belangeo / cecilia5 Goto Github PK
View Code? Open in Web Editor NEWEar-bending noises and music
Ear-bending noises and music
Windows Vista x86 - Cecilia version 5.0.2
Mousing over any of the 'output' buttons (speaker/scissors/folder/arrows) will
trigger playback in certain circumstances, as though you had clicked the
triangle in the top left of the interface. Clicking the triangle in the top
left of the interface will restart playback, from which you can stop playback
as normal. Once this has happened once during a session, it will consistently
happen again and again until Cecilia is restarted. I've tried very hard to
reproduce this consistently, but I'm afraid I am stuck. I've had this happen
several times when using the Granulator module.
Apologies for being vague - I hope this is useful information.
Original issue reported on code.google.com by [email protected]
on 9 Feb 2012 at 3:28
Quick note with info from console attached.
Cecilia 5.0.6
os x 10.7.4
Original issue reported on code.google.com by [email protected]
on 8 Jun 2012 at 1:06
Attachments:
Le problème semble généralisé. Le crash ne survient pas toujours au premier
changement de preset. Parfois le seul message est celui-ci:
Sun Feb 19 13:37:59 JeanElektra-3.local Python[33582] <Error>:
kCGErrorIllegalArgument: CGSGetWindowBounds: NULL window
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 6:40
NUmber of grans and grain duraiton need init.
Original issue reported on code.google.com by [email protected]
on 30 Jul 2012 at 1:42
am et fm mod non-fonctionnels.
Original issue reported on code.google.com by [email protected]
on 31 Jul 2012 at 2:09
What steps will reproduce the problem?
1. opening cecilia5.0.3
What version of the product are you using? On what operating system?
cecilia5.0.3 / osx 10.7.3
Please provide any additional information below.
i installed pyo, python and numpy.
Original issue reported on code.google.com by [email protected]
on 16 Apr 2012 at 9:02
Si on change de preset pendant que ca joue = crash
trois modules essayés
Original issue reported on code.google.com by [email protected]
on 9 Jan 2012 at 6:55
Dans les cas où il y a un popup permettant de spécifier une liste de valeur,
Appuyer "Apply" semble entrer les données mais la popup ne se ferme pas
Dans module Granulator.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 3:29
Charger un module. Charger un son
Ajouter un post-processing (e.g. Chorus). Activer l'enregistrement d'un des
paramètres. Durant la performance bouger le bouton.
À la fin de la performance, le bouton stop ne revient pas au bouton play.
On peut alors manuellement cliquer sur stop.
Le paramètre dont l'enregistrement était activé reste rouge et ne tourne pas
au vert. De plus la courbe nouvellement enregistrée ne s'affiche pas.
Si on met manuellement le paramètre en playback (vert), le paramètre
évoluera tel qu'il a été enregistré mais la courbe ne s'affiche pas.
Plus étrange encore, si on se met à changer manuellement la courbe qui est
affichée dans la section graph, la courbe enregistrée apparait en arrière
plan mais ne peut jamais venir en avant-plan et être modifiée.
Original issue reported on code.google.com by [email protected]
on 4 Feb 2012 at 6:46
La section de modulation de fréquence fonctionne de façon erratique. Pas la
bonne forme d'onde + fréquence irrégulière.
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 6:04
Pour être bien utile on devrait pouvoir packer les demis sliders dans l'ordre
où ils sont déclarés. Si on a un seul demi slider entre deux sliders pleine
dimension, il devrait se packer à gaunche ou a droite et laisser une espace
vide là où devrait se trouver le second demi-slider...
Ainsi, on pourrait faire des groupes: un full slider / 2 demi-sliders, un full
slider / 2 demi-sliders,, etc...
Original issue reported on code.google.com by [email protected]
on 21 Jul 2012 at 10:12
Crash
Original issue reported on code.google.com by [email protected]
on 9 Jan 2012 at 6:40
What steps will reproduce the problem?
1. Play around with various parameters before playback, so that "loading
buffers" will be forced
2. This will NOT happen every time (not at all), but it is happening often
enough to be very annoying. Version 5.0.7 is terribly unstable on my system.
What is the expected output? What do you see instead?
To not crash ...
What version of the product are you using? On what operating system?
Version 5.0.7. OS X 10.7.4 on MacBook Pro i5 2.4GHz.
Please provide any additional information below.
Crash report is included in file.
Original issue reported on code.google.com by [email protected]
on 27 Jun 2012 at 10:04
Attachments:
Ouvrir Cecile
Choisir Degrade.C5
Loader un son
choisir le preset Destroyed
Lancer
Stopper (avec le clavier ou le bouton, c'est pareil)
Choisir un autre preset.
Crash.
Removed stream id 132
Sun Feb 19 13:31:06 JeanElektra-3.local Python[33428] <Error>:
kCGErrorIllegalArgument: CGSGetWindowBounds: NULL window
Python(33428,0xa0c5d540) malloc: *** error for object 0x16228a04: incorrect
checksum for freed object - object was probably modified after being freed.
*** set a breakpoint in malloc_error_break to debug
Python(33428,0xa0c5d540) malloc: *** error for object 0x16228a00: incorrect
checksum for freed object - object was probably modified after being freed.
*** set a breakpoint in malloc_error_break to debug
Python(33428,0xa0c5d540) malloc: *** error for object 0x16224c04: incorrect
checksum for freed object - object was probably modified after being freed.
*** set a breakpoint in malloc_error_break to debug
Python(33428,0xa0c5d540) malloc: *** error for object 0x16224c00: incorrect
checksum for freed object - object was probably modified after being freed.
*** set a breakpoint in malloc_error_break to debug
Bus error
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 6:35
syntaxe:
port:adress
9000:1
donne un crash
Fri Jul 6 21:58:27 vpn-10-39-1-184.acd.umontreal.ca Python[7635] <Error>:
kCGErrorIllegalArgument: CGSGetWindowBounds: NULL window
liblo server error 9904 in path (null): cannot find free port
Bus error
OSC testé et fonctionnel dans max/msp
Original issue reported on code.google.com by [email protected]
on 7 Jul 2012 at 2:05
Pas sûr...
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 10:58
idem stochgrains.c5
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 11:18
Parfois le crash survient même sans avoir toucher la fenètre de Cecilia.
Toujours ce message
Sun Feb 19 13:37:59 JeanElektra-3.local Python[33582] <Error>:
kCGErrorIllegalArgument: CGSGetWindowBounds: NULL window
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 6:54
Load son (moyen long)
Load n'importe quel module "sampler"
À 10.5 secondes, il y a un pitch shift d'un quart de ton.
Ça semble être dans tous les modules et pour tous les sons.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 7:03
Charger un module.
Charger un son. Enregistrer l'automation d'un premier slider. Changer la
précision de la courbe avec le petit slider de précision.
Enregistrer une seconde courbe d'automation avec un autre slider. Après la
dite performance, lorsque la courbe s'affiche, la précision de la courbe ne
correspond pas à la position du slider. Comme si la position du slider
n'était pas réinitialisée ou la courbe s'affichait avec une précision par
défaut.
Original issue reported on code.google.com by [email protected]
on 4 Feb 2012 at 6:25
1- Attaque très lente dans tous les cas.
2- Niveau très faible en général
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 5:55
What steps will reproduce the problem?
1. Open the Stochastic Generator
2. Choose the Weibull distribution
3. Set the x1 parameter to 0.0 and click on Apply.
What is the expected output? What do you see instead?
There is a ZeroDivisionError instead of a new curve generated.
In terminal:
Traceback (most recent call last):
File "/Users/juliedelisle/svn/cecilia5/Resources/Widgets.py", line 3305, in MouseDown
self.maps[tool]()
File "/Users/juliedelisle/svn/cecilia5/Resources/Widgets.py", line 3310, in onApply
self.outFunction[self.tools.index('Apply')]()
File "/Users/juliedelisle/svn/cecilia5/Resources/Widgets.py", line 3676, in OnApply
dict = self.weibullGenerate(interp, points, mini, maxi, x1, x2)
File "/Users/juliedelisle/svn/cecilia5/Resources/Widgets.py", line 3787, in weibullGenerate
y = random.weibullvariate(x2, x1)
File "/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/random.py", line 639, in weibullvariate
return alpha * pow(-_log(u), 1.0/beta)
ZeroDivisionError: float division
Please use labels and text to provide additional information.
Original issue reported on code.google.com by delisle.julie
on 30 Jul 2012 at 5:44
Charger Degrade.c5
Charger un son.
Met le slider "Bit Depth" en mode rec. Appuyer sur Play. Jouer avec le slider
pour créer des courbes pendant, disons, 15 secondes. Stop la performance avant
la fin.
La courbe qui s'affiche ne se positionne pas au bon endroit dans le temps.
Comme si le scaling n'était pas bon vu que la performance a été interrompue
avant la fin.
La représentation des courbes est cependant exacte si on se rend jusqu'à la
fin de la performance.
Original issue reported on code.google.com by [email protected]
on 4 Feb 2012 at 6:18
What steps will reproduce the problem?
1. Open a module, load a sound
2. Open another sound in it's place from the same folder
3. Program unexpectedly quits
What is the expected output? What do you see instead?
What version of the product are you using? On what operating system?
Cecilia 5.0.3 on an Imac quad core running Mac OS 10.7.3
Please provide any additional information below.
I have been using Cecilia 4.2 for some time with no issues - I started using 5
because the granulator is really awesome but it keeps quitting.. Any help much
appreciated.. Error report attached :)
Thanks,
Sophia
Original issue reported on code.google.com by [email protected]
on 3 May 2012 at 10:42
Attachments:
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 11 May 2012 at 3:33
Dans le premier slider du Phaser.c5, les valeurs du graph et du slider ne
correnspondent pas.
Il se peut que ça soit un problème général lorsqu'on traite de la
fréquence. Le slider devrait toujours être logarithmique
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 8:09
Ne fonctionne pas out-of-the-box. Probablemebnt une question de settings par
défaut...
Original issue reported on code.google.com by [email protected]
on 26 Aug 2012 at 1:24
Le jitter devrait être appliqué sur le temps des délais et non sur
l'amplitude des délais. C'est la seule façon de "chorusser"
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 7:01
Jamme sur le second "learn"
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 7:55
Pas très efficace en général. Il semble que le spectre de l'exciteur est
toujours prédominant.
Original issue reported on code.google.com by [email protected]
on 27 Aug 2012 at 12:13
Le shortcut de clavier "Commande-." semble cesser de fonctionner après un
certain nombre d'utilisations.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 3:31
Traceback (most recent call last):
File "/usr/local/lib/wxPython-unicode-2.8.11.0/lib/python2.6/site-packages/wx-2.8-mac-unicode/wx/_misc.py", line 1357, in Notify
self.notify()
File "/usr/local/lib/wxPython-unicode-2.8.11.0/lib/python2.6/site-packages/wx-2.8-mac-unicode/wx/_core.py", line 14742, in Notify
self.result = self.callable(*self.args, **self.kwargs)
File "/Users/fciadmin/cecilia5/Resources/CeciliaLib.py", line 74, in startCeciliaSound
getVar("audioServer").loadModule(getVar("currentModuleRef"))
File "/Users/fciadmin/cecilia5/Resources/audio.py", line 1154, in loadModule
del self.plugin1, self.plugin2, self.plugin3, self.out
AttributeError: AudioServer instance has no attribute 'plugin1'
The Server must be started!
Traceback (most recent call last):
File "/usr/local/lib/wxPython-unicode-2.8.11.0/lib/python2.6/site-packages/wx-2.8-mac-unicode/wx/_misc.py", line 1357, in Notify
self.notify()
File "/usr/local/lib/wxPython-unicode-2.8.11.0/lib/python2.6/site-packages/wx-2.8-mac-unicode/wx/_core.py", line 14742, in Notify
self.result = self.callable(*self.args, **self.kwargs)
File "/Users/fciadmin/cecilia5/Resources/CeciliaLib.py", line 74, in startCeciliaSound
getVar("audioServer").loadModule(getVar("currentModuleRef"))
File "/Users/fciadmin/cecilia5/Resources/audio.py", line 1154, in loadModule
del self.plugin1, self.plugin2, self.plugin3, self.out
AttributeError: AudioServer instance has no attribute 'plugin1'
The Server must be started!
Possible que ça soit du après du tripotage avec les presets.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 8:12
fonctionne sur slider mais pas sur range
Original issue reported on code.google.com by [email protected]
on 17 Jul 2012 at 5:36
Charger Degrade.c5.
Charger un son. J'ai voulu changé le nchnls mais le menu a un drole d'offset
qui fait que je ne vois que les dernières options (21 à 25).
OSX 10.6.8
Original issue reported on code.google.com by [email protected]
on 4 Feb 2012 at 6:00
le temps est-il venu?
Original issue reported on code.google.com by [email protected]
on 31 Jul 2012 at 2:01
What steps will reproduce the problem?
1. Cliquer sur la case channels.
What is the expected output? What do you see instead?
Je m'attends à voir une liste complète des choix offert, mais à la place je
vois les options de 20 à 25 après quoi il y a une grande section blanche. Il
est donc impossible de choisir 1, 2 ou 3 channels par exemple puisqu'ils sont
complètement hors de portée!
What version of the product are you using? On what operating system?
J'ai Cecilia 5.0.0 beta et je roule sur OSX Lion.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 2:28
debugué mon module combinant tous les types de filtrage,...
Ne marche pas en audio rate...
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 4:33
What steps will reproduce the problem?
1. Choose "Waveform Generator" in graphical Interface
2. Choose "Sine". It is now possible to adjust number of "Points".
3. Choose "Sawtooth" or "Square". It is no longer possible to adjust number of
"Points".
What is the expected output? What do you see instead?
It doesn't make any sense that you can adjust the number of function "Points"
only for Sine, and not the two other waveforms.
What version of the product are you using? On what operating system?
Cecilia 5.0.7 beta
Please provide any additional information below.
MacBook Pro i5 2.4GHz, OS X 10.7.4
Original issue reported on code.google.com by [email protected]
on 27 Jun 2012 at 11:18
FreqMod ne marche pas.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 9:58
Traceback (most recent call last):
File "/Users/fciadmin/cecilia5/Resources/CeciliaMainFrame.py", line 162, in onOpenBuiltin
CeciliaLib.openCeciliaFile(self, name, True)
File "/Users/fciadmin/cecilia5/Resources/CeciliaLib.py", line 545, in openCeciliaFile
getVar("audioServer").openCecFile(cecFilePath)
File "/Users/fciadmin/cecilia5/Resources/audio.py", line 1151, in openCecFile
CeciliaLib.getVar("mainFrame").onUpdateInterface(None)
File "/Users/fciadmin/cecilia5/Resources/CeciliaMainFrame.py", line 214, in onUpdateInterface
CeciliaLib.stopCeciliaSound()
File "/Users/fciadmin/cecilia5/Resources/CeciliaLib.py", line 88, in stopCeciliaSound
getControlPanel().transportButtons.setPlay(False)
File "/Users/fciadmin/cecilia5/Resources/CeciliaLib.py", line 54, in getControlPanel
return getVar('interface').getControlPanel()
AttributeError: 'NoneType' object has no attribute 'getControlPanel'
Original issue reported on code.google.com by [email protected]
on 19 Feb 2012 at 6:08
Quand on choisi un nouveau module pendant qu'un autre joue, crash.
Intercepter les nouvelles demande de module et envoyer un stop() avant de
tenter l'ouverture?
Original issue reported on code.google.com by [email protected]
on 9 Jan 2012 at 6:31
Preset garde le total time spécifié à la création du preset. Il devrait
garder le total_time courrant.
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 8:06
Harmonizer.c5 veut un filtre de sortie DC
Original issue reported on code.google.com by [email protected]
on 29 Jun 2012 at 9:37
With "Remember input sound" checked.
Original issue reported on code.google.com by [email protected]
on 11 May 2012 at 3:32
la vitesse doit être indépendante de la durée.
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 11:08
Python(26500,0xa003f540) malloc: *** mmap(size=261316608) failed (error code=12)
*** error: can't allocate region
*** set a breakpoint in malloc_error_break to debug
Bus error
jean-piches-macbook-pro:cecilia5 jeanpiche$
Les chiffres ne s'affichent pas. Le crash survient avant...
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 8:14
What steps will reproduce the problem?
1. Ouvrir n'importe quel module de synthèse. (J'ai principalement utilisé
celui de synthèse additive)
2. Travailler dans Cecilia pendant environ 5 minutes. Jouer avec les sliders et
l'enveloppe d'amplitude.
3. Appuyer plusieurs fois sur play/stop pour prévisualiser les sons.
What is the expected output? What do you see instead?
Après avoir travailler pendant en moyenne 5 minutes dans le module, Cecilia
gèle pendant 2 secondes au moment où je clique sur play et fini par planter.
Le phénomène se reproduit chaque fois que je travaille dans Cecilia.
What version of the product are you using? On what operating system?
J'utilise la version 5.0.0 avec OSX Lion.
Please provide any additional information below.
Original issue reported on code.google.com by [email protected]
on 10 Feb 2012 at 2:37
freqMod and Amp mod ne répondent pas en audio rate.
Original issue reported on code.google.com by [email protected]
on 29 Jul 2012 at 10:54
What steps will reproduce the problem?
1. Run Cecilia5 from the command line.
What is the expected output? What do you see instead?
Cecilia5 should run. Instead, the following error appears:
Unable to access the X Display, is $DISPLAY set properly?
What version of the product are you using? On what operating system?
5.0.5
Archlinux
Please provide any additional information below.
Original issue reported on code.google.com by looplog
on 25 Jul 2012 at 6:11
What steps will reproduce the problem?
1.
2.
3.
What is the expected output? What do you see instead?
Please use labels and text to provide additional information.
Original issue reported on code.google.com by [email protected]
on 30 Jul 2012 at 7:42
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.