bborncr / ledcuberx

4x4x4 LED Cube driver for Arduino and 3 Shift Registers

LedcubeRX

4x4x4 LED Cube driver for Arduino and 3 Shift Registers Physically the cube is a positive anode

This driver creates a multiplexor using a timer interrupt. So all that needs to be done is change the values in the array named matrix[]. The interrupt automatically paints the cube.

Usage:

The data for the cube is kept in matrix[level]=<16 bits of led data>

//This would turn all the LEDs off matrix[0]=0b0000000000000000; matrix[1]=0b0000000000000000; matrix[2]=0b0000000000000000; matrix[3]=0b0000000000000000;

//This would turn one LED on in the corner on level 0 matrix[0]=0b0000000000000001;