atrides / eth-proxy Goto Github PK
View Code? Open in Web Editor NEWStratum proxy for Ethereum
License: Other
Stratum proxy for Ethereum
License: Other
If you cared. The rewards is near. Do not fear. Fourth I am here, nowHere! Can you relate then please inticipate.
Hi
Is eth-proxy still active? Although I installed the software, I could not make the rig connections. Do miner software and pools still support
From time to time I can see strange error messages with a Traceback. What's the problem here?
2016-04-14 19:29:28,890 INFO proxy # NEW_JOB MAIN_POOL
Unhandled error in Deferred:
Traceback (most recent call last):
Failure: stratum.custom_exceptions.TransportException: SocketTransportClientFactory connection timed out
2016-04-14 19:29:34,910 INFO proxy # NEW_JOB MAIN_POOL
Hi !
Just reporting an issue that appears 2 days ago. My proxy is running for quite some times without any troubles until that happened :
WARNING proxy # Job timeout. Proxy is waiting for an updated job. Please restart proxy!
It loops over and over again without any clear reasons and obviously stopped my rigs from minning.
It happens twice a day now.
The miner is Claymore.
@Atrides Thx
I have 3 computers , one is used to run eth-proxy , the other 2 are used to run ethminer .
Computer 1 :
IP:192.168.80.113
ethproxy -H 192.168.80.113 -P 8080 -W xxxxx -PH eth.f2pool.com -PP 8080 -PHF1 eth.f2pool.com -PPF1 8080 -PHF2 eth.f2pool.com -PPF2 8080 -PHF3 eth.f2pool.com -PPF3 8080
Computer 2:
IP:192.168.80.186
./ethminer --farm-recheck 200 -G -F http://192.168.80.113:8080/rig1
Computer 3:
IP:192.168.80.205
./ethminer --farm-recheck 200 -U -F http://192.168.80.113:8080/rig2
When eth-proxy tells me a solution is accepted by f2pool , How do I find which ethminer solve it . Can it be shown like this below ?
With 2x GTX 1070 8Go and ethminer I'm getting around 57 MH/s out of the box
With 2x GTX 1070 and ethminer + eth proxy it's around 67 MH/s out of the box and before overclocking.. Couldn't be happier, right ?
The only issue is after a few minutes the hash drops to 0 MH/s, and the whole system stops responding and I'm foced te reboot
I run Win 10 pro and have latest Nvidia drivers the 382.33 WHQL and I run Ethminer with -U since -G is giving me error "no GPU with enough memory found...) and I use Stratum
My start-mining.bat file looks like this:
setx GPU_FORCE_64BIT_PTR 0
setx GPU_MAX_HEAP_SIZE 100
setx GPU_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_SINGLE_ALLOC_PERCENT 100
ethminer.exe --farm-recheck 200 -U -F http://127.0.0.1:8080/
And my eth-proxy conf file looks like this:
# Select Ethereum ETH or Expanse EXP
COIN = "ETH"
# Host and port for your workers
HOST = "127.0.0.1"
PORT = 8080
# Coin address where money goes
WALLET = "MyAddress"
# It's useful for individually monitoring and statistic
ENABLE_WORKER_ID = 1
# On DwarfPool you have option to monitor your workers via email.
# If WORKER_ID is enabled, you can monitor every worker/rig separately.
MONITORING = 1
MONITORING_EMAIL = "MyEmail"
# Main pool
POOL_HOST = "eth-us.dwarfpool.com"
POOL_PORT = 8008
# Failover pool
POOL_FAILOVER_ENABLE = 1
POOL_HOST_FAILOVER1 = "eth-us2.dwarfpool.com"
POOL_PORT_FAILOVER1 = 8008
POOL_HOST_FAILOVER2 = "eth-eu.dwarfpool.com"
POOL_PORT_FAILOVER2 = 8008
POOL_HOST_FAILOVER3 = "eth-asia.dwarfpool.com"
POOL_PORT_FAILOVER3 = 8008
# Logging
LOG_TO_FILE = 1
# Enable debug
DEBUG = 0
Anyone experiencing the same issue ? Any ideas ?
Thanks for the wonderful project. My setup is a bit unique: I'm setting up eth-proxy behind a firewall that can only allow connection through a http/https proxy. In other words, all my machines can only talk to the outside world through this proxy. I wonder if it's easy to support that? I can try to implement it given some pointer.
PS: I'm on Ubuntu 16.04
Thank you!
Hi,
when i will join my proxy with claymore, it says disconnect.
If i join other stratum Proxy Servers from other Pools, it works...
but why?
The Proxy is online and says
2017-08-18 23:51:06,657 INFO proxy # NEW_JOB MAIN_POOL
Looking on Website says also connected
My miner only supports stratum server, can I use this proxy? I tried to connect my miner to this proxy, it connects successfully, but never start mining.......
Is this normal?
Some mining on go with port 7007 port and this stratum port is 7117 and this is what used in open-ethereum-pool also...
2017-08-18 22:16:10,242 INFO stats # 1 peers connected, state changed 1 times
2017-08-18 22:16:10,243 INFO proxy # Connected to Stratum pool at my.site:7007
2017-08-18 22:16:48,689 INFO proxy # NEW_JOB MAIN_POOL
2017-08-18 22:19:52,278 INFO proxy # NEW_JOB MAIN_POOL
2017-08-18 22:23:45,372 INFO proxy # NEW_JOB MAIN_POOL
2017-08-18 22:25:01,970 INFO proxy # NEW_JOB MAIN_POOL
But nothing doing?
Claymore miner on my new port 7117 tried to connect but doing nothing...
this is config host and port
HOST = "0.0.0.0"
PORT = 7117
I dont see any users mining in this log?
Hello,
When using 0.0.5 it reports eth_submitWork from ''
instead of specifying the name.
Hello,
I'm using it with nanopool, and the reported hashrate is always 0, I believe that proxy is just not reporting it.
eth-proxy.exe was recently flagged as a virus by Windows Defender and deleted/quarantined right away.
VirusTotal scan (detection 7 / 55): https://www.virustotal.com/en/file/07e6cf2764e8c82cc7706196341019d20f816377271410e23db55fc705a0f53b/analysis/1458707901/
Could this be an actual backdoor in the executable? If not, is there any way to avoid the false positive?
Not so much of an issue but more of a question, if its even possible. Some mining pools require a username to credit you for the work you do (IE: Minergate). Is there a way to send username information from the proxy to connect and get the credit.
Minergate documentation shows the following information for connecting with "ethminer":
ethminer -G -S eth.pool.minergate.com:45791 -u "email address for your account"
Hello everybody. I was testing eth-proxy 0.0.5, searching for some bugs, and I believe that found one. Let me describe what I did.
1 - Disable network adapter
2 - Start eth-proxy.exe
3 - Console: exception "connection timed out"
4 - Enable network adapter (eth-proxy.exe still running)
5 - Console: "1 peers connected, state changed 1 times"
(repeats until reach 4 peers connected)
6 - Console: "Disconnected from Stratum pool at ..."
7 - Console: repeats numbers 5 and 6, infinite loop
I tried to access "http://127.0.0.1:8080" no response: GET connection refused.
I think this is simple to fix, just restart eth-proxy when exception has been threw. I hope this helps to improve eth-proxy. Bye guys.
Is it possible to use this proxy to connect directly to Parity via RPC?
Hello,
We getting error with mint.bitminter.com:333
Here this id debug
{"worker": "Proxy_0.0.5_debug", "jsonrpc": "2.0", "params": ["xxxx", "[email protected]"], "id": 2, "method": "eth_submitLogin"}
2017-05-21 20:25:49,375 DEBUG protocol protocol.lineReceived # > {u'id': 2, u'result': None, u'error': [20, u"Unknown method 'eth_submitLogin'", None]}
2017-05-21 20:25:49,375 WARNING protocol protocol.dataReceived # Failed message: local variable 'meta' referenced before assignment from 74.84.128.158
2017-05-21 20:25:49,375 INFO proxy <string>.on_disconnect # Disconnected from Stratum pool at us1.bitminter.com:3333
2017-05-21 20:25:49,375 INFO stats stats.print_stats # 0 peers connected, state changed 1 times
2017-05-21 20:25:49,375 DEBUG socket_transport socket_transport.clientConnectionLost # [Failure instance: Traceback (failure with no frames): <class 'twisted.internet.error.ConnectionLost'>: Connection to the other side was lost in a non-clean fashion.```
This is not a bug. Just to clarify if this proxy can be installed in a vps and then to use in my rig
the "http://vpsIP:8080/" instead of my own IP?
Could you publish spec of this stratum? In other words, what this proxy should send to server, what server should respond, error codes, etc.
Greetings,
Great tool here, easy to use.
I am requesting an additional feature:
It is necessary for my purposes to produce log files, time-stamped via file-name.
This could be accomplished with additional command line arguments.
Thanks,
coast
I using eth-proxy with 50 miners. Sometime i lost a lot of hashrate.
So how can i solver this ?
Thanks!
hello
can someone help me pls
py eth-proxy.py Traceback (most recent call last): File "C:\Users\oumish\Desktop\Nouveau dossier (2)\eth-proxy\eth-proxy.py", line 9, in <module> from stratum import settings File "C:\Users\oumish\Desktop\Nouveau dossier (2)\eth-proxy\stratum\__init__.py", line 1, in <module> from server.py import setup ModuleNotFoundError: No module named 'server'
thanks
says wrong wallet on debian with last vesion whatever I put as wallet
A declarative, efficient, and flexible JavaScript library for building user interfaces.
🖖 Vue.js is a progressive, incrementally-adoptable JavaScript framework for building UI on the web.
TypeScript is a superset of JavaScript that compiles to clean JavaScript output.
An Open Source Machine Learning Framework for Everyone
The Web framework for perfectionists with deadlines.
A PHP framework for web artisans
Bring data to life with SVG, Canvas and HTML. 📊📈🎉
JavaScript (JS) is a lightweight interpreted programming language with first-class functions.
Some thing interesting about web. New door for the world.
A server is a program made to process requests and deliver data to clients.
Machine learning is a way of modeling and interpreting data that allows a piece of software to respond intelligently.
Some thing interesting about visualization, use data art
Some thing interesting about game, make everyone happy.
We are working to build community through open source technology. NB: members must have two-factor auth.
Open source projects and samples from Microsoft.
Google ❤️ Open Source for everyone.
Alibaba Open Source for everyone
Data-Driven Documents codes.
China tencent open source team.