☝️ Greenkeeper’s updated Terms of Service will come into effect on April 6th, 2018.

Version 11.6.0 of nyc was just published.

This version is covered by your current version range and after updating it in your project the build failed.

nyc is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organiszation’s settings page, under Installed GitHub Apps.

Version 2.3.0 of nomatic-events was just published.

This version is covered by your current version range and after updating it in your project the build failed.

nomatic-events is a direct dependency of this project, and it is very likely causing it to break. If other packages depend on yours, this update is probably also breaking those in turn.

Your Greenkeeper Bot 🌴

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

Version 0.5.1 of source-map-support was just published.

This version is covered by your current version range and after updating it in your project the build failed.

source-map-support is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

The devDependency coveralls was updated from 3.0.3 to 3.0.4.

🚨 View failing branch.

This version is covered by your current version range and after updating it in your project the build failed.

coveralls is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

The devDependency semantic-release was updated from 15.13.15 to 15.13.16.

🚨 View failing branch.

This version is covered by your current version range and after updating it in your project the build failed.

semantic-release is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

The devDependency ts-node was updated from 8.1.0 to 8.1.1.

🚨 View failing branch.

This version is covered by your current version range and after updating it in your project the build failed.

ts-node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 4.1.3 of @types/chai was just published.

This version is covered by your current version range and after updating it in your project the build failed.

@types/chai is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 5.1.0 of cross-env was just published.

This version is covered by your current version range and after updating it in your project the build failed.

cross-env is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

☝️ Greenkeeper’s updated Terms of Service will come into effect on April 6th, 2018.

Version 5.1.4 of cross-env was just published.

This version is covered by your current version range and after updating it in your project the build failed.

cross-env is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 2.2.0 of nomatic-events was just published.

This version is covered by your current version range and after updating it in your project the build failed.

nomatic-events is a direct dependency of this project, and it is very likely causing it to break. If other packages depend on yours, this update is probably also breaking those in turn.

Your Greenkeeper Bot 🌴

Version 3.6.3 of node-gyp was just published.

This version is covered by your current version range and after updating it in your project the build failed.

node-gyp is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 8.2.0 of semantic-release was just published.

This version is covered by your current version range and after updating it in your project the build failed.

semantic-release is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 3.0.1 of coveralls was just published.

This version is covered by your current version range and after updating it in your project the build failed.

coveralls is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

The devDependency @types/mocha was updated from 5.2.6 to 5.2.7.

🚨 View failing branch.

This version is covered by your current version range and after updating it in your project the build failed.

@types/mocha is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 2.2.48 of @types/mocha was just published.

This version is covered by your current version range and after updating it in your project the build failed.

@types/mocha is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

Version 8.0.38 of @types/node was just published.

This version is covered by your current version range and after updating it in your project the build failed.

@types/node is a devDependency of this project. It might not break your production code or affect downstream projects, but probably breaks your build or test tools, which may prevent deploying or publishing.

Your Greenkeeper Bot 🌴

Version 4.6.1 of lodash.merge was just published.

This version is covered by your current version range and after updating it in your project the build failed.

lodash.merge is a direct dependency of this project, and it is very likely causing it to break. If other packages depend on yours, this update is probably also breaking those in turn.

Your Greenkeeper Bot 🌴

The ArangoDB adapter has now been pulled into its own project to make this project lighter. Because of this, all source code and dependencies can now be pulled from this project. nomatic-arangodb-adapter will still be a devDependency for testing purposes, since it is the only (known) adapter developed as of now.

Version 10 of Node.js (code name Dubnium) has been released! 🎊

To see what happens to your code in Node.js 10, Greenkeeper has created a branch with the following changes:

• Added the new Node.js version to your .travis.yml

If you’re interested in upgrading this repo to Node.js 10, you can open a PR with these changes. Please note that this issue is just intended as a friendly reminder and the PR as a possible starting point for getting your code running on Node.js 10.

Your Greenkeeper Bot 🌴

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

🚨 You need to enable Continuous Integration on all branches of this repository. 🚨

To enable Greenkeeper, you need to make sure that a commit status is reported on all branches. This is required by Greenkeeper because we are using your CI build statuses to figure out when to notify you about breaking changes.

Since we did not receive a CI status on the greenkeeper/initial branch, we assume that you still need to configure it.

If you have already set up a CI for this repository, you might need to check your configuration. Make sure it will run on all new branches. If you don’t want it to run on every branch, you can whitelist branches starting with greenkeeper/.

We recommend using Travis CI, but Greenkeeper will work with every other CI service as well.

Once you have installed CI on this repository, you’ll need to re-trigger Greenkeeper’s initial Pull Request. To do this, please delete the greenkeeper/initial branch in this repository, and then remove and re-add this repository to the Greenkeeper integration’s white list on Github. You'll find this list on your repo or organization’s settings page, under Installed GitHub Apps.

Version 1.0.3 of nomatic-arangodb-adapter just got published.

This version is covered by your current version range and after updating it in your project the build failed.

As nomatic-arangodb-adapter is “only” a devDependency of this project it might not break production or downstream projects, but “only” your build or test tools – preventing new deploys or publishes.

I recommend you give this issue a high priority. I’m sure you can resolve this 💪

Your Greenkeeper Bot 🌴