astrandb / automower_hass

Husqvarna Automower for Home Assistant

Åke Strandberg

Currently engaged in open-source projects such as:

• Home Assistant
  • easee_hass
  • miele
  • weatherlink
  • sentio
  • teracom
  • viva
• OPNsense

automower_hass's Issues

Add full list of potential error messages

automower_hass/custom_components/automower/const.py

Line 72 in a51c6f2

ERROR_MESSAGES = {

Full ist of error messages:
0: 'Unexpected error',
1: 'Outside working area',
2: 'No loop signal',
3: 'Wrong loop signal',
4: 'Loop sensor problem, front',
5: 'Loop sensor problem, rear',
6: 'Loop sensor problem, left',
7: 'Loop sensor problem, right',
8: 'Wrong PIN code',
9: 'Trapped',
10: 'Upside down',
11: 'Low battery',
12: 'Empty battery',
13: 'No drive',
14: 'Mower lifted',
15: 'Lifted',
16: 'Stuck in charging station',
17: 'Charging station blocked',
18: 'Collision sensor problem, rear',
19: 'Collision sensor problem, front',
20: 'Wheel motor blocked, right',
21: 'Wheel motor blocked, left',
22: 'Wheel drive problem, right',
23: 'Wheel drive problem, left',
24: 'Cutting system blocked',
25: 'Cutting system blocked',
26: 'Invalid sub-device combination',
27: 'Settings restored',
28: 'Memory circuit problem',
29: 'Slope too steep',
30: 'Charging system problem',
31: 'STOP button problem',
32: 'Tilt sensor problem',
33: 'Mower tilted',
34: 'Cutting stopped - slope too steep',
35: 'Wheel motor overloaded, right',
36: 'Wheel motor overloaded, left',
37: 'Charging current too high',
38: 'Electronic problem',
39: 'Cutting motor problem',
40: 'Limited cutting height range',
41: 'Unexpected cutting height adj',
42: 'Limited cutting height range',
43: 'Cutting height problem, drive',
44: 'Cutting height problem, curr',
45: 'Cutting height problem, dir',
46: 'Cutting height blocked',
47: 'Cutting height problem',
48: 'No response from charger',
49: 'Ultrasonic problem',
50: 'Guide 1 not found',
51: 'Guide 2 not found',
52: 'Guide 3 not found',
53: 'GPS navigation problem',
54: 'Weak GPS signal',
55: 'Difficult finding home',
56: 'Guide calibration accomplished',
57: 'Guide calibration failed',
58: 'Temporary battery problem',
59: 'Temporary battery problem',
60: 'Temporary battery problem',
61: 'Temporary battery problem',
62: 'Temporary battery problem',
63: 'Temporary battery problem',
64: 'Temporary battery problem',
65: 'Temporary battery problem',
66: 'Battery problem',
67: 'Battery problem',
68: 'Temporary battery problem',
69: 'Alarm! Mower switched off',
70: 'Alarm! Mower stopped',
71: 'Alarm! Mower lifted',
72: 'Alarm! Mower tilted',
73: 'Alarm! Mower in motion',
74: 'Alarm! Outside geofence',
75: 'Connection changed',
76: 'Connection NOT changed',
77: 'Com board not available',
78: 'Slipped - Mower has Slipped.Situation not solved with moving pattern',
79: 'Invalid battery combination - Invalid combination of different battery types.',
80: 'Cutting system imbalance: Warning',
81: 'Safety function faulty',
82: 'Wheel motor blocked, rear right',
83: 'Wheel motor blocked, rear left',
84: 'Wheel drive problem, rear right',
85: 'Wheel drive problem, rear left',
86: 'Wheel motor overloaded, rear right',
87: 'Wheel motor overloaded, rear left',
88: 'Angular sensor problem',
89: 'Invalid system configuration',
90: 'No power in charging station'

Add new models

automower_hass/custom_components/automower/const.py

Line 88 in 6fc0b59

"L": "Automower 315/X",

Please add new models, specifically 405x/415X.