- solder jumper for electric micphone configuration
-- input and output channel swap switches
-- four general purpose buttons (one with breakout)
-- three general purpose knobs (one for digital volume control)
-- DMX driver/receiver (using RJ45 connector)
-- power LED and two general purpose LEDs