I have a bme280 sensor and I am trying to flash and run the bme280 example. I have added and compiled the components according to these instructions, https://github.com/atomvm/atomvm_lib/blob/master/markdown/components.md and flashed the new VM to the esp32. I am able to run blink and other examples from the top level directory. I run: rebar3 esp32_flash -p /dev/ttyUSB0 -b 115200 in the example directory and it successfully flashes the avm. when I connect to the device and monitor it I get this:

➜ esp32 git:(master) ✗ make monitor
Toolchain path: /home/alexander/esp/xtensa-esp32-elf/bin/xtensa-esp32-elf-gcc
Toolchain version: crosstool-ng-1.22.0-80-g6c4433a
Compiler version: 5.2.0
Python requirements from /home/alexander/esp/esp-idf/requirements.txt are satisfied.
MONITOR
--- idf_monitor on /dev/ttyUSB0 115200 ---
--- Quit: Ctrl+] | Menu: Ctrl+T | Help: Ctrl+T followed by Ctrl+H ---
ets Jun 8 2016 00:22:57

rst:0x1 (POWERON_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xee
clk_drv:0x00,q_drv:0x00,d_drv:0x00,cs0_drv:0x00,hd_drv:0x00,wp_drv:0x00
mode:DIO, clock div:2
load:0x3fff0018,len:4
load:0x3fff001c,len:6620
load:0x40078000,len:11020
ho 0 tail 12 room 4
load:0x40080400,len:6668
entry 0x40080778
I (70) boot: Chip Revision: 1
I (34) boot: ESP-IDF v3.2.5-1-g110d230e36-dirty 2nd stage bootloader
I (34) boot: compile time 13:41:48
I (34) boot: Enabling RNG early entropy source...
I (40) boot: SPI Speed : 40MHz
I (44) boot: SPI Mode : DIO
I (48) boot: SPI Flash Size : 4MB
I (53) boot: Partition Table:
I (56) boot: ## Label Usage Type ST Offset Length
I (63) boot: 0 nvs WiFi data 01 02 00009000 00006000
I (71) boot: 1 phy_init RF data 01 01 0000f000 00001000
I (78) boot: 2 factory factory app 00 00 00010000 001c0000
I (86) boot: 3 lib.avm RF data 01 01 001d0000 00040000
I (93) boot: 4 main.avm RF data 01 01 00210000 00100000
I (101) boot: End of partition table
I (105) esp_image: segment 0: paddr=0x00010020 vaddr=0x3f400020 size=0x1fa88 (129672) map
I (160) esp_image: segment 1: paddr=0x0002fab0 vaddr=0x3ffb0000 size=0x00560 ( 1376) load
I (160) esp_image: segment 2: paddr=0x00030018 vaddr=0x400d0018 size=0xa96bc (693948) map
0x400d0018: _stext at ??:?

I (410) esp_image: segment 3: paddr=0x000d96dc vaddr=0x3ffb0560 size=0x03a84 ( 14980) load
I (416) esp_image: segment 4: paddr=0x000dd168 vaddr=0x40080000 size=0x00400 ( 1024) load
0x40080000: _WindowOverflow4 at /home/alexander/esp/esp-idf/components/freertos/xtensa_vectors.S:1779

I (417) esp_image: segment 5: paddr=0x000dd570 vaddr=0x40080400 size=0x17858 ( 96344) load
I (465) esp_image: segment 6: paddr=0x000f4dd0 vaddr=0x400c0000 size=0x00064 ( 100) load
I (466) esp_image: segment 7: paddr=0x000f4e3c vaddr=0x50000000 size=0x00004 ( 4) load
I (486) boot: Loaded app from partition at offset 0x10000
I (486) boot: Disabling RNG early entropy source...
I (487) cpu_start: Pro cpu up.
I (490) cpu_start: Starting app cpu, entry point is 0x4008132c
0x4008132c: start_cpu1_default at /home/alexander/esp/esp-idf/components/esp32/cpu_start.c:452

I (0) cpu_start: App cpu up.
I (501) heap_init: Initializing. RAM available for dynamic allocation:
I (508) heap_init: At 3FFAE6E0 len 00001920 (6 KiB): DRAM
I (514) heap_init: At 3FFB9FE8 len 00026018 (152 KiB): DRAM
I (520) heap_init: At 3FFE0440 len 00003AE0 (14 KiB): D/IRAM
I (526) heap_init: At 3FFE4350 len 0001BCB0 (111 KiB): D/IRAM
I (533) heap_init: At 40097C58 len 000083A8 (32 KiB): IRAM
I (539) cpu_start: Pro cpu start user code
I (222) cpu_start: Starting scheduler on PRO CPU.
I (0) cpu_start: Starting scheduler on APP CPU.

###########################################################

   ###    ########  #######  ##     ## ##     ## ##     ## 
  ## ##      ##    ##     ## ###   ### ##     ## ###   ### 
 ##   ##     ##    ##     ## #### #### ##     ## #### #### 
##     ##    ##    ##     ## ## ### ## ##     ## ## ### ## 
#########    ##    ##     ## ##     ##  ##   ##  ##     ## 
##     ##    ##    ##     ## ##     ##   ## ##   ##     ## 
##     ##    ##     #######  ##     ##    ###    ##     ## 

###########################################################

I (323) AtomVM: Starting AtomVM revision 0.6.0-dev+git.fc5778c
I (323) AtomVM: Loaded BEAM partition main.avm at address 0x210000 (size=1048576 bytes)
I (383) AtomVM: Found startup beam bme280_example.beam
I (383) AtomVM: Loaded BEAM partition lib.avm at address 0x1d0000 (size=262144 bytes)
I (383) AtomVM: Starting bme280_example.beam...

CRASH

pid: <0.1.0>
cp: #CP<module: 0, label: 2, offset: 28>

x[0]: error
x[1]: {badmatch,{error,{bad_return_value,{badmatch,error}}}}

Stack

#CP<module: 0, label: 16, offset: 0>

Registers

x[0]: error
x[1]: {badmatch,{error,{bad_return_value,{badmatch,error}}}}
x[2]: []
x[3]: []
x[4]: []
x[5]: []
x[6]: []
x[7]: []
x[8]: []
x[9]: []
x[10]: []
x[11]: []
x[12]: []
x[13]: []
x[14]: []
x[15]: []

Mailbox

End Of Crash Report
AtomVM finished with return value: error
I (503) AtomVM: AtomVM application terminated. Going to sleep forever ...

Am I missing something here?